AMDIP1606L96B8Q1C [WALSIN]
High Attenuation on harmonic suppressed;型号: | AMDIP1606L96B8Q1C |
厂家: | Walsin Technology |
描述: | High Attenuation on harmonic suppressed |
文件: | 总6页 (文件大小:583K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
AMDIP Series – 1608(0603)- RoHS Compliance
MULTILAYER CERAMIC DIPLEXER
Halogens Free Product
2.4 / 5.0 GHz ISM Band RF Application
Automotive
Qualified to AEC-Q200
Preliminary
P/N: AMDIP1606L96B8Q1C
*Contents in this sheet are subject to change without prior notice.
Page 1 of 6
ASC_ AMDIP1606L96B8Q1C _V01
Aug. 2018
Approval sheet
FEATURES
1.
2.
3.
4.
Miniature footprint: 1.6 X 0.8 X 0.6 mm3
Low Insertion Loss
High Attenuation on harmonic suppressed
LTCC process
APPLICATIONS
1.
2.
3.
ISM 2.4 / 5.0 GHz band RF Application
Wi-Fi 802.11a/b/g/n Application
Automobile grade 2 & AEC-Q200 compliant
CONSTRUCTION
Top View
P6
P1
P5
P2
P4
PIN
Connection
1
1
2
3
4
5
6
GND
Common Port
GND
High Band Port
GND
P3
Low Band Port
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
W
T
1.60 ± 0.10
0.80 ± 0.10
0.60 max.
Top view
Side view
A
B
C
D
E
0.25 ± 0.05
0.30 ± 0.05
0.20 ± 0.05
0.20 ± 0.05
0.15 ± 0.05
Side view
Bottom view
F
0.05 ± 0.05
Page 2 of 6
ASC_ AMDIP1606L96B8Q1C _V01
Aug. 2018
Approval sheet
ELECTRICAL CHARACTERISTICS
AMDIP1606L96B8Q1C
Specification
4900~5100 MHz
Frequency range
2400~2500 MHz
5150~5950 MHz
1.3 dB max. (1.0 dB typ.) at 25 °C
1.5 dB max. at -40 ~ +105 °C
1.0 dB max. (0.8 dB typ.) at 25°C
1.2 dB max. at -40 ~+105 °C
0.7 dB max. (0.55 typ.) at 25 °C
0.9 dB max. at -40 ~ +105 °C
Insertion loss
50 dB min. (54 dB typ.)
@ 4800~5000 MHz
15 dB min. (25 dB typ.)
@ 7200~7500MHz
40 dB min. (45 dB typ.) @ 2400~2500 MHz
25 dB min. (30 dB typ.) @ 10300~11700 MHz
15 dB min. (20 dB typ.) @ 15300~16200 MHz
Attenuation
Return loss
Isolation
10 dB min.
40 dB min. (45 dB typ.) @ 2400~2500 MHz
45 dB min. (48 dB typ.) @ 4800~5000 MHz
45 dB min. (48 dB typ.) @ 5000~6000 MHz
Impedance
50 Ω
Moisture sensitivity levels
LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)
Operating & Storage Condition (Component)
Operation Temperature Range: -40 ~ +105 ℃
Storage Temperature Range: -40 ~ +105 ℃
Storage Condition before Soldering (Included packaging marerial)
Storage Temperature Range: +5 ~ +40 ℃
Humidity: 30 to 70% relative humidity
TYPICAL ELECTRICAL PERFORMANCE
LAND PATTERN
Figure
Unit : mm
Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 3 of 6
ASC_ AMDIP1606L96B8Q1C _V01
Aug. 2018
Approval sheet
RELIABILITY TEST
TEST
PROCEDURE / TEST METHOD
REQUIREMENT
Resistance to soldering heat
(R.S.H)
MIL-STD-202
Un-mounted chips completely immersed No mechanical damage.
for 10±1second in a SAC solder bath at
270℃±5ºC
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
method 210
Loss of metallization on the edges of each
electrode shall not exceed 25
Solderability
J-STD-002
* Condition A
All terminations shall exhibit a continuous
solder coating free from
defects from a minimum of 95% of the critical
surface area of any individual termination.
Un-mounted chips 4hrs / 155C*dry then
completely immersed for 50.5 sec in
solder bath at 2355C.
* Condition B
Un-mounted chips steam 8 hrs then
completely immersed for 101 sec. in
solder bath at 260+0/-5C.
1000 cycles, -55℃ ~ +125℃, dwell time
30min
Temperature cycling
JESD22
method JA-104
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Humidity
MIL-STD-202
method 103
No mechanical damage.
1000+48/-0 hours; 85C, 85% RH
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
High Temperature Exposure
MIL-STD-202
method 108
1000+48/-0 hours; without load in a
No mechanical damage.
temperature chamber controlled 125±3°C Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Mechanical Shock
MIL-STD-202
method 213
1/2 Sine Pulse / 100g Peak / Velocity
12.3ft/sec
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Board Flex
RF component mounted on a 90mm glass No mechanical damage.
epoxy resin PCB(FR4), bending once
2mm for 60sec
Electrical specification shall satisfy the
AEC-Q200-005
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Terminal strength
AEC-Q200-006
Pressurizing force: 1.8Kg,
Test time: 60±1sec.
No remarkable damage or removal of the
terminations
Only 0402 for 1.0kg/60sec.
LGA terminal series for 0.5kg/60sec.
Vibration
MIL-STD-202
method 204
Test 5g’s for 20min., 12 cycles each of 3 No mechanical damage.
orientations Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
ESD
AEC-Q200-002
Test contact 1.0KV ( 0.5KV for 1005 only) No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Page 4 of 6
ASC_ AMDIP1606L96B8Q1C _V01
Aug. 2018
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,
Fig 2. Infrared soldering profile
ORDERING CODE
AM
Walsin
DIP
Product Code
DIP:
1606
Dimension code
L
96B8Q1C
Specification
Design Code
Application
L: 2.4GHz/5Ghz
Automotive
device
Per 2 digits of Length, Thickness
e.g. : 1606 =
Diplexer
Length 1.6mm,
Thickness 0.6mm
Minimum Ordering Quantity: 4000 pcs per reel.
PACKAGING
Paper Tape specifications (unit :mm)
Index
Ao
0.975 0.10
E
Bo
T
W
D
1.76 0.10
F
1.55 0.05
Po
0.75 0.10
P1
8.00 0.10
P2
Dimension (mm)
Index
1.75 0.10
3.50 0.05
4.00 0.10
4.00 0.10
2.00 0.05
Dimension (mm)
Page 5 of 6
ASC_ AMDIP1606L96B8Q1C _V01
Aug. 2018
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Φ178.0
Φ60.0
Φ13.0
Dimension (mm)
Taping Quantity: 4000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Medical equipment
(5) Disaster prevention / crime prevention equipment
(6) Traffic signal equipment
(7) Transportation equipment (vehicles, trains, ships, etc.)
(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products should be used in 6 months from the day of WALSIN outgoing inspection.
(2) Storage environment condition.
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: +5 to +40℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 6 of 6
ASC_ AMDIP1606L96B8Q1C _V01
Aug. 2018
相关型号:
©2020 ICPDF网 联系我们和版权申明