ICP-080-7 [YAMAICHI]
IC Socket, QFP80, 80 Contact(s);
| 型号： | ICP-080-7 |
| 厂家： | 
YAMAICHI ELECTRONICS CO., LTD. |
| 描述： | IC Socket, QFP80, 80 Contact(s) |
| 文件： | 总5页 (文件大小：104K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IC149 / ICP Series
Emulation-Adapter (80 pins)
Adapter Part Num ber
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
500MΩ at 150V DC
ICP-080-3
700V AC for 1 m inute
30m Ω m ax. at 10m A and 20m V
Operating Tem p. Range: -25°C to +85°C
Com patible Socket (Part No.)
Reflow-soldering Tem p.: 220°C for 60 seconds
Mating Cycles:
20 insertions m axim um
IC149-80-012-*5 (w/o pos. pins)
IC149-80-112-*5 (with pos. pins)
Allowable Torque (m ax.): - for 1-tim e screw connection
= m ax 0.147 Nm
- for repetitive screw connection = m in 0.078 Nm
m ax 0.098 Nm
Materials and Finish
Housing: PTES, glass filled UL94V-0
Contact: Phosphor Bronze
Plating: Au 0.3µm m in. over 2.5 ~ 4.5µm Ni
Outline Adapter Dim ensions (Reference Only)
2.4
36.62
Rem arks
1. Ensure a clean contact area. Fluxes, dust and other im purifications
m ay cause corrosion and contact problem s.
2. Careful attention m ust be taken when fixing the Adapter,
since it is m ade from therm oplastic m aterial.
By exceeding the m axim um torque a perfect perform ance can
no longer be guaranteed.
21.90
32.42
Adapter PCB-Layout (IC149-80-*12-B5 )
Top View from Soldering Side
ote: No conduits within this hatched area.
SPECIFICATIONS ARE SUBJ ECT TO ALTERATION WITHOUT PRIOR NOTICE
– DIMENS IONS IN MILLIMETER
IC149 / ICP Series
Emulation-Adapter (80 pins)
Adapter Part Num ber
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
500MΩ at 150V DC
ICP-080-4
700V AC for 1 m inute
30m Ω m ax. at 10m A and 20m V
Operating Tem p. Range: -25°C to +85°C
Com patible Socket (Part No.)
Reflow-soldering Tem p.: 220°C for 60 seconds
Mating Cycles:
20 insertions m axim um
IC149-80-017-*5 (w/o pos. pins)
IC149-80-117-*5 (with pos. pins)
Allowable Torque (m ax.): - for 1-tim e screw connection
= m ax 0.147 Nm
- for repetitive screw connection = m in 0.078 Nm
m ax 0.098 Nm
Materials and Finish
Housing: PTES, glass filled UL94V-0
Contact: Phosphor Bronze
Plating: Au 0.3µm m in. over 2.5 ~ 4.5µm Ni
Outline Adapter Dim ensions (Reference Only)
2.4
29.32
Rem arks
1. Ensure a clean contact area. Fluxes, dust and other im purifications
m ay cause corrosion and contact problem s.
2. Careful attention m ust be taken when fixing the Adapter,
since it is m ade from therm oplastic m aterial.
By exceeding the m axim um torque a perfect perform ance can
no longer be guaranteed.
15.00
25.53
Adapter PCB-Layout (IC149-80-*17-B5)
Top View from Soldering Side
Note: No conduits within this hatched area.
SPECIFICATIONS ARE SUBJ ECT TO ALTERATION WITHOUT PRIOR NOTICE
– DIMENS IONS IN MILLIMETER
IC149 / ICP Series
Emulation-Adapter (80 pins)
Adapter Part Num ber
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
500MΩ at 150V DC
ICP-080-5
700V AC for 1 m inute
30m Ω m ax. at 10m A and 20m V
Operating Tem p. Range: -25°C to +85°C
Com patible Socket (Part No.)
Reflow-soldering Tem p.: 220°C for 60 seconds
Mating Cycles:
20 insertions m axim um
IC149-80-021-*5 (w/o pos. pins)
IC149-80-121-*5 (with pos. pins)
Allowable Torque (m ax.): - for 1-tim e screw connection
= m ax 0.147 Nm
- for repetitive screw connection = m in 0.078 Nm
m ax 0.098 Nm
Materials and Finish
Housing: PTES, glass filled UL94V-0
Contact: Phosphor Bronze
Plating: Au 0.3µm m in. over 2.5 ~ 4.5µm Ni
Outline Adapter Dim ensions (Reference Only)
2.4
36.62
Rem arks
1. Ensure a clean contact area. Fluxes, dust and other im purifications
m ay cause corrosion and contact problem s.
