DS1035Z-020
更新时间：2024-12-03 02:44:50
品牌：DALLAS
描述：Silicon Delay Line, 3-Func, 1-Tap, True Output, CMOS, PDSO8, 0.150 INCH, SOIC-8
概述
规格参数
数据手册DS1035Z-020 概述
Silicon Delay Line, 3-Func, 1-Tap, True Output, CMOS, PDSO8, 0.150 INCH, SOIC-8 延迟线
DS1035Z-020 规格参数
| 生命周期： | Transferred | 包装说明： | 0.150 INCH, SOIC-8 |
| Reach Compliance Code： | unknown | 风险等级： | 5.82 |
| 其他特性： | BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 LS LOAD PER OUTPUT | 系列： | CMOS/TTL |
| 输入频率最大值（fmax）： | 25 MHz | JESD-30 代码： | R-PDSO-G8 |
| 负载电容（CL）： | 15 pF | 逻辑集成电路类型： | SILICON DELAY LINE |
| 功能数量： | 3 | 抽头/阶步数： | 1 |
| 端子数量： | 8 | 最高工作温度： | 70 °C |
| 最低工作温度： | 输出极性： | TRUE | |
| 封装主体材料： | PLASTIC/EPOXY | 封装代码： | SOP |
| 封装形状： | RECTANGULAR | 封装形式： | SMALL OUTLINE |
| 可编程延迟线： | NO | 认证状态： | Not Qualified |
| 最大供电电压 (Vsup)： | 5.25 V | 最小供电电压 (Vsup)： | 4.75 V |
| 标称供电电压 (Vsup)： | 5 V | 表面贴装： | YES |
| 技术： | CMOS | 温度等级： | COMMERCIAL |
| 端子形式： | GULL WING | 端子位置： | DUAL |
| 总延迟标称（td）： | 20 ns |
DS1035Z-020 数据手册
通过下载DS1035Z-020数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载DS1035
3-in-1 High–Speed Silicon Delay Line
www.dalsemi.com
FEATURES
PIN ASSIGNMENT
ꢀ All-silicon timing circuit
8
7
VCC
1
IN1
IN2
ꢀ Three independent buffered delays
ꢀ Stable and precise over temperature and
voltage
ꢀ Leading and trailing edge precision preserves
the input symmetry
ꢀ Standard 8-pin DIP and 8-pin SOIC (150 mil)
ꢀ Vapor phasing, IR and wave solderable
ꢀ Available in Tape and Reel
OUT1
2
6
5
3
4
OUT2
OUT3
IN3
GND
DS1035M 8-Pin DIP
See Mech. Drawings Section
1
2
8
7
VCC
IN1
IN2
OUT1
OUT2
OUT3
IN3
3
4
6
5
GND
DS1035Z 8-Pin SOIC (150-mil)
See Mech. Drawings Section
PIN DESCRIPTION
IN1-IN3
OUT1-OUT3
NC
VCC
GND
- Input Signals
- Output Signals
- No Connection
- +5 Volt Supply
- Ground
(Sub)
- Internal substrate
connection, do not make
any external connections
to these pins
DESCRIPTION
The DS1035 series is a low-power +5-volt high-speed version of the popular DS1013 and complements
the DS1033 +3.3 Volt version.
The DS1035 series of delay lines have three independent logic buffered delays in a single package. The
device is Dallas Semiconductor’s fastest 3-in-1 delay line. It is available in a standard 8-pin DIP and 150
Mil 8-pin Mini-SOIC.
The device features precise leading and trailing edge accuracies. It has the inherent reliability of an all-
silicon delay line solution. The DS1035’s initial tolerance is ±1.5 or ±2.0 ns with an additional tolerance
over temperature and voltage of ±1.0 ns or ±1.5 ns, depending on the delay value. Each output is capable
of driving up to 10 LS loads.
Standard delay values are indicated in Table 1. Customers may contact Dallas Semiconductor at (982)
371-4348 for further information.
1 of 6
111799
DS1035
LOGIC DIAGRAM Figure 1
PART NUMBER DELAY TABLE (tPLH , tPHL) Table 1
TOLERANCE OVER
TEMPERATURE
AND VOLTAGE
±1.0 ns
DELAY PER
PART NUMBER
DS1035-60
DS1035-80
DS1035-10
DS1035-12
DS1035-15
DS1035-20
DS1035-25
DS1035-30
OUTPUT (ns)
INITIAL TOLERANCE
±1.5 ns
6/6/6
8/8/8
±1.5 ns
±1.5 ns
±1.5 ns
±1.5 ns
±1.5 ns
±2.0 ns
±2.0 ns
±1.0 ns
±1.0 ns
±1.0 ns
±1.5 ns
±1.5 ns
±1.5 ns
±1.5 ns
10/10/10
12/12/12
15/15/15
20/20/20
25/25/25
30/30/30
NOTES:
1. Nominal conditions are +25°C and VCC=+5.0 volts.
2. Temperature range of 0°C to 70°C and voltage range of 4.75 volts to 5.25 volts.
3. Delay accuracy is for both leading and trailing edges.
2 of 6
DS1035
TEST SETUP DESCRIPTION
Figure 2 illustrates the hardware configuration used for measuring the timing parameters of the DS1035.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution ) connected to the output. The DS1035 output taps
are selected and connected to the interval counter by a VHF switch control unit. All measurements are
fully automated with each instrument controlled by the computer over an IEEE 488 bus.
