V60M120C-M3 [VISHAY]
Low forward voltage drop, low power losses;
| 型号： | V60M120C-M3 |
| 厂家： | 
VISHAY |
| 描述： | Low forward voltage drop, low power losses |
| 文件： | 总4页 (文件大小：129K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
V60M120C-M3, V60M120CHM3
www.vishay.com
Vishay General Semiconductor
Dual High-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.43 V at IF = 5 A
FEATURES
TMBS®
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
• High efficiency operation
TO-220AB
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
2
1
TYPICAL APPLICATIONS
V60M120C
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
PIN 1
PIN 3
PIN 2
CASE
MECHANICAL DATA
Case: TO-220AB
Molding compound meets UL 94 V-0 flammability rating
PRIMARY CHARACTERISTICS
Base P/N-M3
commercial grade
Base P/NHM3
AEC-Q101 qualified
-
halogen-free, RoHS-compliant, and
IF(AV)
2 x 30 A
120 V
VRRM
IFSM
-
halogen-free, RoHS-compliant, and
300 A
VF at IF = 30 A (TA = 125 °C)
TJ max.
0.69 V
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
175 °C
TO-220AB
Package
meets JESD 201 class 2 whisker test
Diode variations
Dual common cathode
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V60M120C
UNIT
Maximum repetitive peak reverse voltage
VRRM
120
60
V
per device
Maximum average forward rectified current (fig. 1)
per diode
IF(AV)
IFSM
30
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
300
Voltage rate of change (rated VR)
dV/dt
10 000
V/μs
°C
Operating junction and storage temperature range
TJ, TSTG
-40 to +175
Revision: 10-May-16
Document Number: 87781
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V60M120C-M3, V60M120CHM3
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IF = 5 A
IF = 15 A
SYMBOL
TYP.
0.51
0.68
0.86
0.43
0.58
0.69
75
MAX.
UNIT
-
TA = 25 °C
-
0.97
-
IF = 30 A
IF = 5 A
(1)
Instantaneous forward voltage per diode
VF
V
IF = 15 A
IF = 30 A
TA = 125 °C
-
0.77
-
TA = 25 °C
TA = 125 °C
TA = 25 °C
TA = 125 °C
μA
mA
μA
VR = 90 V
6.4
-
(2)
Reverse current per diode
IR
-
500
35
VR = 120 V
10
mA
Notes
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
Pulse test: Pulse width 5 ms
(2)
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V60M120C
UNIT
per diode
per device
per device
1.0
0.7
52
RJC
Typical thermal resistance (1)
°C/W
(2)
RJA
Notes
(1)
The heat generated must be less than the thermal conductivity from junction-to-ambient dPD/dTJ < 1/RJA
Free air, without heatsink
(2)
ORDERING INFORMATION (Example)
PACKAGE
TO-220AB
TO-220AB
PREFERRED P/N
V60M120C-M3/4W
V60M120CHM3/4W (1)
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1.89
1.89
4W
4W
50/tube
50/tube
Tube
Tube
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
70
60
50
40
30
20
10
0
22
20
18
16
14
12
10
8
D = 0.8
D = 0.5
D = 0.3
D = 0.2
D = 0.1
With heatsink, RthJC = 0.7 °C/W
D = 1.0
T
6
Free air, without heatsink,
RthJA = 52 °C/W
4
D = tp/T
tp
2
0
0
25
50
75
100
125
150
175
0
4
8
12 16 20 24 28 32 36
Case Temperature (°C)
Average Forward Current (A)
Fig. 2 - Forward Power Loss Characteristics Per Diode
Fig. 1 - Maximum Forward Current Derating Curve
(D = Duty Cycle = 0.5)
Revision: 10-May-16
Document Number: 87781
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V60M120C-M3, V60M120CHM3
www.vishay.com
Vishay General Semiconductor
10 000
100
10
1
T = 25 °C
J
f = 1.0 MHz
Vsig = 50 mVp-p
TA = 175°C
TA = 150°C
TA = 125°C
1000
TA = 100°C
TA = 25°C
0.1
100
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
100
1
TA = 175°C
Junction to Case
TA = 150°C
10
TA = 125°C
TA = 100°C
1
0.1
0.01
TA = 25°C
0.1
0.001
0.01
0.1
1
10
Pulse Duration (s)
t -
100
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.415 (10.54)
0.380 (9.65)
0.161 (4.08)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.139 (3.53)
0.113 (2.87)
0.103 (2.62)
0.603 (15.32)
0.635 (16.13)
0.573 (14.55)
0.350 (8.89)
0.625 (15.87)
PIN
2
1
3
0.330 (8.38)
0.160 (4.06)
0.140 (3.56)
1.148 (29.16)
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
0.104 (2.65)
0.096 (2.45)
0.022 (0.56)
0.014 (0.36)
Revision: 10-May-16
Document Number: 87781
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明