Z16FMC28AG20EG [ZILOG]

IC 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64, LEAD FREE, LQFP-64, Microcontroller;


型号：	Z16FMC28AG20EG
厂家：	ZILOG, INC.
描述：	IC 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64, LEAD FREE, LQFP-64, Microcontroller 时钟微控制器外围集成电路
文件：	总8页 (文件大小：276K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PB022901‐1110

Zilog’s Z16FMC Series Flash Microcontroller

A 16‐bit Single‐Cycle CISC MCU Solution

Overview

Zilog’s Z16FMC Series MCU, a part of the Flash Motor Control family of devices, is a powerful 16‐bit CISC

microcontroller that outperforms most RISC microcontrollers in its class. The Z16FMC boasts a unique

architecture that provides the power, punch and performance of a 32‐bit micro with the code, current

efficiency and cost of a 16‐bit. The Z16FMC features Zilog’s ZNEO^®CPU, which boasts a highly‐optimized

instruction set that achieves higher performance per clock cycle with less code space and lower overhead

than competing architectures. Optimized for motor control applications, these devices are designed for the

control of multiphase AC and DC variable‐speed motors. Target applications are large appliances, HVAC

and industrial.

Z16FMC SERIES FLASH

MICROCONTROLLER

ADVANTAGES

 EFFICIENT MOTOR CONTROL

 OUT-OF-BOX SOLUTION

 COST SAVINGS

This powerful yet simple core with sixteen 32‐bit general‐purpose registers supports complex CISC

addressing modes and a single‐cycle instruction set that includes frame pointer support, multi‐bit shift and

multi‐register push/pop as well as powerful 32‐bit math operations.

 EXPANDABLE SYSTEM

The Z16FMC Series features a flexible multi‐channel pulse width modulator (PWM) timer module with

three complementary pairs or six independent PWM outputs supporting dead‐band operation and fault

protection trip input. These features provide multiphase control capability for a variety of motor types and

ensure safe operation of the motor by providing Pulse‐by‐Pulse or latched fast shutdown of the PWM pins

during fault condition.

The Z16FMC Series also features up to twelve single‐ended channels of 10‐bit analog‐to‐digital conversion

with a sample and hold circuit plus one operational amplifier for current sampling and one comparator for

over‐current limiting or shutdown.

A high‐speed analog‐to‐digital converter (ADC) enables voltage, current and back‐EMF sensing, while dual‐

edge interrupts and a 16‐bit timer provide a Hall‐effect sensor interface.

Two full‐duplex 9‐bit UARTs provide serial asynchronous communication and support the local

interconnect network (LIN) serial communications protocol. The LIN bus is a cost‐efficient Single Master,

Multiple Slave organization that supports speeds up to 20 Kbps.

Z16FMC Series Flash Microcontroller Key Features



16‐bit optimized Single‐Cycle CISC core

Up to 128 KB of in‐circuit programmable Flash memory

Highly integrated Digital/Analog peripherals

•

Operational Amplifier

Analog Comparator

Internal Precision Oscillator

4‐Channel DMA Controller

12‐bit PWM module with three complementary pairs or six independent PWM outputs



Flexible communication interface including a 9‐bit UART with LIN & IrDA, I2C, ESPI

12‐Channel, 10‐bit ADC with a 2.1μs conversion time

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Z16FMC Series Block Diagram

Z16FMC Core Features

WIDE RANGE OF

APPLICATION MODELS



Any register‐to‐any register architecture

20 MIPS throughput at 20 MHz

8‐, 16‐, and 32‐bit ALU operations

16‐bit bus widths

 LARGE APPLIANCES

 HVAC

 INDUSTRIAL

 POWER TOOLS

 AUTOMOTIVE

ADDITIONAL INFORMATION

Built‐in 32 x 32 multiply operations

(signed and unsigned)

 WWW.ZILOG.COM

Documentation

Additional Products



Built‐in 64 by 32 divide (unsigned)

Compiler friendly instruction set

Z16FMC Flash Controller Detailed Feature Set

ZNEO^®CPU Core

Zilog’s Z16FMC utilizes a ZNEO CPU which offers the highest level of performance and features in the FMC

product family and provides support for more complex motor control applications. The ZNEO CPU features

are as follows:

 Pipelined architecture: Fetch, Decode, and Execute

 16 MB of Program memory address space for object code and data with 8‐ or 16‐bit data paths

 8‐, 16‐, and 32‐bit ALU operations

 24‐bit stack with overflow protection

 Direct any register‐to‐any register architecture allows each memory address to function as an

accumulator. This improves execution time and decreases the required program memory

 New instructions improve execution efficiency for code developed using higher‐level programming

languages including ‘C’

On‐Chip Flash Memory

The products in the Z16FMC Series feature up to 128 KB of non‐volatile Flash memory with

read/write/erase capability. The Flash memory is programmed and erased in‐circuit by either user code or

through the On‐Chip Debugger (OCD). The Flash memory array is arranged in 2 KB pages. The 2 KB page is

the minimum Flash block size that is erased. The Flash memory is also divided into eight sectors, which is

protected from programming and erase operations on a per sector basis.

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Analog Peripherals

The Z16FMC Series devices include a 12‐channel ADC. The ADC converts an analog input signal to a 10‐bit

binary number. The features of the successive approximation ADC include:



12 analog input sources multiplexed with GPIO ports.

2.5 μs conversion time

Automatic Time‐Tag of results

• Programmable timing controls

The Z16FMC devices feature a general‐purpose comparator and an operational amplifier.



