47LLC-S240BG-M2/Q

更新时间:2024-12-02 22:28:02
品牌:MSYSTEM
描述:Digital Panel Meters 47 Series

47LLC-S240BG-M2/Q 概述

Digital Panel Meters 47 Series

47LLC-S240BG-M2/Q 数据手册

通过下载47LLC-S240BG-M2/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: 47LLC  
Digital Panel Meters 47 Series  
[3] ALARM OUTPUT  
0: None  
1: N.O. relay contact, 4 points  
2: SPDT relay contact, 2 points  
3: Photo MOSFET relay, N.O., 4 points  
STRAIN GAUGE INPUT DIGITAL PANEL METER  
(4½ digit, LED display type)  
Functions & Features  
• 4½ digit strain gauge input digital panel meter  
• 1/8 DIN size  
[4] DISPLAY COLOR  
R: Red  
• Moving average function to suppress the display flickering  
• Scaling, tare adjustment, low-end cutout  
• Max. and Min. value display  
YR: Orange  
G: Green  
• Safety terminal cover tethered to the device with a strap  
• IP66 front panel  
BG: Bluegreen  
B: Blue  
• Separable terminal block  
W: White  
[5] POWER INPUT  
96 (3.78)  
AC Power  
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)  
H
H
DC Power  
H
48  
(1.89)  
P
L
L
L
Zr  
o
Sp  
n
D/P  
R: 24 V DC  
Tc  
h
Fnc  
Mi  
n
Max  
Ma  
x/M  
in  
A
la  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
P: 110 V DC  
rm  
/
S
ca  
le  
/
S
hif  
t
U
p
98.5 (3.88)  
mm (inch)  
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
[6] OPTIONS  
MODEL: 47LLC-[1][2][3][4]-[5][6]  
blank: none  
/Q: With options (specify the specification)  
ORDERING INFORMATION  
• Code number: 47LLC-[1][2][3][4]-[5][6]  
Specify a code from below for each of [1] through [6].  
(e.g. 47LLC-S101G-M2/Q)  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
Moving parts and indicators are not coated.  
/C01: Silicone coating  
• Specify the specification for option code /Q  
(e.g. /C01/S01/SET)  
/C02: Polyurethane coating  
/C03: Rubber coating  
[1] INPUT STRAIN GAUGE  
S1: 0.0 – 1.0 mV/V  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
S2: 0.0 – 3.0 mV/V  
EX-FACTORY SETTING  
S3: 0.0 – 10.0 mV/V  
/SET: Preset according to the Ordering Information Sheet  
(No. ESU-9505)  
S4: 0.0 – 30.0 mV/V  
[2] DC OUTPUT  
0: Without  
GENERAL SPECIFICATIONS  
Construction: Panel flush mounting  
Current  
Degree of protection: IP66; applicable to the front of the  
panel meter mounted according to the specified panel  
cutout  
A: 4 – 20 mA DC (Load resistance 550 Ω max.)  
D: 0 – 20 mA DC (Load resistance 550 Ω max.)  
Voltage  
Connection: M3 separable screw terminal (torque 0.6 N·m)  
Screw terminal: Nickel-plated steel (standard) or stainless  
steel  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)  
Housing material: Flame-resistant resin (gray)  
Isolation: Strain gauge input or excitation or contact input or  
SG to DC output to HH output or H output to L output or LL  
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 1/7  
http://www.m-system.co.jp/  
MODEL: 47LLC  
output to power  
INPUT SPECIFICATIONS  
Strain Gauge Input  
Excitation: 2.5 V, 5 V, 7.5 V or 10 V selectable (front)  
Tare adjustment: Via the front button control or by the  
external contact input  
Strain Gauge: Refer to the next table  
Excitation: 2.5 V, 5 V, 7.5 V or 10 V selectable  
Maximum current: 120 mA  
Setting: (Front button)  
• Scaled range  
Load resistance: ≥ 85 Ω  
• Alarm setpoint  
Default setting: 2.5 V  
• Hysteresis (deadband)  
Tare Command Input: TTL level (5V-CMOS level), open  
collector or dry contact  
• Moving average  
• Others  
(saturation voltage ≤ 1 V, sink current 0.5 mA)  
(Refer to the instruction manual for details)  
Read rate: 40 times/sec. (25 msec.)  
Averaging: None or moving average  
Lockout setting: Prohibiting certain operations; protecting  
settings  
TYPE  
S1  
STRAIN GAUGE RATING  
0.0 – 1.0mV/V  
ZERO ADJUSTMENT  
-10.00 – +10.00mV  
-30.00 – +30.00mV  
-100.0 – +100.0mV  
-300.0 – +300.0mV  
S2  
0.0 – 3.0mV/V  
S3  
0.0 – 10.0mV/V  
0.0 – 30.0mV/V  
S4  
SPAN  
INPUT VOLTAGE  
-10.00 – +20.00mV  
-30.00 – +60.00mV  
-100.0 – +200.0mV  
-300.0 – +600.0mV  
TYPE  
S1  
