ZX 3.9 ... ZX 200 (12.5 W)
Silicon-Power-Z-Diodes
(non-planar technology)
Silizium-Leistungs-Z-Dioden
(flächendiffundierte Dioden)
Maximum power dissipation
Maximale Verlustleistung
12.5 W
7
Ø2
Nominal Z-voltage – Nominale Z-Spannung
Metal case – Metallgehäuse
3.9…200 V
DO-4
Type
Weight approx. – Gewicht ca.
5.5 g
SW11
M5
Standard polarity:
Index R:
Cathode to stud / Gewinde
Anode to stud / Gewinde (e.g. ZX ...R)
Standard packaging: bulk
Standard Lieferform: lose im Karton
Dimensions / Maße in mm
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationalen
Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings
Grenzwerte
Power dissipation without cooling fin
Verlustleistung ohne Kühlblech
TA = 25 ꢀC
TA = 25 ꢀC
TA = 25 ꢀC
Ptot
1.6 W
Power dissipation with cooling fin 150 cm2
Verlustleistung mit Kühlblech 150 cm2
Ptot
12.5 W
100 W
Non repetitive peak power dissipation, t < 10 ms
Einmalige Impuls-Verlustleistung, t < 10 ms
PZSM
Admissible torque for mounting on cooling fin
Zulässiges Anzugsdrehmoment
1 Nm
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Tj
– 55…+150ꢀC
TS – 55…+175ꢀC
Thermal resistance junction to ambient air
RthA
< 80 K/W
< 5 K/W 1)
Wärmewiderstand Sperrschicht – umgebende Luft
Thermal resistance junction to stud
RthC
Wärmewiderstand Sperrschicht – Schraube
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1
)
Valid if mounted on vertical cooling fin 150 cm2 – Gültig bei Montage auf senkrecht stehendem Kühlblech 150 cm2
1
10.09.2002