首页 > SF06R1801DTLA

SF06R1801DTLA

更新时间：2025-07-01 08:45:50
品牌：WALSIN
描述：Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 1800Ω, ±0.5%, ≦±25, 1/10W

PDF下载

中文翻译

免费 PCB/SMT

SF06R1801DTLA 概述

Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 1800Ω, ±0.5%, ≦±25, 1/10W

SF06R1801DTLA 数据手册

通过下载SF06R1801DTLA数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Approval sheet  
SF25Q&R_A, SF20Q&R _A, SF10Q&R_A,  
SF12Q&R_A, SF08Q&R_A, SF06Q&R_A,  
SF04Q&R_A  
ê1.0%, ê0.5%, ê0.25%, ê0.1%, ê0.05%  
TC50 , TC25  
High Precision Power Thin Film chip  
resistors  
Size: 2512,2010,1210,1206,0805,0603,0402  
(Anti-Sulfuration )  
*Contents in this sheet are subject to change without prior notice.  
Page 1 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
FEATURE  
1. SMD metal film resistor  
2. High reliability and stability of 0.5% and below per customer request  
3. High performance of TCR: 50 25 ppm/K and below per customer request  
4. Low current noise  
5. Sulfuration resistant Oil 105’C +3.5% Sulfur powder x 500hrs  
6. RoHS compliant and Lead free products  
APPLICATION  
ñ
ñ
ñ
ñ
ñ
Medical equipment  
Measuring instrument  
Communication device  
Computer  
Printer  
DESCRIPTION  
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are  
added at each end and connected by a resistive layer that is applied to the top surface of the substrate. The  
composition of the resistive layer is adjusted to give the approximate resistance required and the value is  
trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer.  
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For  
environmental soldering issue, the outer layer of these end terminations is a Lead-free solder .  
Fig 1. Construction of Chip-R SFxxQ&R_A  
Page 2 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
QUICK REFERENCE DATA  
Item  
General Specification  
SF25Q&R  
SF20Q&R  
_A  
SF10Q&R  
SF12Q&R  
_A  
SF08Q&R  
SF06Q&R  
_A  
SF04Q&R  
_A  
Series No.  
Size Code  
_A  
_A  
_A  
2512  
(6432)  
2010  
1210  
(3225)  
1206  
0805  
0603  
0402  
(5025)  
( 3216 )  
( 2012 )  
( 1608 )  
( 1005 )  
Resistance Tolerance  
Resistance Range  
ê1.0%, ê0.5%, ê0.25%, ê0.1%, ê0.05%  
4.7W ~  
3MW  
4.7W ~  
2.5MW  
1W ~  
2.5MW  
4.7W ~  
2MW  
4.7W ~  
1MW  
10W  
~255KW  
1W ~ 3MW  
TCR  
ê50 & 25 ppm/èC  
1W  
3/4W  
2/5W  
1/4W  
1/8W  
1/10W  
1/10W  
Max. Dissipation at Tamb=70èC  
Max. Operating Voltage  
Max. Overload Voltage  
200V  
400V  
200V  
400V  
200V  
400V  
200V  
400V  
150V  
300V  
75V  
50V  
150V  
100V  
Operating Temperature Range  
- 55~ +155èC  
Note :  
1.  
This is the maximum voltage that may be continuously supplied to the resistor element, see “IEC publication  
60115-8”  
2.  
Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by  
RCWV = RatedPower ìResistance Value or Max. RCWV listed above, whichever is lower.  
Tolerance : ê0.01% is upon requested  
3.  
DIMENSIONS: (unit:mm)  
SF25  
SF20  
SF10  
SF12  
SF08  
SF06  
SF04  
Type  
6.35 ê 0.10  
3.20 ê 0.15  
0.60 ê 0.20  
0.90 ê 0.25  
0.55 ê 0.10  
5.00 ê 0.10  
2.50 ê 0.15  
0.60 ê 0.20  
0.60 ê 0.25  
0.55 ê 0.10  
3.10 ê 0.10  
2.60 ê 0.15  
0.50 ê 0.20  
0.50 ê 0.20  
0.55 ê 0.10  
3.05 ê 0.15  
1.55 ê 0.15  
0.40 ê 0.20  
0.40 ê 0.20  
0.55 ê 0.15  
2.00 ê 0.10  
1.25 ê 0.10  
0.25 ê 0.20  
0.40 ê 0.20  
0.50 ê 0.15  
1.55 ê 0.10  
