ABBTM-NVC-MDCS42A
更新时间：2025-01-16 19:13:53
品牌：ABRACON
描述：Telecom Circuit, 1-Func, ROHS COMPLIANT, SMT-32
概述
规格参数
数据手册ABBTM-NVC-MDCS42A 概述
Telecom Circuit, 1-Func, ROHS COMPLIANT, SMT-32 其他电信集成电路
ABBTM-NVC-MDCS42A 规格参数
| 是否无铅： | 不含铅 | 是否Rohs认证： | 符合 |
| 生命周期： | Obsolete | 包装说明： | , |
| Reach Compliance Code： | compliant | HTS代码： | 8542.39.00.01 |
| 风险等级： | 8.58 | JESD-30 代码： | R-XXMA-N32 |
| 长度： | 25.8 mm | 湿度敏感等级： | 3 |
| 功能数量： | 1 | 端子数量： | 32 |
| 最高工作温度： | 85 °C | 最低工作温度： | -40 °C |
| 封装主体材料： | UNSPECIFIED | 封装形状： | RECTANGULAR |
| 封装形式： | MICROELECTRONIC ASSEMBLY | 峰值回流温度（摄氏度）： | 265 |
| 座面最大高度： | 2.2 mm | 标称供电电压： | 3.3 V |
| 表面贴装： | YES | 电信集成电路类型： | TELECOM CIRCUIT |
| 温度等级： | INDUSTRIAL | 端子形式： | NO LEAD |
| 端子节距： | 1.2 mm | 端子位置： | UNSPECIFIED |
| 处于峰值回流温度下的最长时间： | 10 | 宽度： | 13.4 mm |
| Base Number Matches： | 1 |
ABBTM-NVC-MDCS42A 数据手册
通过下载ABBTM-NVC-MDCS42A数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
Moisture Sensitivity Level (MSL) – Level 3
Note: MSL3 packaging applies to MOQ of (50) units. Devices sold in less than MOQ quantities will be provided in an ESD bag with Desiccant.
FEATURES:
• Bluetooth V2.1+EDR (class2)
APPLICATIONS:
• Cable replacement
• TX power +4dbm, / -84dBm RX sensitivity
• Onboard Meander line PCB antenna support 10 meters
• Support sniff and deep sleep mode
• Supports master and slave
• Bar code and RFID scanners
• Measurement and monitoring systems
• Industrial sensors and controls
• Medical devices
• Supports Bluetooth profiles SPP, HID, DUN, OPP, iAP ver Bluetooth
• UART and USB programming and data interfaces
• I2C Master interface
• Industrial PCs and laptops
• Support Apple iAP protocol
• PCM digital audio interfaces
• 8MBit onboard flash
• 25.80x13.40x2.2mm
• BQB/FCC/CE Certified*
*Note: ABBTM-NVC-MDCS42A crosses to NovaComm P/N: NVC-MDCS42A. BQB/FCC/CE certification documentation is
under P/N: NVC-MDCS42A.
GENERAL DESCRIPTION
ABBTM-NVC-MDCS42A is a class 2 Bluetooth® 2.1+EDR (Enhanced Data Rates) module, based on NovaComm’s proprietary technology.
It is a highly integrated and sophisticated module which contains all the necessary elements from radio to antenna and a fully implemented
protocol stack. It is an ideal solution for integrating Bluetooth® into various products with limited knowledge of Bluetooth® and RF
technologies.
With NovaComm’s iNova® bluetooth stack firmware, designers can easily customize their applications to support different Bluetooth
profiles, such as SPP, HID, DUN, OPP.
This module can also interface with Apple’s Authentication Coprocessor and build an iAP over Bluetooth application.