1.00 – 10.00mV  
3.00 – 30.00mV  
10.0 – 100.0mV  
30.0 – 300.0mV  
DISPLAY  
S2  
Display: 16 mm (.63) high, 4 ½ digits, 7-segment LED  
S3  
Display range: -19999 to 19999  
S4  
Decimal point position: 10–1, 10–2, 10–3, 10–4 or none  
Zero indication: Higher-digit zeros are suppressed.  
Over-range indication: ‘-19999’ or ‘19999’ blinking for  
display values out of the scaled range.  
‘S.ERR’ and ‘Max’ blinking when the input signal is out of  
the usable range.  
Note 1: Choose Type S2 for the strain gauge rating 2.0mV/V with the  
excitation voltage 10V.  
For detailed information, refer to “Input Scaling Values A/B v.s.  
Tare Adjustment” under “PARAMETER LIST” on the instruction manual.  
Note 2: Consult factory for use with a compression/tension load cells.  
Alarm status indication  
OUTPUT SPECIFICATIONS  
■ DC Output  
LL indicator: Green LED turns on when the LL alarm is  
tripped.  
• DC Current  
L indicator: Green LED turns on when the L alarm is  
tripped.  
Operational range: -5 – +105 %  
• DC Voltage  
H indicator: Red LED turns on when the H alarm is tripped.  
HH indicator: Red LED turns on when the HH alarm is  
tripped.  
Operational range: -5 – +105 %  
Alarm Output  
• Relay contact  
P indicator: Amber LED turns on when none of the other  
alarms is tripped.  
Rated load: 250 V AC @ 3 A (cos ø = 1)  
30 V DC @ 3 A (resistive load)  
Maximum switching voltage: 250 V AC, 30 V DC  
Maximum switching power: 750 VA, 90 W (resistive load)  
Minimum load: 5 V DC @ 10 mA  
Only ‘P’ turns on with no-alarm-output type. ‘LL’ or ‘HH’  
does not turn on with dual-alarm-output type.  
All setpoints can be independently set either for Hi or Lo  
alarm trip.  
Mechanical life: ≥ 5 × 10  
6
cycles (rate 180 cycles/min.)  
Function indicators:  
• Photo MOSFET Relay  
Zro, Spn, D/P, Tch, Fnc, Min, Max  
Rating: 120 V AC/DC @ 80 mA (resistive load)  
ON resistance: ≤ 30 Ω  
Display mode status and operation status, amber ON or  
blink  
Permissible: 250 mW  
Engineering unit indication: Sticker label attached  
DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,  
kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,  
cm, mm, m, m/sec, mm/min, cm/min, m/min,  
INSTALLATION  
Power consumption  
AC:  
m/h, m/s2, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m3, m3/sec,  
Approx. 9 VA at 100 V  
Approx. 12 VA at 200 V  
Approx. 13 VA at 264 V  
DC: Approx. 5 W  
m
3
/min, m  
3
/h, Nm /h, N·m, N/m , g, kg, kg/h,  
3
2
N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,  
kJ, MJ, rpm, sec, min, min-1, pH, %, ppm, etc.  
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 2/7  
http://www.m-system.co.jp/  
MODEL: 47LLC  
Operating temperature: -10 to +55°C (14 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Panel flush mounting  
Weight: 300 g (0.66 lb)  
PERFORMANCE in percentage of max. span  
Accuracy  
Display: ±0.1 % ±1 digit  
Output: ±0.25 % (DC output = display + output)  
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)  
Input resolution: Max. 20 bits  
Output resolution: Max. 16 bits  
Response time: ≤ 0.5 sec.  
(alarm output: 0 – 100 % at 90 % setpoint)  
≤ 0.5 sec. (DC output: 0 – 90 %)  
Excitation: Set value ±250 mV  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @ 1 minute (strain gauge  
input or excitation or contact input or SG to DC output to HH  
output or H output to L output or LL output to power to  
ground)  
EXTERNAL VIEW  
(1) Main Display  
HH  
H
P
(2) Alarm Indicators  
L
LL  
Zro Spn D/P  
Tch Fnc Min Max  
(3) Function Indicators  
Max/Min  
Alarm/  
Scale/  
Shift  
Up  
(8) Up Button  
(7) Shift Button  
(6) Scale/ Button  
(4) Max/Min Button  
(5) Alarm/ Button  
• COMPONENT IDENTIFICATION  
No. COMPONENT  
(1) Main display  
FUNCTION  
Indicates present values, setting values and status of the unit.  
Indicate alarm status of the input signal.  
(2) Alarm indicators  
(3) Function indicators  
(4) Max/Min button  
Indicate the status in each setting mode.  