0.80 ê 0.10  
0.30 ê 0.15  
0.30 ê 0.15  
0.45 ê 0.15  
1.00 ê 0.10  
0.50 ê 0.05  
0.30 ê 0.15  
0.30 ê 0.15  
0.35 ê 0.05  
L
W
A
B
t
Protective coat  
t
End termination  
B
A
Resistive layer  
Ceramic Substrate  
1001  
T
W
L
Page 3 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
MARKING  
ò
3-digits marking for 0603 size  
SFxxR_A has same marking rule as WRxx ±1%.  
3-digits marking ê1% : 0603  
Nominal resistance  
Description  
1.E-24 series  
2.E-96 series  
As 0603 WR06X ê5%.  
The 1st two digit codes are referring to the CODE on the table, the 3rd code is the index of resistance  
value :  
Y=10-2 X=10-1 A=100 B=101 C=102 D=103 E=104 F=105  
EX :  
17.8 =25X 178 =25A 1K78 =25B  
17K8=25C 178K=25D 1M78=25E  
3. Remark  
There is no marking for the items are not under E-24 and E-96 series  
CODE R_value CODE R_value CODE R_Value CODE R_value CODE R_value CODE R_value CODE R_value CODE R_value  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
100  
102  
105  
107  
110  
113  
115  
118  
121  
124  
127  
130  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
133  
137  
140  
143  
147  
150  
154  
158  
162  
165  
169  
174  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
178  
182  
187  
191  
196  
200  
205  
210  
215  
221  
226  
232  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
237  
243  
249  
255  
261  
267  
274  
280  
287  
294  
301  
309  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
316  
324  
332  
340  
348  
357  
365  
374  
383  
392  
402  
412  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
422  
432  
442  
453  
464  
475  
487  
499  
511  
523  
536  
549  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
562  
576  
590  
604  
619  
634  
649  
665  
681  
698  
715  
732  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
750  
768  
787  
806  
825  
845  
866  
887  
909  
931  
953  
976  
ò
4-digits marking for 2512, 2010, 1210, 1206, 0805 size  
For E24+E96, each resistor is marked with a four digits code on the protective coating to designate the  
nominal resistance value. For values below 97W6 the R is used as a digit. For values of 100W or greater, the  
first 3 digits are significant, the fourth digit indicates the number of multiple to follow.  
Example  
RESISTANCE  
10W  
12W  
100W  
6800W  
47000W  
10R0  
12R0  
1000  
6801  
4702  
4-digits marking  
ò
No marking code for 0402 size  
Page 4 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
FUNCTIONAL DESCRIPTION  
Product characterization  
Standard values of nominal resistance are taken from the E192 & E24 series for resistors with a tolerance of  
ê0.5%, ê0.25%, ê0.1%. The values of the E24/E192 series are in accordance with “IEC publication 60063”  
Derating  
The power that the resistor can dissipate depends on the operating temperature; see Fig.2  
MOUNTING  
Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by  
automatic placement systems.  
Chip placement can be on ceramic substrates and printed-circuit boards (PCBs).  
Electrical connection to the circuit is by individual soldering condition.  
The end terminations guarantee a reliable contact.  
Page 5 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
SOLDERING CONDITION  
The robust construction of chip resistors allows them to be completely immersed in a solder bath of 260èC for 10  