PIN CONFIGURATION:
Figure 1. Pinout (Topview)
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN DESCRIPTION
Pin
1
Symbol
AIO1
I/O Type
Bi-directional
Description
Programmable input/output line
Ground
2
Ground
GND
3
CMOS input, with weak internal pull-down
Serial Peripheral Interface data input
SPI_MOSI
Bi-directional with programmable strength internal
pull-up/down
Bi-directional with programmable strength internal
pull-up/down
4
5
6
PIO6
PIO7
Programmable input/output line
Programmable input/output line
Reset if low. Input denounced so
must be low for >5ms to cause a reset
RESETB
CMOS input with weak internal pull-up
7
8
SPI_CLK
PCM_CLK
PCM_SYNC
PCM_IN
PCM_OUT
VDD_3V3
GND
input with weak internal pull-down
Bi-directional with weak internal pull-down
Bi-directional with weak internal pull-down
CMOS Input, with weak internal pull-down
CMOS output, tri-state, with weak internal pull-down
3V3 power input
Serial Peripheral Interface clock
Synchronous Data Clock
Synchronous Data Sync
Synchronous Data Input
Synchronous Data Output
3V3 power input
9
10
11
12
13
14
Ground
Ground
Ground
Ground
GND
Bi-directional with programmable strength internal
pull-up/down
15
16
17
18
PIO11
PIO10
PIO9
Programmable input/output line
Programmable input/output line
Programmable input/output line
Programmable input/output line
Bi-directional with programmable strength internal
pull-up/down
Bi-directional with programmable strength internal
pull-up/down
Bi-directional with programmable strength internal
pull-up/down
PIO8
19
20
21
22
23
Ground
Ground
GND
UART_RX
CMOS input with weak internal pull-down
CMOS output, tristate, with weak internal pull-up
CMOS output, tri-state, with weak internal pull-up
CMOS input with weak internal pull-down
UART data input
UART data output
UART_TX
UART_RTS
UART_CTS
UART request to send active low
UART clear to send active low
USB data plus with selectable
internal 1.5K pull-up resistor
24
25
26
USB_D+
USB_D-
PIO2
Bi-directional
Bi-directional
USB data minus
Bi-directional with programmable strength internal
pull-up/down
Programmable input/output line
Bi-directional with programmable strength internal
pull-up/down
27
28
29
30
PIO3
PIO5
Programmable input/output line
Programmable input/output line
Programmable input/output line
Bi-directional with programmable strength internal
pull-up/down
Bi-directional with programmable strength internal
pull-up/down
PIO4
Chip select for Synchronous Serial
Interface active low
SPI_CSB
CMOS input with weak internal pull-up
Serial Peripheral Interface data
output
31
32
SPI_MISO
AIO0
CMOS output, tri-state, with weak internal pull-down
Bi-directional
Programmable input/output line
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
ELECTRICAL CHARACTERISTICS
Absolute Maximum Rating
Rating
Min
-40
Max
Unit
°C
V
Storage Temperature
PIO/AIO Voltage
+120
+3.7
+3.7
-0.4
-0.4
-0.4
VDD Voltage
V
Other Terminal Voltages except RF
VDD+0.4
V
Recommended Operating Conditions
Operating Condition
Min
Typ
Max
Unit
Operating Temperature Range
VDD Voltage
-40
--
+85
°C
V
+2.7
+3.3
+3.7
Power Consumptions
Operating Condition
Radio On*(Discovery)
Radio On*( Inquiry window time)
Min
Typ
23
35
3
Max
Unit
mA
mA
mA
mA
Connected (Deep sleep disable, sniff enable )
Connected (Deep sleep enable, sniff enable)
Connected with data transfer
1.4
0.04
3
11
11
15
2.4
10
mA
* Note :
Power consumption depends on the firmware used. Typical values are shown in the table.
Sniff mode ----- In Sniff mode, the duty cycle of the slave’s activity in the piconet may be reduced. If a slave is in active mode
on an ACL logical transport, it shall listen in every ACL slot to the master traffic, unless that link is being treated as a scatter
net link or is absent due to hold mode. With sniff mode, the time slots when a slave is listening are reduced, so the master shall
only transmit to a slave in specified time slots. The sniff anchor points are spaced regularly with an interval of Tsniff.
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
INPUT/OUTPUT TERMINAL CHARACTERISTICS
Digital Terminals
Supply Voltage Levels
Input Voltage Levels
VIL input logic level low
Min
Typ
Max
Unit
-0.4
+0.8
V
V
VIH input logic level high
Output Voltage Levels
VOL output logic level low, IOL = 4.0mA
VOH output logic level high, IOH = -4.0mA
Input and Tri-state Current
Strong pull-up
0.7VDD
VDD+0.4
0.2
V
V
VDD-0.2
-100
10
-40
-10
100
-0.2
5.0
+1
μA
μA
μA
μA
μA
pF
Strong pull-down
40
-1.0
+1.0
0
Weak pull-up
-5
Weak pull-down
0.2
-1
I/O pad leakage current
CI Input Capacitance
1.0
5.0
USB
USB Terminals
Min
Typ
Max
Unit
Input Threshold
VIL input logic level low
VIH input logic level high
Input Leakage Current
GND < VIN < VDD(a)
CI Input capacitance
0.3VDD
V
V
0.7VDD
-1
1
5
μA
2.5
10.0
pF
Output Voltage Levels to Correctly Terminated USB Cable
VOL output logic level low
0.0
2.8
0.2
V
V
VOH output logic level high
(a)Internal USB pull-up disable
VDD
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
PHYSICAL INTERFACES
Power Supply
The module accepts a 3.3V DC power input.