Moderate speed comparator (200 ns propagation delay) with a maximum input offset of 5 mV

Two‐input, one‐output operational amplifier with a typical open loop gain of 10,000 (80 dB)

Communication Peripherals

The Z16FMC devices feature a rich array of communication peripherals, including:



UART

•

LIN Master/Slave

IrDA Encoder/Decoder

Multiprocessor 9‐bit Mode



Enhanced SPI (ESPI)

I2C Master/Slave

Flexible Timers

The Z16FMC Series contains three 16‐bit reloadable timers used for timing, event counting, or generation

of Pulse Width Modulator (PWM) signals. The timers include the following features:



3‐Phase, 12‐bit PWM with 6 outputs

3, 16‐bit timers with 8 Modes

Watchdog timer with RC Oscillator

4‐Channel DMA Controller

The four DMA channels are used to transfer data from memory to memory, memory to peripherals,

peripherals to memory, or peripherals to peripherals. The features of DMA controller include:



Four independent DMA channels

Direct and Linked List Modes

Round‐Robin Channel Priority

Byte, word, or quad operation, up to 64K transfers (64 KByte, 64 KWord or 64 KQuad)

Flexible Interrupt Control

The Z16FMC Series includes offers interrupt control flexibility including:



8 External Rising or Falling Edge

4 External Dual Edge

Vectored or Polled Interrupts

24 Interrupts with 3 Programmable Priority Levels

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Internal Precision Oscillator

The Z16FMC incorporates a fully integrated Internal Precision Oscillator (IPO) that eliminates the need for

external components. With nominal untrimmed accuracy of ±30%., and the ability to manually trim the

oscillator to achieve a ±4% frequency accuracy over the operating temperature and supply voltage range of

the device, the Z16FMC provides a best‐in‐class IPO feature set, including:



On‐chip RC oscillator which does not require external components

Nominal ±30% accuracy without trim or manually trim the oscillator to achieve a ± 4%

Typical output frequency of 5.5296 MHz or 32 kHz

Trimming possible through Flash option bits with user override

Eliminates crystals/ceramic resonators in applications where high timing accuracy is not required

Single‐Pin On‐Chip Debug

All of Zilog’s embedded Flash devices offer a uniquely integrated On‐Chip Debugger (OCD) that provides

the following advanced features:



Only 1 pin, frees up other pins

Unlimited Software Breakpoints

4 Hardware Breakpoints

In‐Circuit Flash Programming

Instruction Execution Trace

Z16FMC Development Tool Support

The Z16FMC devices are backed by a comprehensive development tools package that includes all the

necessary design essentials to get your Motor Control application up and running.



Z16FMC Series Development Board

USB Opto‐Isolated Smart Cable for PC to Z16FMC Series

5 V DC power supply

3 Phase Motor Control Application Board

The Z16FMC Series is also supported by ZDS II—Zilog’s Integrated Development Environment (IDE) with

ANSI C‐Compiler (available on www.zilog.com). The ZDS II IDE includes:



Sample Code

Product Specifications (Data Sheets)

Product Briefs

ZNEO® CPU User Manual

Hardware Tools & Part Number Ordering Information



Z16FMC Series Motor Control Development Kit (part #: Z16FMC28200KITG)

Opto‐Isolated USB Smart Cable Accessory Kit (part #: ZUSBOPTSC01ZACG)

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Z16FMC Design Architecture

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Ordering Information

Order the Z16FMC Series of Flash Microcontrollers from your local Zilog sales representative

using the following guide.

Part Number

Flash (KB) SRAM (KB) GPIO Package

Temperature

0°C to 70°C

Z16FMC28AG20SG 128

Z16FMC28AG20EG 128

Z16FMC64AG20SG 64

Z16FMC64AG20EG 64

Z16FMC32AG20SG 32

Z16FMC32AG20EG 32

64‐pin LQFP

–40°C to 105°C

0°C to 70°C

–40°C to 105°C

0°C to 70°C

–40°C to 105°C

For more information about products, system evaluation calculation tools, and product

collateral, please visit us at www.zilog.com, where you can also find sales office locations and

the most current product information on our website. Or, consult your local Zilog

representative.

Documentation

For a complete listing of all available application notes, data sheets, user manuals, and sample

libraries, please visit us at www.zilog.com.

Document Number

Description

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PS0287

QS0079

UM0234

CS0009

AN0311

Z16FMC Series Motor Control MCUs Product Specification

Z16FMC Series Motor Control Development Kit Quick Start Guide

Z16FMC Series Motor Control Development Kit User Manual

AC Induction and Brushless DC Motor Control Cut Sheet

Sensorless Brushless DC Motor Control with the Z16FMC MCU

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Engineering Notes:

Z16FMC Series of Flash Microcontrollers

Motor Control Solutions

Warning: DO NOT USE IN LIFE SUPPORT

LIFE SUPPORT POLICY

ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS

WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG

CORPORATION.

As used herein

Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or

sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component

in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life

support device or system or to affect its safety or effectiveness.

Document Disclaimer

described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR

OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS

DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY

MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information

contained within this document has been verified according to the general principles of electrical and mechanical

engineering.

ZAURA is a trademark of Zilog, Inc. All other product or service names are the property of their respective owners.

WWW.ZILOG.COM | 408‐513‐1500

Zilog and the Zilog logo are registered trademarks of

Zilog, Inc. in the United States and in other countries.

Z16FMC28AG20EG [ZILOG]

相关型号：

Z16FMC28AG20SG

Z16FMC32AG20EG

Z16FMC32AG20SG

Z16FMC64AG20SG

Z16LT26A

Z16LT52A

Z16LT52R

Z16M17

Z16M1720ASC

Z16M1720ASC1868

Z16M1720ASC1868

Z170