2. Careful attention m ust be taken when fixing the Adapter,
since it is m ade from therm oplastic m aterial.
By exceeding the m axim um torque a perfect perform ance can
no longer be guaranteed.
21.90
32.42
Adapter PCB-Layout (IC149-80-*21-B5)
Top View from Soldering Side
Note: No conduits within this hatched area.
SPECIFICATIONS ARE SUBJ ECT TO ALTERATION WITHOUT PRIOR NOTICE
– DIMENS IONS IN MILLIMETER
IC149 / ICP Series
Emulation-Adapter (80 pins)
Adapter Part Num ber
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
500MΩ at 150V DC
ICP-080-6
700V AC for 1 m inute
30m Ω m ax. at 10m A and 20m V
Operating Tem p. Range: -25°C to +85°C
Com patible Socket (Part No.)
Reflow-soldering Tem p.: 220°C for 60 seconds
Mating Cycles:
20 insertions m axim um
IC149-80-031-*5 (w/o pos. pins)
IC149-80-131-*5 (with pos. pins)
Allowable Torque (m ax.): - for 1-tim e screw connection
= m ax 0.147 Nm
- for repetitive screw connection = m in 0.078 Nm
m ax 0.098 Nm
IC149-80-030-*5 (w/o pos. pins)
IC149-80-130-*5 (with pos. pins)
Materials and Finish
Housing: PTES, glass filled UL94V-0
Contact: Phosphor Bronze
Plating: Au 0.3µm m in. over 2.5 ~ 4.5µm Ni
Outline Adapter Dim ensions (Reference Only)
2.4
27.00
Rem arks
1. Ensure a clean contact area. Fluxes, dust and other im purifications
m ay cause corrosion and contact problem s.
2. Careful attention m ust be taken when fixing the Adapter,
since it is m ade from therm oplastic m aterial.
By exceeding the m axim um torque a perfect perform ance can
no longer be guaranteed.
14.50
Adapter PCB-Layout (IC149-80-*31-B5 and IC149-80-*30-B5)
Top View from Soldering Side
Note: No conduits within this hatched area.
SPECIFICATIONS ARE SUBJ ECT TO ALTERATION WITHOUT PRIOR NOTICE
– DIMENS IONS IN MILLIMETER
IC149 / ICP Series
Emulation-Adapter (80 pins)
Adapter Part Num ber
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
500MΩ at 150V DC
ICP-080-7
700V AC for 1 m inute
30m Ω m ax. at 10m A and 20m V
Operating Tem p. Range: -25°C to +85°C
Com patible Socket (Part No.)
Reflow-soldering Tem p.: 220°C for 60 seconds
Mating Cycles:
20 insertions m axim um
IC149-80-051-*5 (w/o pos. pins)
IC149-80-151-*5 (with pos. pins)
Allowable Torque (m ax.): - for 1-tim e screw connection
= m ax 0.147 Nm
- for repetitive screw connection = m in 0.078 Nm
m ax 0.098 Nm
Materials and Finish
Housing: PTES, glass filled UL94V-0
Contact: Phosphor Bronze
Plating: Au 0.3µm m in. over 2.5 ~ 4.5µm Ni
Outline Adapter Dim ensions (Reference Only)
2.4
28.00
Rem arks
1. Ensure a clean contact area. Fluxes, dust and other im purifications
m ay cause corrosion and contact problem s.
2. Careful attention m ust be taken when fixing the Adapter,
since it is m ade from therm oplastic m aterial.
By exceeding the m axim um torque a perfect perform ance can
no longer be guaranteed.
16.50
Adapter PCB-Layout (IC149-80-*51-B5)
Top View from Soldering Side
hin this hatched area.
SPECIFICATIONS ARE SUBJ ECT TO ALTERATION WITHOUT PRIOR NOTICE
– DIMENS IONS IN MILLIMETER
相关型号：
©2020 ICPDF网 联系我们和版权申明