Reset
The module may be reset from several sources: RESETB pin, power-on reset, a UART break character or via software
configured watchdog timer.
The RESETB pin is an active low reset and is internally filtered using the internal low frequency clock oscillator. A reset
will be performed between 1.5 and 4.0ms following RESETB being active. It is recommended that RESETB be applied
for a period greater than 5ms.
Pin Name / Group
PIOs
Pin Status on Reset
Input with weak pull-down
Output, driving low
AIOs
PCM_OUT
PCM_IN
Tri-stated with weak pull-down
Input with weak pull-down
Input with weak pull-down
PD
PCM_SYNC
PCM_CLK
UART_TX
UART_RX
UART_RTS
UART_CTS
USB_DP
Output tri-stated with weak pull-up
Input with weak pull-down
Output tri-stated with weak pull-up
Input with weak pull-down
Input with weak pull-down
Input with weak pull-down
Input with weak pull-up
Input with weak pull-down
Input with weak pull-down
Tri-stated with weak pull-down
Input with weak pull-up
USB_DN
SPI_CSB
SPI_CLK
SPI_MOSI
SPI_MISO
RESETB
Internal Antenna
The module integrates a Meander line PCB chip antenna. There’s no need to use antenna on customer’s PCB. Please take
precaution to leave ample clearance for the antenna (See Figure 17)
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
PIO
ABBTM-NVC-MDCS42A has a total of 10 digital programmable I/O terminals. They are powered from VDD (3.3V).
Their functions depend on firmware running on the device. PIO lines can be configured through software to have either
weak or strong pull-ups or pull-downs.
Note:
All PIO lines are configured as inputs with weak pull-downs at reset.
Any of the PIO lines can be configured as interrupt request lines or as wake-up lines from sleep modes.
AIO
ABBTM-NVC-MDCS42A has 2 analogue I/O terminals. Their functions depend on software. Typically ADC functions
can be configured to battery voltage measurement. They can also be used as a digital PIO.
UART
This module has a standard UART interface which provides a simple mechanism for communicating with other serial
devices using the RS232 protocol.
The UART CTS and RTS signals can be used to implement RS232 hardware flow control where both are active low
indicators.
Possible UART Settings
Parameter
Possible Values
1200 baud (≤2%Error)
9600 baud (≤1%Error)
3M baud (≤1%Error)
RTS/CTS or None
None, Odd or Even
1 or 2
Minimum
Maximum
Baud Rate
Flow Control
Parity
Number of Stop Bits
Bits per Byte
8
I2C Master
PIO6, PIO7 and PIO8 can be used to form a master I2C interface. The interface is formed using software to drive these
lines. It is suited only to relatively slow functions such as driving a LCD, keyboard scanner or EEPROM. In the case,
PIO lines need to be pulled up through 2.2KΩ resistors.
Figure 2. Example EEPROM Connection with I2C Interface
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
SPI Interface
The synchronous serial port interface (SPI) is used for flash/debug the module only. It cannot be used for any user
functionality. Please always design test points for this interface on the PCB in case there is need to re-flash the module or
flash-in-field in manufacture.
PCM Interface
PCM is a standard method used to digitize audio (particularly voice) for transmission over digital communication
channels. Through its PCM interface, the module has hardware support for continual transmission and reception of PCM
data, thus reducing processor overhead for applications. The module offers a bi-directional digital audio interface that
routes directly into the baseband layer of the on-chip firmware. It does not pass through the HCI protocol layer.
Hardware on the module allows the data to be sent to and received from a SCO connection. Up to three SCO connections
can be supported by the PCM interface at any one time.
The module can operate as the PCM interface master generating an output clock of 128, 256 or 512kHz. When
configured as PCM interface slave, it can operate with an input clock up to 2048kHz. The module is compatible with a
variety of clock formats, including Long Frame Sync, Short Frame Sync and GCI timing environments.
It supports 13-bit or 16-bit linear, 8-bit µ-law or A-law companied sample formats at 8k samples/s and can receive and
transmit on any selection of three of the first four slots following PCM_SYNC.
