首页 > PTH03030WAH

PTH03030WAH

更新时间：2025-07-01 06:40:41
品牌：ARTESYN
描述：DC-DC CONVERTERS POLA Non-isolated

PDF下载

中文翻译

免费 PCB/SMT

PTH03030WAH 概述

DC-DC CONVERTERS POLA Non-isolated DC-DC变换器的POLA非隔离 DC/DC转换器 电源模块

PTH03030WAH 规格参数

是否无铅： 含铅是否Rohs认证： 不符合
生命周期：Transferred包装说明：,
Reach Compliance Code：unknownECCN代码：EAR99
风险等级：5.2模拟集成电路 - 其他类型：DC-DC REGULATED POWER SUPPLY MODULE
最大输入电压：3.65 V最小输入电压：2.95 V
标称输入电压：3.3 VJESD-30 代码：R-XDMA-P13
JESD-609代码：e0功能数量：1
输出次数：1端子数量：13
最大输出电压：2.5 V最小输出电压：0.8 V
封装主体材料：UNSPECIFIED封装形状：RECTANGULAR
封装形式：MICROELECTRONIC ASSEMBLY峰值回流温度（摄氏度）：NOT SPECIFIED
认证状态：Not Qualified表面贴装：NO
技术：HYBRID端子面层：TIN LEAD
端子形式：PIN/PEG端子位置：DUAL
处于峰值回流温度下的最长时间：NOT SPECIFIED最大总功率输出：75 W
微调/可调输出：YESBase Number Matches：1