DS1035 TEST CIRCUIT Figure 2
3 of 6
DS1035
ABSOLUTE MAXIMUM RATINGS*
Voltage on Any Pin Relative to Ground
Operating Temperature
-1.0V to +7.0V
0°C to 70°C
Storage Temperature
Soldering Temperature
Short Circuit Output Current
-55°C to +125°C
260°C for 10 seconds
50 mA for 1 second
* This is a stress rating only and functional operation of the device at these or any other conditions above
those indicated in the operation sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods of time may affect reliability.
DC ELECTRICAL CHARACTERISTICS
(0°C to 70°C; VCC =+5V ± 5%)
PARAMETER
SYMBOL
TEST
MIN
TYP
MAX
UNITS
CONDITION
Supply Voltage
VCC
ICC
VIH
VIL
IL
4.75
5.00
5.25
35
V
mA
V
VCC=5.25V
Period=1µs
Active Current
VCC
+0.5
High Level Input Voltage
Low Level Input Voltage
Input Leakage
2.2
-0.5
-1.0
0.8
+1.0
-1.0
V
0V≤VI≤VCC
µA
mA
mA
VCC=4.75V
VOH=4V
VCC=4.75V
VOL=0.5V
High Level Output Current
Low Level Output Current
IOH
IOL
12
AC ELECTRICAL CHARACTERISTICS
(+25°C; VCC =5V ± 5%)
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS NOTES
Period
tPERIOD
2 (tWI)
ns
ns
ns
ns
ms
3
3
100% of
Tap Delay
Input Pulse Width
tWI
Input-to-Tap Output Delay
Output Rise or Fall Time
Power-up Time
tPLH, tPHL
Table 1
2.0
tOR, OF
t
2.5
tPU
100
CAPACITANCE
(TA =25°C)
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS NOTES
Input Capacitance
CIN
10
pF
4 of 6
DS1035
TEST CONDITIONS
Ambient Temperature:
Supply Voltage (VCC):
Input Pulse:
25°C ±=3°C
5.0V ±=0.1V
High: 3.0V ±=0.1V
Low: 0.0V ±=0.1V
Source Impedance: 50Ω=max.
Rise and Fall Time: 3.0 ns max. - Measured between 0.6V and 2.4V.
Pulse Width: 500 ns
Pulse Period: 1 µs
Output Load Capacitance: 15 pF
Output:
Each output is loaded with the equivalent of one 74F04 input gate.
Data is measured at the 1.5V level on the rising and falling edges.
Note: The above conditions are for test only and do not restrict the devices under other data sheet
conditions.
TIMING DIAGRAM
NOTES:
1. All voltages are referenced to ground.
2. @ VCC=5 volts and 25°C, delay accuracy on both the rising and falling edges within tolerances given
in Table 1.
3. Pulse width and duty cycle specifications may be exceeded; however, accuracy will be application
sensitive with respect to decoupling, layout, etc.
5 of 6
DS1035
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
tWI(Pulse Width): The elapsed time on the pulse between the 1.5 volt point on the leading edge and the
1.5 volt point on the trailing edge, or the 1.5 volt point on the trailing edge and the 1.5 volt point on the
leading edge.
tRISE(Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
input pulse.
tFALL(Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge on the
input pulse.
tPLH(Time Delay, Rising): The elapsed time between the 1.5 volt point on the leading edge of the input
pulse and the 1.5 volt point on the leading edge of the output pulse.
tPHL(Time Delay, Falling): The elapsed time between the 1.5 volt point on the falling edge of the input
pulse and the 1.5 volt point on the falling edge of the output pulse.
6 of 6
DS1035Z-020 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| DS1035Z-030 | DALLAS | Silicon Delay Line, 3-Func, 1-Tap, True Output, CMOS, PDSO8, 0.150 INCH, SOIC-8 | 获取价格 |
|
| DS1035Z-10 | DALLAS | 3-in-1 High.Speed Silicon Delay Line | 获取价格 |
|
| DS1035Z-10 | ROCHESTER | SILICON DELAY LINE, TRUE OUTPUT, PDSO8, 0.150 INCH, SOIC-8 | 获取价格 |
|
| DS1035Z-10T | DALLAS | Silicon Delay Line, 3-Func, 1-Tap, True Output, CMOS, PDSO8, | 获取价格 |
|
| DS1035Z-12 | DALLAS | 3-in-1 High.Speed Silicon Delay Line | 获取价格 |
|
| DS1035Z-12 | ROCHESTER | SILICON DELAY LINE, TRUE OUTPUT, PDSO8, 0.150 INCH, SOIC-8 | 获取价格 |
|
| DS1035Z-12T | DALLAS | 暂无描述 | 获取价格 |
|
| DS1035Z-15 | DALLAS | 3-in-1 High.Speed Silicon Delay Line | 获取价格 |
|
| DS1035Z-15T | DALLAS | Silicon Delay Line, 3-Func, 1-Tap, True Output, CMOS, PDSO8, | 获取价格 |
|
| DS1035Z-20 | DALLAS | 3-in-1 High.Speed Silicon Delay Line | 获取价格 |
|
DS1035Z-020 相关文章
苹果Apple Intelligence适配百度AI模型遇技术挑战
- 2024-12-05
- 8
苹果携手亚马逊，定制AI芯片助力Apple Intelligence模型训练
- 2024-12-05
- 7
革命性突破：光衍射极限下微型步行机器人成功面世
- 2024-12-05
- 9
Soitec将为格罗方德9SW平台供应300mm RF-SOI晶圆
- 2024-12-05
- 7