The module interfaces directly to PCM audio devices including the following:
•
•
•
•
•
•
Qualcomm MSM 3000 series and MSM 5000 series CDMA baseband devices
OKI MSM7705 four channels A-law and µ-law CODEC
Motorola MC145481 8-bit A-law and µ-law CODEC
Motorola MC145483 13-bit linear CODEC
STW 5093 and 5094 14-bit linear CODECs
The module is also compatible with the Motorola SSI™ interface.
PCM Interface Master /Slave
When PCM is configured as the slave,
the module accepts PCM_CLK rates up to 2048kHz.
When PCM is configured as a master, the module
generates PCM_CLK and PCM_SYNC.
Figure 3. Configured PCM as a Master
Figure 4. Configured PCM as a Slave
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
Long Frame Sync
Long Frame Sync is the name given to a clocking format that controls the transfer of PCM data words or samples. In
Long Frame Sync, the rising edge of PCM_SYNC indicates the start of the PCM word. When the module is configured
as PCM master, generating PCM_SYNC and PCM_CLK, then PCM_SYNC is 8-bits long. When the module is
configured as PCM Slave, PCM_SYNC may be from two consecutive falling edges of PCM_CLK to half the
PCM_SYNC rate, i.e., 62.5µs long.
Figure 5. Long Frame Sync (shown with 8-bit Companded Sample)
Short Frame Sync
In Short Frame Sync, the falling edge of PCM_SYNC indicates the start of the PCM word. PCM_SYNC is always one
clock cycle long.
Figure 6. Short Frame Sync (shown with 16-bit Sample)
As with Long Frame Sync, the module samples PCM_IN on the falling edge of PCM_CLK and transmits PCM_OUT on
the rising edge. PCM_OUT may be configured to be high impedance on the falling edge of PCM_CLK in the LSB
position or on the rising edge.
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
Multi-slot Operation
More than one SCO connection over the PCM interface is supported using multiple slots. Up to three SCO connections
can be carried over any of the first four slots.
Figure 7. Multi-Slot Operation with Two Slots and 8-bit Companded Samples
GCI Interface
The module is compatible with the General Circuit Interface (GCI), a standard synchronous 2B+D ISDN timing
interface. The two 64Kbps B channels can be accessed when this mode is configured.
Figure 8. GCI Interface
The start of a frame is indicated by the rising edge of PCM_SYNC and runs at 8kHz. With the module in slave mode, the
frequency of PCM_CLK can be up to 4.096MHz.
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
Slot and Sample Formats
The module can receive and transmit on any selection of the first four slots following each sync pulse. Slot durations can
be either 8 or 16 clock cycles. Durations of 8 clock cycles may only be used with 8-bit sample formats. Durations of 16
clocks may be used with 8-bit, 13-bit or 16-bit sample formats. The module supports 13-bit linear, 16-bit linear and 8-bit
µ-law or A-law sample formats. The sample rate is 8k samples/s. The bit order may be little or big endian. When 16-bit
slots are used, the 3 or 8 unused bits in each slot may be filled with sign extension, padded with zeros or a programmable
3-bit audio attenuation compatible with some Motorola CODECs.
Figure 9. 16-bit Slot Length and Sample Formats
Additional Features
The module has a mute facility that forces PCM_OUT to be 0. In master mode, PCM_SYNC may also be forced to 0
while keeping PCM_CLK running which some CODECS use to control power down.
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
PCM Master Timing Information
Symbol
Min
Typ
Max
Unit
128
4MHz DDS
generation. Selection
of frequency is
programmable.
-
-
kHz
256
512
PCL_CLK
Frequency
48MHz DDS
fmclk
generation. Selection
of frequency is
programmable.
2.9
-
-
kHz
PCM_SYNC
frequency
8
-
-
-
kHz
4MHz DDS
generation
(a)
PCM_CLK high
PCM_CLK low
PCM_CLK jitter
980
ns
ns
tmclkh
4MHz DDS
generation
730
(a)
tmclkl
48MHz DDS
generation
-
-
21
20
20
20
20
20
20
-
ns pk-pk
ns
Delay time from PCM_CLK high to
PCM_SYNC high
tdmclksynch
tdmclkpout
tdmclklsyncl
tdmclkhsyncl
tdmclklpoutz
tdmclkhpoutz
tsupinclkl
-
-
-
-
-
-
-
-
Delay time from PCM_CLK high to valid
PCM_OUT
-
ns
Delay time from PCM_CLK low to
PCM_SYNC low (Long Frame Sync only)
-
ns
Delay time from PCM_CLK high to
PCM_SYNC low
-
ns
Delay time from PCM_CLK low to
PCM_OUT high impedance
-
ns
Delay time from PCM_CLK high to
PCM_OUT high impedance
-
ns
Set-up time for PCM_IN valid to
PCM_CLK low
30
10
ns
Hold time for PCM_CLK low to PCM_IN
invalid
thpinclkl
-
ns
(a) Assumes normal system clock operation. Figures will vary during low power modes, when system clock speeds are reduced.
