KWYPD-D4M211N-R

更新时间:2024-11-30 22:33:14
品牌:MSYSTEM
描述:Plug-in Signal Conditioners K-UNIT

KWYPD-D4M211N-R 概述

Plug-in Signal Conditioners K-UNIT

KWYPD-D4M211N-R 数据手册

通过下载KWYPD-D4M211N-R数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
MODEL: KWYPD  
Plug-in Signal Conditioners K-UNIT  
[3] OUTPUT 1  
A1: Open collector (max. frequency 100 kHz)  
A2: Open collector (max. frequency 10 Hz)  
M1: 5 V pulse (max. frequency 100 kHz)  
M2: 5 V pulse (max. frequency 10 Hz)  
N1: 12 V pulse (max. frequency 100 kHz)  
N2: 12 V pulse (max. frequency 10 Hz)  
H: Relay contact (max. frequency 0.5 Hz)  
PULSE ISOLATOR  
(two isolated outputs; built-in excitation)  
Functions & Features  
• Galvanically isolating pulse rate signals  
• Input frequency = output frequency  
• Various outputs (relay, open collector and voltage pulses)  
• Excitation  
• Isolation up to 2000 V AC  
[4] OUTPUT 2  
• High-density mounting  
Same range availability as Output 1  
(Choose a combination of output 1 and 2 with same max.  
frequency limit. Output logic of open collector is reversed  
when open collector and others are mixed.)  
Typical Applications  
• Isolating field pulse signals in order to reduce noises  
• Changing e.g. dry contact signal to e.g. 5 V signals  
[5] OUTPUT PULSE WIDTH  
1: Equal to the input  
50  
(1.97)  
2: One-shot output (≤ 30 ms; std. pulse width 5 ms)  
(Specify when optional pulse width is required.)  
(10 ms for relay contact pulse)  
80  
(3.15)  
3: One-shot output (≥ 30 ms; std. pulse width 50 ms)  
(Specify when optional pulse width is required.)  
132  
(5.20)  
[6] OUTPUT LOGIC  
N: The same as the input  
R: Inverted  
mm (inch)  
MODEL: KWYPD–[1][2][3][4][5][6]–[7][8]  
[7] POWER INPUT  
AC Power  
ORDERING INFORMATION  
B: 100 V AC  
C: 110 V AC  
D: 115 V AC  
F: 120 V AC  
G: 200 V AC  
H: 220 V AC  
J: 240 V AC  
• Code number: KWYPD-[1][2][3][4][5][6]-[7][8]  
Specify a code from below for each of [1] through [8].  
(e.g. KWYPD-D4A2M23N-B/Q)  
• Frequency range (e.g. 0 – 5 Hz)  
• Use Ordering Information Sheet (No. ESU-2276) for pulse  
width settings of DC voltage pulse input or one-shot output.  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
DC Power  
S: 12 V DC  
R: 24 V DC  
[1] INPUT  
A: Dry contact  
[8] OPTIONS  
blank: none  
B: DC voltage pulse (Specify sensitivity)  
C: 5 V pulse (sensitivity 2 V)  
D: 12 V/24 V pulse (sensitivity 5 V)  
H: Two-wire current pulse  
/Q: With options (specify the specification)  
[2] EXCITATION  
1: 5 V DC / 80 mA  
4: 12 V DC / 40 mA  
KWYPD SPECIFICATIONS  
ES-3577 Rev.14 Page 1/6  
http://www.m-system.co.jp/  
MODEL: KWYPD  
for output code A2, M2, N2, H)  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
Input resistance: Receiving resistor 220 Ω  
Maximum current: ± 50 mA  
Hi/Lo level: ≤ 5 mA for Lo, ≥ 15 mA for Hi  
Voltage pulse waveform  
/C02: Polyurethane coating  
/C03: Rubber coating  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
Volts  
50V max.  
Amplitude  
Vinp-p  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
DC Offset  
Connection: M3.5 screw terminals  
t
Screw terminal: Chromated steel (standard) or stainless  
steel  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output 1 to output 2 to power  