seconds. Therefore, it is possible to mount Surface Mount Resistors on one side of a PCB and other discrete  
components on the reverse (mixed PCBs).  
Surface Mount Resistors are tested for solderability at 235èC during 2 seconds within lead-free solder bath. The  
test condition for no leaching is 260èC for 30 seconds. Typical examples of soldering processes that provide  
reliable joints without any damage are given in Fig 3. and Table 1.  
Fig. 3 Infrared soldering profile for Chip Resistors  
Table 1. Infrared soldering condition for Chip Resistors  
Temperature Condition  
Average ramp-up rate (217èC to 260èC)  
Between 150 and 200èC  
> 217èC  
Exposure Time  
Less than 3èC/second  
Between 60-120 seconds  
Between 60-150 seconds  
260ºC +0/-5èC  
Peak Temperature  
Min. 30 seconds  
Time within 245èC  
Ramp-down rate (Peak to 217èC)  
Time from 25èC to Peak  
Less than 6èC/second  
No greater than 480 seconds  
Page 6 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
CATALOGUES NUMBERS  
The resistors have a catalogue number starting with .  
SF04  
Q/R  
xxxx  
D
T
L
A
Special code  
Packaging  
code  
Termination  
code  
Size code Type code Resistance code  
Tolerance  
F : ê1.0%  
D : ê0.5%  
C: ê0.25%  
B : ê0.1%  
A : ê0.05%  
Q: TCR=50ppm  
R: TCR=25ppm  
( High power)  
SF25: 2512  
SF20: 2010  
SF10: 1210  
SF12: 1206  
SF08: 0805  
SF06: 0603  
SF04: 0402  
E192+E24:  
A = Antisulfur  
Under Oil  
105’C+3.5%  
Sulfur powder  
500hrs  
T:Taped & Reeled L= Sn base  
(lead free)  
3 significant digits  
followed by no. of zeros  
102W  
37.4KW =3742  
220W =2200  
=1020  
* Anti-Sulfur test conditions: Oil 105’C, 3.5% Sulfur powder, 500hrs, acceptance criteria: +/-1.0%  
1. Reeled tape packaging: 8mm width paper taping.  
5,000pcs/reel for SF10, SF12, SF08, SF06  
10,000pcs/reel for SF04  
2. Reeled tape packaging: 12mm width paper taping  
4,000pcs/reel for SF25, SF20  
Page 7 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
TEST AND REQUIREMENTS(JIS C 5201-1 : 1998)  
REQUIREMENT  
Resistor  
TEST  
PROCEDURE  
DC resistance  
DC resistance values measured at the test voltages specified below :  
Within the specified tolerance  
Clause 4.5  
Natural resistance change per change in degree centigrade.  
R2 - R  
ì106 (ppm/èC)  
1
Temperature Coefficient  
of Resistance(T.C.R)  
R t2 - t1  
Refer  
to  
1
“QUICK REFERENCE DATA”  
R1 : Resistance at reference temperature  
R2 : Resistance at test temperature  
t1 : 20°C+5°C-1°C  
Clause 4.8  
Short  
time  
overload  
Permanent resistance change after a 5second application of a voltage  
(S.T.O.L)  
2.5 times RCWV or the maximum overload voltage specified in the DR/R max. ±(0.2%+0.05W)  
above list, whichever is less.  
Clause 4.13  
Resistance to soldering  
heat(R.S.H)  
Clause 4.18  
no visible damage  
Un-mounted chips completely immersed for 10±1second in a SAC  
solder bath at 260 ±5ºC  
D R/R max. ±(0.25%+0.05W)  
good tinning (>95% covered)  
Solderability  
Un-mounted chips completely immersed for 2±0.5 second in a SAC  
solder bath at 235 ±5  
no visible damage  
Clause 4.17  
30 minutes at -55èCê3èC, 2~3 minutes at 20°C+5°C/-1°C, 30 minutes  
at +125èCê3èC, 2~3 minutes at 20°C+5°C/-1°C, total 5 continuous  
cycles  
no visible damage  
Temperature cycling  
Clause 4.19  
DR/R max. ±(0.5%+0.05W)  