PTH03030WAH 数据手册

通过下载PTH03030WAH数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
PTH03030  
3 . 3 V i n s i n g l e o u t p u t  
DC-DC CONVERTERS POLA Non-isolated  
1
NEW Product  
• 30 A output current  
• 3.3 V input voltage  
• Wide-output voltage adjust (0.8 Vdc to 2.5 Vdc)  
• Auto-track™ sequencing*  
• Margin up/down controls  
• Pre-bias start-up capability  
• Efficiencies up to 93%  
• Output ON/OFF inhibit  
• Output voltage sense  
• Point-of-Load-Alliance (POLA) compatible  
• Available RoHS compliant  
The PTH03030 is a next generation series of non-isolated dc-dc converters offering some  
of the most advanced POL features available in the industry. The primary new feature  
provides for sequencing between multiple modules, a function, which is becoming a  
necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring  
controlled power-up and power-down. Other industry leading features include margin  
up/down controls, pre-bias start-up capability and efficiencies up to 93%. The PTH03030  
has an input voltage of 2.95 Vdc to 3.65 Vdc and offers a wide 0.8 Vdc to 2.5 Vdc output  
voltage range with up to 30 A output current, which allows for maximum design flexibility  
and a pathway for future upgrades.  
2 YEAR WARRANTY  
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated  
SPECIFICATIONS  
C
in = 1500 µF, Cout = 0 µF  
OUTPUT SPECIFICATIONS  
EMC CHARACTERISTICS  
Voltage adjustability  
Setpoint accuracy  
Line regulation  
(See Note 4)  
0.8-2.5 Vdc  
2.0% Vo  
Electrostatic discharge  
Conducted immunity  
Radiated immunity  
EN61000-4-2, IEC801-2  
EN61000-4-6  
EN61000-4-3  
10 mV typ.  
12 mV typ.  
3.0% Vo  
GENERAL SPECIFICATIONS  
Efficiency  
Load regulation  
Total regulation  
Minimum load  
(See Efficiency Table)  
93% max.  
Non-isolated  
Insulation voltage  
0 A  
Switching frequency  
275 kHz to 325 kHz  
Ripple and noise  
20 MHz bandwidth  
30 mV pk-pk  
0.5% Vo  
Approvals and  
standards  
EN60950  
UL/cUL60950  
Temperature co-efficient -40 ºC to +85 ºC  
Transient response  
70 µs recovery time  
Material flammability  
UL94V-0  
(See Note 5)  
Overshoot/undershoot 100 mV  
Dimensions  
(L x W x H)  
34.80 x 28.45 x 9.00 mm  
1.370 x 1.120 x 0.354 in  
Margin adjustment  
5.0% Vo  
Weight  
MTBF  
10 g (0.35 oz)  
INPUT SPECIFICATIONS  
Input voltage range  
Input current  
Telcordia SR-332  
2,821,000 hours  
(See Note 3)  
2.95-3.65 Vdc  
10 mA typ.  
Positive logic  
1 V/ms  
No load  
ENVIRONMENTAL SPECIFICATIONS  
Remote ON/OFF  
Start-up time  
(See Note 1)  
Thermal performance  
(See Note 2)  
Operating ambient,  
temperature  
Non-operating  
-40 ºC to +85 ºC  
-40 ºC to +125 ºC  
Level 3  
Undervoltage lockout  
Track input voltage  
2.8-2.95 V typ.  
0.3 Vin  
MSL (‘Z’ suffix only)  
JEDEC J-STD-020C  
Auto reset  
Pin 11 (See Note 6, 7)  
PROTECTION  
Short-circuit  
Thermal  
45 A typ.  
Yes  
International Safety Standard Approvals  
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,  
File No. E174104  
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044  
CB Report and Certificate to IEC60950, Certificate No.  
US/8292/UL  
*Auto-track™ is a trade mark of  
Texas Instruments  
File Name: pth03030.pdf Rev (07): 16 Dec 2005  
PTH03030  
3 . 3 V i n s i n g l e o u t p u t  
DC-DC CONVERTERS POLA Non-isolated  
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm  
NEW Product  
OUTPUT  
POWER  
(MAX.)  
OUTPUT  
CURRENT  
(MIN.)  
OUTPUT  
CURRENT  
(MAX.)  
REGULATION  
INPUT  
OUTPUT  
VOLTAGE  
EFFICIENCY  
(MAX.)  
MODEL  
VOLTAGE  
NUMBER (9,10)  
LINE  
10 mV  
LOAD  
75 W  
2.95-3.65 Vdc  
0.8-2.5 Vdc  
0 A  
30 A  
93%  
12 mV  
PTH03030  
Part Number System with Options  
P T H 0 3 0 3 0 W A S T  
Packaging Options  
No Suffix = Trays  
T = Tape and Reel (8)  
Product Family  
Point of Load Alliance  
Compatible  
Mounting Option (9)  
D = Horizontal Through-Hole (Matte Sn)  
H = Horizontal Through-Hole (Sn/Pb)  
Input Voltage  
03 = 3.3 V  
S = Surface-Mount (63/37 Sn/Pb  
pin solder material)  
Z = Surface-Mount (96.5/3.0/0.5 Sn/Ag/Cu  
pin solder material)  
Output Current  
03 = 30 A  
Pin Option  
Mechanical Package  
A = Through-Hole Std. Pin Length (0.140”)  
A = Surface-Mount Tin/Lead Solder Balll  
Always 0  
Output Voltage Code  
W = Wide  
Output Voltage Adjustment of the PTH03030 Series  
The ultra-wide output voltage trim range offers major advantages to users who  
select the PTH03030. It is no longer necessary to purchase a variety of  
modules in order to cover different output voltages. The output voltage can be  
trimmed in a range of 0.8 Vdc to 2.5 Vdc. When the PTH03030 converter  
leaves the factory the output has been adjusted to the default voltage of 0.8 V.  
Notes  
EFFICIENCY TABLE (IO = 20 A)  
1
Remote ON/OFF. Positive Logic  
OUTPUT VOLTAGE  
Vo = 1.0 V  
EFFICIENCY  
85%  
ON:  
OFF:  
Pin 3 open; or V > Vin - 0.5 V  
Pin 3 GND; or V < 0.8 V (min - 0.2 V)  
2
3