Figure 10. PCM Master Timing Long Frame Sync
Figure 11. PCM Master Timing Short Frame Sync
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
PCM Slave Timing Information
Symbol
Parameter
Min
Typ
Max
2048
4096
-
Unit
kHz
kHz
ns
fsclk
fsclk
tsclkl
tsclkh
PCM clock frequency (Slave mode: input)
PCM clock frequency (GCI mode)
PCM_CLK low time
64
-
-
-
-
128
200
200
PCM_CLK high time
-
ns
Hold time from PCM_CLK low to
PCM_SYNC high
thsclksynch
tsusclksynch
30
30
-
-
-
-
ns
ns
Set-up time for PCM_SYNC high to
PCM_CLK low
Delay time from PCM_SYNC or
tdpout
tdsclkhpout
tdpoutz
PCM_CLK whichever is later, to valid
PCM_OUT data (Long Frame Sync only)
-
-
-
-
-
-
ns
ns
ns
20
20
Delay time from CLK high to PCM_OUT
valid data
Delay time from PCM_SYNC or
PCM_CLK low, whichever is later, to
PCM_OUT data line high impedance
20
-
tsupinsclkl
thpinsclkl
Set-up time for PCM_IN valid to CLK low
30
30
-
-
ns
ns
Hold time for PCM_CLK low to PCM_IN
invalid
-
Figure 12. PCM Slave Timing Long Frame Sync
Figure 13. PCM Slave Timing Short Frame Sync
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
USB
This is a full speed (12M bits/s) USB interface for communicating with other compatible digital devices. The module
acts as a USB peripheral, responding to request from a master host controller, such as a PC.
The USB interface is capable of driving a USB cable directly. No external USB transceiver is required. The device
operates as a USB peripheral, responding to requests from a master host controller such as a PC. Both the OHCI and the
UHCI standards are supported. The set of USB endpoints implemented can behave as specified in the USB section of the
Bluetooth specification v2.0+EDR or alternatively can appear as a set of endpoints appropriate to USB audio devices
such as speakers.
The module has an internal USB pull-up resistor. This pulls the USB_DP pin weakly high when module is ready to
enumerate. It signals to the USB master that it is a full speed (12Mbit/s) USB device.
Figure 14. USB Connections
Identifier
Value
Function
Rs
27Ω Nominal
Impedance matching to USB cable
Note:
USB_ON is only used when the firmware need an input to detect if USB is connected and the USB function shall be
enabled. In such case it is shared with the module PIO terminals. If detection is not needed (firmware already runs with
USB, such as USB DFU or USB CDC), USB_ON is not needed.
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
SOFTWARE STACKS
ABBTM-NVC-MDCS42A is Bluetooth 2.1+EDR module, the embedded iNova Bluetooth Stack firmware supports the
SPP, SDP, OPP, FAX, HID Profile, and supports up to seven devices simultaneously connected.
Furthermore, the Apple iAP (iPod Accessory Protocol) which is used to connect with iOS devices has also been
implemented and included in iNova Bluetooth Stack firmware.
Please contact Abracon for support of more profiles and applications with iNova Bluetooth stack firmware.
iNOVA Stack
UART
iNova
Host Application
I/O
RFCOMM
SDP
PCM
Host MCU
L2CAP
HCI
LM
LC
Baseband
Radio
Bluetooth Module
Figure 15. iNOVA Stack
ABBTM-NVC-MDCS42A is supplied with Bluetooth 2.1+EDR compliant stack rmware. With Novacomm’s iNova
profile stacks, the host MCU can easily integrate HFP, A2DP, AVRCP, SPP, HID profiles and iAP over Bluetooth
functions.
Please refer to the Abracon Control Interface User Guide (ACCI) for the details.