Excitation adjustment: 5 – 12 V DC  
Detecting level adjustments (DC voltage pulse): 2 – 10 V  
Input pulse sensing: DC coupled  
OUTPUT SPECIFICATIONS  
Open Collector: 50 V DC @ 50 mA (resistive load)  
Maximum frequency:  
Output code A1: 100 kHz with load resistance ≤ 1 kΩ  
OUtput code A2: 10 Hz with load resistance ≤ 1 kΩ  
Saturation voltage: 0.5 V DC  
Input filter: Provided with output code A2, M2, N2, H  
(time constant approx. 1 msec.)  
Voltage Pulse: Rating (5 or 12 V) ± 10 %  
Maximum frequency: 100 kHz  
Load resistance: 1.5 kΩ min. for 5 V, 3 kΩ min. for 12 V  
L level: ≤ 0.5 V  
INPUT SPECIFICATIONS  
Excitation: Shortcircuit protection; approx. 150 mA at  
shortcircuit  
Relay Contact: 120 V AC or 30 V DC @ 200 mA  
(resistive load)  
Dry Contact  
Maximum switching voltage: 250 V AC or 30 V DC  
Maximum switching power: 50 VA or 6 W  
Minimum load: 5 V DC @ 10 mA  
Max. frequency: 100 kHz  
Pulse width time requirement: 5 μsec. min. (10 ms  
for output code A2, M2, N2, H)  
Sensing: 10 V DC @ 2.5 mA  
Maximum frequency: 0.5 Hz  
Relay life:  
ON/OFF level:  
2 × 10  
7
cycles (mechanical)  
cycles (electrical)  
≥ 5.5 kΩ /5.5 V for OFF  
7 × 10  
6
≤ 1.8 kΩ /4.5 V for ON  
Voltage Pulse: Specify DC offset and amplitude.  
Max. frequency: 100 kHz  
OUTPUT PULSE WIDTH  
Pulse width time requirement: 5 μsec. min. (10 ms  
for output code A2, M2, N2, H)  
Waveform: Square or sine  
Equal to the Input: No pulse width conversion  
(difference between input and output within ±10 μsec.)  
One-shot Output: Constant pulse width  
Output Frequency (Hz) = 500 / (Output Pulse Width (msec.))  
Adjustable pulse width  
Input impedance: 10 kΩ min.  
Input amplitude: 2 – 50 Vp-p  
Sensitivity adjustment (threshold level): 2 – 10 V  
Max. voltage between input terminals: 50 V  
• 5V, 12V, 24V Pulse  
Pulse width max. 30 msec. (code 2):  
1 – 30 msec. adjustable (standard 5 msec. ±20 %) for  
'Output' code other than 'H'  
Waveform: Square or sine  
10 – 30 msec. adjustable (standard 10 msec. ±20 %) for  
'Output' code 'H'  
Input impedance: 10 kΩ min.  
Detecting level  
Pulse width min. 30 msec. (code 3): 30 msec. – 1 sec.  
adjustable (standard 50 msec. ±20 %)  
INPUT 5 V PULSE 12 V / 24 V PULSE  
V
H
≥ 2.25 V  
≤ 1.75 V  
≥ 5.25 V  
≤ 4.75 V  
VL  
Two-wire Current Pulse  
Max. frequency: 100 kHz  
Pulse width time requirement: 5 μsec. min. (10 ms  
KWYPD SPECIFICATIONS  
ES-3577 Rev.14 Page 2/6  
http://www.m-system.co.jp/  
MODEL: KWYPD  
INSTALLATION  
Power input  
AC: Operational voltage range: rating ±10 %,  
50/60 ± 2 Hz, approx. 2.5 VA  
DC: Operational voltage range: rating ±10 %,  
ripple 10 %p-p max., approx. 2 W (80 mA at 24 V)  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Weight: 400 g (0.88 lb)  
PERFORMANCE  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength:  
2000 V AC @1 minute (input to output 1 or output 2 to  
power to ground)  
1000 V AC @1 minute (output 1 to output 2)  
EXTERNAL VIEW  
Excitation Adj.  
Sensitivity Adj.  
Pulse Width Adj.  
KWYPD SPECIFICATIONS  
ES-3577 Rev.14 Page 3/6  
http://www.m-system.co.jp/  
MODEL: KWYPD  
OUTPUT LOGIC  
VOLTAGE PULSE or  
INPUT WAVEFORM  
DRY CONTACT  
OFF  
2-WIRE CURRENT PULSE  
H
OUTPUT WAVEFORM  
L
ON  
H
H
Voltage pulse  
L
L
No pulse width conversion  