See Figure 1 for safe operating curve.  
A 1,500 µF electrolytic input capacitor is required for proper operation.  
The capacitor must be rated for a minimum of 900 mA rms of ripple  
current.  
An external output capacitor is not required for basic operation. Adding  
330 µF of distributed capacitance at the load will improve the transient  
response.  
Vo = 1.2 V  
87%  
Vo = 1.5 V  
89%  
4
Vo = 1.8 V  
91%  
5
6
7
1 A/µs load step, 50 to 100% I  
If utilized Vout will track applied voltage by 0.3 V (up to Vo set point).  
The pre-bias start-up feature is not compatible with Auto-Track . This is  
because when the module is under Auto-Track control, it is fully active  
, C  
= 330 µF.  
omax  
out  
Vo = 2.0 V  
92%  
™
™
Vo = 2.5 V  
93%  
and will sink current if the output voltage is below that of a back-feeding  
source. Therefore to ensure a pre-bias hold-off, one of the following two  
techniques must be followed when input power is first applied to the  
™
module. The Auto-Track function must either be disabled, or the  
module’s output held off using the Inhibit pin. Refer to Application Note  
152 for more details.  
Tape and reel packaging only available on the surface-mount versions.  
To order Pb-free (RoHS compatible) surface-mount parts replace the  
mounting option ‘S’ with ‘Z’, e.g. PTH03030WAZ. To order Pb-free  
(RoHS compatible) through-hole parts replace the mounting option ‘H’  
with ‘D’, e.g. PTH03030WAD.  
8
9
10 NOTICE: Some models do not support all options. Please contact your  
local Artesyn representative or use the on-line model number search tool at  
http://www.artesyn.com/powergroup/products.htm to find a suitable  
alternative.  
File Name: pth03030.pdf Rev (07): 16 Dec 2005  
PTH03030  
3 . 3 V i n s i n g l e o u t p u t  
DC-DC CONVERTERS POLA Non-isolated  
3
For the most current data and application support visit www.artesyn.com/powergroup/products.htm  
NEW Product  
90  
80  
70  
60  
50  
40  
30  
20  
100  
90  
80  
70  
60  
50  
40  
Vout  
2.5V  
1.8V  
1.5V  
1.2V  
0.8V  
400 LFM  
200 LFM  
100 LFM  
Nat conv  
0
5
10  
15  
20  
25  
30  
0
5
10  
15  
20  
25  
30  
OUTPUT CURRENT (A)  
OUTPUT CURRENT (A)  
Figure 2 - Efficiency vs Load Current  
Vin = 3.3 V (See Note B)  
Figure 1 - Safe Operating Area  
Vin = 3.3 V, Output Voltage = 2.5 V (See Note A)  
Notes  
Track  
Margin Down  
A
B
SOA curves represent the conditions at which internal components are  
within the Artesyn derating guidelines.  
Characteristic data has been developed from actual products tested at  
25 °C. This data is considered typical data for the converter.  
Margin Up  
13  
12 11  
1
2
10  
9
8
Vin  
PTH03030  
(Top View)  
Vout  
7
3
L
4
5
6
O
A
D
Inhibit  
Vo Sense  
+
+
C
in 1,500µF  
C
out 330µF  
R
SET 0.5%, 0.1W  
(Required)  
(Optional)  
(Required)  
GND  
GND  
Figure 3 - Standard Application  
File Name: pth03030.pdf Rev (07): 16 Dec 2005  
PTH03030  
3 . 3 V i n s i n g l e o u t p u t  
DC-DC CONVERTERS POLA Non-isolated  
4
For the most current data and application support visit www.artesyn.com/powergroup/products.htm  
NEW Product  
1.370 (34.80)  
0.125 (3.18)  
0.125 (3.18)  
0.140  
(3.55)  
0.060  
(1.52)  
0.060  
(1.52)  
0.500  
0.500  
(12.70)  
(12.70)  
ø
0.040 (1.02)  
13 Places  
10  
0.125 (3.18)  
13 12 11  
1
0.500  
(12.70)  
0.375  
(9.52)  
Lowest Component  
0.010 min. (0.25)  
Bottom side Clearance  
1.120  
(28.45)  
2
3
9
8
0.125 (3.18)  
0.375  
(9.52)  
PIN CONNECTIONS  
0.375  
(9.52)  
(0.070 (1.78)  
PIN NO.  
FUNCTION  
Ground  
Vin  
(Standoff Shoulder)  
5
6
4
1
2
7
TOP VIEW  
Host Board  
3
Ground  
Inhibit*  
0.354 (9.00)  
max.  
Dimensions in Inches (mm)  
Tolerances (unless otherwise specified)  
2 Places 0.030 ( 0.76)  
4
SIDE VIEW  
3 Places 0.010 ( 0.25)  
5
Vo adjust  
Vo sense  
Ground  
Vout  
Figure 4 - Plated Through-Hole Mechanical Drawing  
6
7
8
9
Vout  
1.370 (34.80)  
10  
11  
12  
13  
Ground  
Track  
0.125 (3.18)  
0.125 (3.18)  
0.354 (9.00)  
max.*  
*After solder reflow  
on customer board  
0.060  
(1.52)  
0.060  
(1.52)  
0.500  
(12.70)  
0.500  
(12.70)  
Margin down*  
Margin up*  
10  
Solder Ball  
0.125 (3.18)  
13 12 11  
1
ø
0.040 (1.02)  
13 Places  
0.500  
*Denotes negative logic:  
Open = Normal operation  
Ground = Function active  
0.375  
(9.52)  
(12.70)  
1.120  
(28.45)  
2
3
9
8
0.125 (3.18)  
0.375  
(9.52)  
0.375  
(9.52)  
4
5
6
7
TOP VIEW  
SIDE VIEW  
Dimensions in Inches (mm)  
Tolerances (unless otherwise specified)  
2 Places 0.030 ( 0.76)  
3 Places 0.010 ( 0.25)  
Figure 5 - Surface-Mount Mechanical Drawing  
Datasheet © Artesyn Technologies  
® 2005  
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising  
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent  
accompany the sale of any such product(s) or information contained herein.  
Please consult our website for the following items: ꢀ Application Note  
www.artesyn.com  
File Name: pth03030.pdf Rev (07): 16 Dec 2005  

