SM15T33A-HE3/57T [VISHAY]
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor;型号: | SM15T33A-HE3/57T |
厂家: | VISHAY |
描述: | DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor 电视 |
文件: | 总5页 (文件大小:99K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SM15T Series
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• 1500 W peak pulse power capability with a
10/1000 µs waveform
• Available inuni-directional and bi-directional
DO-214AB (SMC)
• Excellent clamping capability
• Low inductance
PRIMARY CHARACTERISTICS
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
VBR
6.8 V to 220 V
PPPM
1500 W
6.5 W
• Solder dip 260 °C, 40 s
PD
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
I
FSM (uni-directional only)
TJ max.
200 A
150 °C
MECHANICAL DATA
APPLICATION NOTES
Case: DO-214AB (SMC)
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, high reliability/
automotive grade (AEC Q101 qualified)
A 1500 W (SMC) device is normally selected when the
threat of transients is from lightning induced transients,
conducted via external leads or I/O lines. It is also used
to protect against switching transients induced by
large coils or industrial motors. Source impedance at
component level in a system is usually high enough to
limit the current within the peak pulse current (I
rating of this series. In an overstress condition, the
failure mode is a short circuit.
)
PP
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3
suffix meets JESD 201 class 2 whisker test
TYPICAL APPLICATIONS
Polarity: For uni-directional types the band denotes
cathode end, no marking on bi-directional types
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional devices use CA suffix (e.g.
SM15T12CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
LIMIT
UNIT
Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1)
Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 3)
Power dissipation on infinite heatsink TA = 50 °C
PPPM
IPPM
1500
See next table
6.5
W
A
PD
W
A
Peak forward surge current 10 ms single half sine-wave uni-directional only (2)
IFSM
200
Operating junction and storage temperature range
TJ, TSTG
- 65 to + 150
°C
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal
Document Number: 88380
Revision: 21-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
SM15T Series
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
BREAKDOWN
VOLTAGE
CLAMPING
VOLTAGE
CLAMPING
VOLTAGE
DEVICE
MARKING
CODE
STAND-
OFF
VOLTAGE
TEST
CURRENT
LEAKAGE
CURRENT (3)
αT
Max.
(2)
V
C AT IPP
VC AT I
(1)
V
AT I
(V)
PP
BR
T
TYPE
I
T
10-4/°C
(10/1000 µs)
(8/20 µs)
I
RM AT VR
VRM (V)
(mA)
UNI
BI
MIN.
6.45
7.13
9.50
11.4
14.3
17.1
20.9
22.8
25.7
28.5
31.4
34.2
37.1
64.6
95.0
143
MAX.
7.14
7.88
10.5
12.6
15.8
18.9
23.1
25.2
28.4
31.5
34.7
37.8
41.0
71.4
105
(V)
(A)
(V)
(A)
746
690
538
461
368
308
254
234
207
187
169
156
143
83
SM15T6V8A
SM15T7V5A
SM15T10A
SM15T12A
SM15T15A
SM15T18A
SM15T22A
SM15T24A
SM15T27A
SM15T30A
SM15T33A
SM15T36A
SM15T39A
SM15T68A
SM15T100A
SM15T150A
SM15T200A
SM15T220A
GDE7 GDE7
5.80
6.40
8.55
10.2
12.8
15.3
18.8
20.5
23.1
25.6
28.2
30.8
33.3
58.1
85.5
128
1000
500
10.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
10
10.5
11.3
14.5
16.7
21.2
25.2
30.6
33.2
37.5
41.5
45.7
49.9
53.9
92.0
137
143
13.4
14.5
18.6
21.7
27.2
32.5
39.3
42.8
48.3
53.5
59.0
64.3
69.7
121
5.7
6.1
GDK7
GDT7
GDX7
BDK7
BDT7
BDX7
132
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
103
7.3
90.0
71.0
59.5
49.0
45.0
40.0
36.0
33.0
30.0
28.0
16.3
11.0
7.20
5.50
4.60
7.8
GEG7 GEG7
GEM7 BEM7
8.4
8.8
GET7
GEV7
GEX7
GFE7
BET7
GEV7
BEX7
BFE7
9.2
9.4
9.6
9.7
GFG7 GFG7
GFK7 BFK7
9.8
9.9
GFM7 BFM7
GGG7 GGG7
GGV7 GGV7
GHK7 GHK7
GHR7 GHR7
GHR8 GHR8
10.0
10.4
10.6
10.8
10.8
10.8
178
56
158
207
265
38
171
190
210
274
353
28
188
209
231
328
388
26
Notes:
(1) For bi-directional devices add suffix “CA” instead of “A”
(2) VBR measured after IT applied for 300 µs square wave pulse
(3) For bipolar devices with VR = 10 V or under, the IT limit is doubled
THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
VALUE
UNIT
Typical thermal resistance, junction to ambient air (1)
Typical thermal resistance, junction to leads
RθJA
75
15
°C/W
°C/W
RθJL
Note:
(1) Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
SM15T10A-E3/57T
SM15T10A-E3/9AT
SM15T10AHE3/57T (1)
SM15T10AHE3/9AT (1)
0.211
57T
9AT
57T
9AT
850
3500
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.211
0.211
0.211
3500
Note:
(1) Automotive grade AEC Q101 qualified
www.vishay.com
2
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88380
Revision: 21-Oct-08
SM15T Series
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(T = 25 °C unless otherwise noted)
A
20 000
10 000
100
Measured at
Zero Bias
10
1000
100
10
VR, Measured at
Stand-Off
Voltage, VWM
1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.31 x 0.31" (8.0 x 8.0 mm)
Uni-Directional
Bi-Directional
Copper Pad Areas
0.1
0.1 µs
1
10
100
400
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Figure 1. Peak Pulse Power Rating Curve
Figure 4. Typical Junction Capacitance Uni-Directional
100
75
100
10
1.0
0.1
50
25
0
0.001
0.01
0.1
1
10
100
1000
0
25
50
75
100 125
150 175
200
TJ - Initial Temperature (°C)
t - Pulse Duration (s)
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
Figure 5. Typical Transient Thermal Impedance
150
200
100
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
50
0
Half Value -
IPPM
IPP
2
10/1000 µs Waveform
as defined by R.E.A.
TJ = TJ max.
8.3 ms Single Half Sine-Wave
td
10
1.0
3.0
4.0
100
0
2.0
1
10
t - Time (ms)
Number of Cycles at 60 Hz
Figure 3. Pulse Waveform
Figure 6. Maximum Non-Repetitive Forward Surge Current
Uni-Directional Use Only
Document Number: 88380
Revision: 21-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
SM15T Series
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AB (SMC)
Mounting Pad Layout
Cathode Band
0.185 (4.69)
MAX.
0.126 (3.20)
0.114 (2.90)
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
MIN.
0.280 (7.11)
0.060 (1.52)
MIN.
0.260 (6.60)
0.012 (0.305)
0.006 (0.152)
0.320 REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
www.vishay.com
4
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88380
Revision: 21-Oct-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
SM15T33A-HE3/9AT
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
SM15T33A/9AT-E3
DIODE 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
SM15T33A/9T
Trans Voltage Suppressor Diode, 1500W, Unidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
SM15T33C/9
Trans Voltage Suppressor Diode, 1500W, Bidirectional, 1 Element, Silicon, DO-214AB, PLASTIC, SMC, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明