Used to switch the main display to show the present values, maximum values or minimum values etc.  
(5)  
Used to con!rm alarm setting value and to move on to the alarm and other setting modes; or to shift through  
setting items in each setting mode.  
Alarm/ button  
(6)  
Used to move on to the scaling and other setting modes; or to shift through setting items in each setting  
mode.  
Scale/ button  
(7) Shift button  
(8) Up button  
Used to move on to the setting standby status of each setting mode and shift through display digits in each  
setting item.  
Used to select setting values in each setting mode.  
Note: Refer to the operating manual for details on each function.  
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 3/7  
http://www.m-system.co.jp/  
MODEL: 47LLC  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
TOP VIEW  
95 (3.74)  
FRONT VIEW  
SIDE VIEW  
103 (4.06)  
96 (3.78)  
98.5 (3.88)  
86 (3.39)  
12.5 (.49)  
2 (.08)  
REAR VIEW  
20–M3 SCREW  
TERMINAL  
6.6 (.26)  
4–M3 SCREW  
1
2
3
4
5
6
7
8
9
10  
20  
11  
12  
13  
14  
15  
16  
17  
18  
19  
91.5 (3.60)  
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 4/7  
http://www.m-system.co.jp/  
MODEL: 47LLC  
MOUNTING REQUIREMENTS unit: mm  
92 +00.8  
min. 120  
Panel thickness: 1.6 to 8.0 mm  
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 5/7  
http://www.m-system.co.jp/  
MODEL: 47LLC  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
No alarm output  
Isolation  
STRAIN  
GAUGE  
Output  
Driver  
+
+
+
1
2
7
8
9
Low Drift  
Amplifier  
DC OUTPUT  
POWER  
INPUT  
EXC.  
3
U(+)  
Low Drift  
DC Volt.  
Stabilizer  
Digital  
Computation  
4
10 V(–)  
SG  
5
15  
16  
17  
18  
19  
20  
Display /  
Setting  
6
+
11  
12  
CONTACT  
INPUT (Di)  
13  
14  
N.O. Contact, 4 points / Photo MOSFET relay, 4 points  
Isolation  
STRAIN  
GAUGE  
Output  
Driver  
+
+
+
1
2
7
8
Low Drift  
Amplifier  
DC OUTPUT  
INPUT  
EXC.  
Ry  
Ry  
3
Low Drift  
DC Volt.  
Stabilizer  
Digital  
Computation  
15 HHa  
16 Ha  
4
HH OUTPUT  
H OUTPUT  
SG  
5
Display /  
Setting  
17 Hc, HHc  
Ry  
Ry  
6
18 La  
+
11  
12  
13  
14  
L OUTPUT  
CONTACT  
INPUT (Di)  
19 LLa  
LL OUTPUT  
20 Lc, LLc  
U(+)  
10 V(–)  
9
POWER  
SPDT contact, 2 points  
Isolation  
STRAIN  
GAUGE  
Output  
Driver  
+
+
+
1
2
7
8
Low Drift  
Amplifier  
DC OUTPUT  
INPUT  
EXC.  
Ry  
3
Low Drift  
DC Volt.  
Stabilizer  
Digital  
Computation  
15 Ha(NO)  
16 Hb(NC)  
4
H OUTPUT  
L OUTPUT  
SG  
5
Display /  
Setting  
17 Hc(COM  
18 La(NO)  
19 Lb(NC)  
)
Ry  
6
+
11  
12  
13  
14  
CONTACT  
INPUT (Di)  
20 Lc(COM  
U(+)  
10 V(–)  
)
9
POWER  
Relay Protection  
AC Powered  
Note: The section enclosed by broken line is only with  
DC output option.  
DC Powered  
Inductive  
Load (Coil)  
Inductive  
Load (Coil)  
Diode, Varistor or  
CR Circuit  
Varistor or  
CR Circuit  
LOAD  
LOAD  
U
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 6/7  
http://www.m-system.co.jp/  
MODEL: 47LLC  
Specifications are subject to change without notice.  
47LLC SPECIFICATIONS  
ES-9505 Rev.8 Page 7/7  
http://www.m-system.co.jp/  

47LLC-S240BG-M2/Q 相关器件

型号 制造商 描述 价格 文档
47LLC-S240BG-P MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240BG-P/Q MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240BG-R MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240BG-R/Q MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240G-M2 MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240G-M2/Q MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240G-P MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240G-P/Q MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240G-R MSYSTEM Digital Panel Meters 47 Series 获取价格
47LLC-S240G-R/Q MSYSTEM Digital Panel Meters 47 Series 获取价格

47LLC-S240BG-M2/Q 相关文章

  • 苹果Apple Intelligence适配百度AI模型遇技术挑战
    2024-12-05
    8
  • 苹果携手亚马逊,定制AI芯片助力Apple Intelligence模型训练
    2024-12-05
    7
  • 革命性突破:光衍射极限下微型步行机器人成功面世
    2024-12-05
    9
  • Soitec将为格罗方德9SW平台供应300mm RF-SOI晶圆
    2024-12-05
    7