To develop accessories for iOS devices or products to connect to iOS devices, the developers must register and be
approved by Apple's Made for iPod (MFi) program. Licensed developers gain access to technical documentation,
hardware components, technical support and certification logos.
Please visit Apple developer portal at the link below for more information:
http://developer.apple.com/ipod/
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
REFERENCE DESIGN
Figure 16. Reference Design
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
RF LAYOUT GUIDELINES
ABBTM-NVC-MDCS42A has an on-board PCB antenna. Therefore, antenna placement is very important to ensure a
good RF performance of the module. Figure 17 shows some examples of the module placement.
: Placement not recommended
2 , , : Recommended antenna placement
○
1
2
3
Figure 17. Placement of the Module on a Main Board
REFLOW PROFILE:
ABBTM-NVC-MDCS42A is compatible with industrial standard reflow profile for Pb-free solders. The soldering profile
depends on various parameters necessitating a set up for each application. The data here is given only for guidance on
solder re-flow.
There are four zones:
• Preheat Zone - This zone raises the temperature at a controlled rate, typically 1-2.5°C/s.
• Equilibrium Zone - This zone brings the board to a uniform temperature and also activates the flux. The duration in this
zone (typically 2-3 minutes) will need to be adjusted to optimise the out gassing of the flux.
• Reflow Zone- The peak temperature should be high enough to achieve good wetting but not so high as to cause component
discoloration or damage. Excessive soldering time can lead to intermetallic growth which can result in a brittle joint.
• Cooling Zone - The cooling rate should be fast, to keep the solder grains small which will give a longer lasting joint.
Typical rates will be 2-5°C/s.
Key features of the profile:
•
•
•
•
•
Initial Ramp = 1-2.5°C/sec to 175°C ±25°C equilibrium
Equilibrium time = 60 to 180 seconds
Ramp to Maximum temperature (250°C) = 3°C/sec max.
Time above liquidus temperature (217°C): 45-90 seconds
Device absolute maximum reflow temperature: 255°C
Figure 18. Typical Lead-Free Reflow Solder Profile for ABBTM-NVC-MDCS42A
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM- NVC-MDCS42A
FCC ID: OC3BM1842
DC: 1326
Bluetooth Module
RoHS
RoHS/RoHS II compliant
ABBTM-NVC-MDCS42A
Pb
25.8 x|13.4 x |2.2 mm SMT
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTLINE DIMENSIONS:
Recommended Land Pattern
Pin 1
Pin 32
Pin 32
Pin 1
Dimensions: mm
PACKAGING:
84pcs/tray
Dimensions: mm
Note: MSL3 packaging applies to MOQ of (50) units. Devices sold in less than MOQ quantities will be provided in an ESD bag with Desiccant.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 08.08.13
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
92688
30332Esperanza, Rancho Santa Margarita, California
|
tel 949-546-8000 fax 949-546-8001
| www.abracon.com
ABBTM-NVC-MDCS42A 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| ABBTM-NVC-MDCS71 | ABRACON | Telecom Circuit, 1-Func, ROHS COMPLIANT, SMT-25 | 获取价格 |
|
| ABC | ETC | 获取价格 |
|
|
| ABC-1 | COOPER | Consumer Aftermarket Product Catalog | 获取价格 |
|
| ABC-1-1/2-R | EATON | 1â4â x 1 1â4â Fast-acting ceramic tube fuses | 获取价格 |
|
| ABC-1-12 | COOPER | Fast-acting, ceramic tube | 获取价格 |
|
| ABC-1-12-R | COOPER | ABC Series, Fast-Acting, Ceramic Tube | 获取价格 |
|
| ABC-1-4 | COOPER | Fast-acting, ceramic tube | 获取价格 |
|
| ABC-1-R | COOPER | Fast-acting, ceramic tube Optional axial leads available | 获取价格 |
|
| ABC-1-R | EATON | 1â4â x 1 1â4â Fast-acting ceramic tube fuses | 获取价格 |
|
| ABC-1/2 | COOPER | Consumer Aftermarket Product Catalog | 获取价格 |
|
ABBTM-NVC-MDCS42A 相关文章
LG电子大幅缩减储能业务，解散产品开发团队
- 2025-01-17
- 11
SK 海力士有望2月启动业界最先进1c nm制程DRAM量产
- 2025-01-17
- 11
英飞凌泰国北榄府半导体后端生产基地正式动工
- 2025-01-17
- 10
台积电回应CoWoS砍单传闻：纯属谣言，公司持续扩产以满足客户需求
- 2025-01-17
- 11