PTH03030WAH 替代型号

型号 制造商 描述 替代类型 文档
PMJ4718TP ERICSSON DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid, ROHS COMPLIANT, 13 PIN 类似代替
PTH03030WAH TI 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module 功能相似

PTH03030WAH 相关器件

型号 制造商 描述 价格 文档
PTH03030WAHT ARTESYN DC-DC CONVERTERS POLA Non-isolated 获取价格
PTH03030WAS ARTESYN DC-DC CONVERTERS POLA Non-isolated 获取价格
PTH03030WAS TI 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module 获取价格
PTH03030WAST ARTESYN DC-DC CONVERTERS POLA Non-isolated 获取价格
PTH03030WAST TI 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module 获取价格
PTH03030WAST EMERSON-NETWORKPOWER DC-DC CONVERTERS POLA Non-isolated 获取价格
PTH03030WAZ ARTESYN DC-DC CONVERTERS POLA Non-isolated 获取价格
PTH03030WAZ TI 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module 获取价格
PTH03030WAZT ARTESYN DC-DC CONVERTERS POLA Non-isolated 获取价格
PTH03030WAZT TI 30-A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module 获取价格

PTH03030WAH 相关文章

  • 台积电新布局：CoPoS 将接棒 CoWoS 成高端芯片封装主流
    2025-07-04
    6
  • 震惊！英特尔 18A 制程对外代工或终止，聚焦 14A 工艺
    2025-07-03
    36
  • 南芯科技：电源到车身控制，车规核心场景的突破秘诀
    2025-07-03
    32
  • 一文搞懂运算放大器和比较器的本质区别
    2025-07-03
    19

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 规格参数
  • 数据手册
  • 替代型号
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286