OFF  
OFF  
Open collector  
or relay contact  
ON  
H
ON  
H
One-shot, detecting  
input pulse rise  
Voltage pulse  
L
L
NON INVERTED  
OFF  
OFF  
Open collector  
or relay contact  
ON  
H
ON  
H
One-shot, detecting  
input pulse sink  
Voltage pulse  
L
L
OFF  
OFF  
Open collector  
or relay contact  
ON  
H
ON  
H
Voltage pulse  
L
L
No pulse width conversion  
OFF  
OFF  
Open collector  
or relay contact  
ON  
H
ON  
H
One-shot, detecting  
input pulse rise  
Voltage pulse  
L
L
INVERTED  
OFF  
OFF  
Open collector  
or relay contact  
ON  
H
ON  
H
One-shot, detecting  
input pulse sink  
Voltage pulse  
L
L
OFF  
OFF  
Open collector  
or relay contact  
ON  
ON  
The pulse width in one-shot means the bold lined section of a pulse waveform.  
Shades indicate default setting.  
Input pulse rise/sink detected with voltage level  
KWYPD SPECIFICATIONS  
ES-3577 Rev.14 Page 4/6  
http://www.m-system.co.jp/  
MODEL: KWYPD  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
CLAMP  
(top & bottom)  
7.8 (.31)  
DIN RAIL  
35mm wide  
8
7
6
5
4
2
4.5 (.18) dia.  
MTG HOLE  
25 (.98) deep  
9
3
2
10 11  
1
11  
M3.5  
SCREW  
50 (1.97)  
103 (4.06)  
132 (5.20)  
40 (1.57)  
50 (1.97)  
[3.3 (.13)]  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
SENSITIVITY  
PULTH WIDTH  
Isolation  
Waveform  
Shaper  
Output  
Driver  
One-Shot *  
+
+
5
6
4
3
9
1
2
+
OUTPUT 1  
INPUT  
SENSOR EXCITATION  
Excitation  
Supply  
Output  
Driver  
10  
11  
7
+
OUTPUT 2  
POWER  
EXCITATION  
U(+)  
V(–)  
8
Base Socket  
*Disregard one-shot circuit for output pulse width code “1”.  
Input Connection Examples  
Output Connection Examples  
Open Collector  
Dry Contact  
2-Wire Current Pulse  
• Built-in Excitation  
Voltage Pulse  
+10V  
4kΩ  
220Ω  
+
5
6
4
+
5
6
4
1
2
+
+
1
2
+
+
2-WIRE  
PICK-UP  
PWR  
+
Vsns  
Vsns  
Relay Contact  
• AC Powered  
• External DC Supply  
Voltage Pulse  
Relay or  
Counter Coil  
1
2
10kΩ  
220Ω  
Varistor or Spark  
Quenching Circuit  
+
+
5
+
5
6
4
LOAD  
2-WIRE  
PICK-UP  
6
4
U
DC SUPPLY  
Vsns  
Vsns  
• DC Powered  
+
PWR  
Relay or  
Counter Coil  
1
2
Spark Quenching  
Diode  
LOAD  
KWYPD SPECIFICATIONS  
ES-3577 Rev.14 Page 5/6  
http://www.m-system.co.jp/  
MODEL: KWYPD  
Specifications are subject to change without notice.  
KWYPD SPECIFICATIONS  
ES-3577 Rev.14 Page 6/6  
http://www.m-system.co.jp/  

KWYPD-D4M211N-R 相关器件

型号 制造商 描述 价格 文档
KWYPD-D4M211N-R/Q MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211N-S MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211N-S/Q MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-B MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-B/Q MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-C MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-C/Q MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-D MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-D/Q MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格
KWYPD-D4M211R-R MSYSTEM Plug-in Signal Conditioners K-UNIT 获取价格

KWYPD-D4M211N-R 相关文章

  • 三星大幅削减3D NAND生产中光刻胶用量,供应商面临挑战
    2024-12-03
    4
  • 英伟达GB200芯片量产时间推迟,微软削减40%订单
    2024-12-03
    7
  • 苹果有望2026年下半年推出折叠iPhone,重振折叠屏手机市场
    2024-12-03
    6
  • 英伟达GB300被曝将于明年登场:全水冷方案引领AI算力新飞跃
    2024-12-03
    7