Load life (endurance)  
1000 +48/-0 hours, loaded with RCWV or Vmax in chamber controller  
70±2ºC, 1.5 hours on and 0.5 hours off  
DR/R max. ê(0.5%+0.05W)  
DR/R max. ê(0.5%+0.05W)  
DR/R max. ±(0.1%+0.05W)  
Clause 4.25  
1000 +48/-0 hours, loaded with RCWV or Vmax in humidity chamber  
controller at 40èCê2èC and 90~95% relative humidity, 1.5hours on and  
0.5 hours off  
Humidity  
Clause 4.24  
Bending strength  
Clause 4.33  
Adhesion  
Resistors mounted on a 90mm glass epoxy resin PCB(FR4); bending :  
3 mm, once for 10 seconds.  
No remarkable damage or  
removal of the terminations.  
Pressurizing force: 5N, Test time: 10±1sec.  
Clause 4.32  
Insulation Resistance  
R
10GΩ  
Apply the maximum overload voltage (DC) for 1minute  
Clause 4.6  
Dielectric  
Withstand  
Voltage  
Apply the maximum overload voltage (AC) for 1 minute  
No breakdown or flashover  
Clause 4.7  
Soaked in industrial oil with 3.5% sulfur concentration 105°C ± 3°C,  
500 hours  
Sulfuration Test  
DR/R max. ±(1%+0.1W)  
Page 8 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
PACKAGING  
Paper Tape specifications (unit :mm)  
P0  
F
D
Series No.  
SF25  
A
B
W
D
E
6.90±0.20  
5.50±0.20  
3.60±0.20  
3.60±0.20  
2.40±0.20  
1.90±0.20  
1.20±0.10  
3.60±0.20  
2.80±0.20  
2.00±0.20  
3.00±0.20  
1.65±0.20  
1.10±0.20  
0.7±0.10  
12.00±0.30  
12.00±0.30  
8.00±0.30  
8.00±0.30  
8.00±0.30  
8.00±0.30  
8.00±0.20  
5.50±0.10  
5.50±0.10  
3.50±0.20  
3.50±0.20  
3.50±0.20  
3.50±0.20  
3.50±0.05  
1.75±0.10  
1.75±0.10  
1.75±0.10  
1.75±0.10  
1.75±0.10  
1.75±0.10  
1.75±0.10  
SF20  
SF12  
SF10  
SF08  
SF06  
SF04  
Series No.  
SF12  
F
P0  
T
FD  
+0.1  
4.00±0.10  
4.00±0.10  
Max. 1.0  
F1.50  
-0.0  
+0.1  
SF25  
SF20  
SF10  
SF08  
SF06  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
4.00±0.10  
Max 1.2  
Max 1.2  
Max. 1.0  
Max. 1.0  
0.65±0.05  
F1.50  
-0.0  
+0.1  
-0.0  
F1.50  
+0.1  
-0.0  
F1.50  
+0.1  
-0.0  
F1.50  
+0.1  
-0.0  
F1.50  
+0.1  
-0.0  
2.00±0.10  
4.00±0.10  
0.40±0.05  
SF04  
F1.50  
Page 9 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  
Approval sheet  
Reel dimensions  
B
A
C
D
SF25 , SF20  
Symbol  
A
B
C
D
(unit : mm)  
13.0±0.2  
14.0±0.5  
F178.0±2.0  
F60.0±1.0  
SF12 , SF10 , SF08 , SF06 , SF04  
Symbol  
A
B
C
D
(unit : mm)  
13.0±0.2  
9.0±0.5  
F178.0±2.0  
F60.0±1.0  
SF02  
Symbol  
A
B
C
D
+0.0  
-1.5  
+0.0  
-1.5  
+1.0  
-0.0  
13.0±0.2  
(unit : mm)  
F180  
F60  
F9  
Taping quantity  
-
-
-
Chip resistors 4,000 pcs per reel ( SF25, SF20 )  
Chip resistors 5,000 pcs per reel ( SF10, SF12, SF08, SF06 )  
Chip resistors 10,000 pcs per reel ( SF04 )  
Page 10 of 10  
ASC_SFxxQ&R_A_V02  
MAY - 2018  

SF06R1801DTLA 相关器件

型号 制造商 描述 价格 文档
SF06R1801DTLQ WALSIN Anti-Sulfuration & AEC-Q200 Thin Film Chip Resistor /SF.Q Series 1800Ω, ±0.5%, ≦±25, 1/10W 获取价格
SF06R1801FTLA WALSIN Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 1800Ω, ±1%, ≦±25, 1/10W 获取价格
SF06R1801FTLQ WALSIN Anti-Sulfuration & AEC-Q200 Thin Film Chip Resistor /SF.Q Series 1800Ω, ±1%, ≦±25, 1/10W 获取价格
SF06R1802ATLA WALSIN Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 18000Ω, ±0.05%, ≦±25, 1/10W 获取价格
SF06R1802ATLQ WALSIN Anti-Sulfuration & AEC-Q200 Thin Film Chip Resistor /SF.Q Series 18000Ω, ±0.05%, ≦±25, 1/10W 获取价格
SF06R1802BTLA WALSIN Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 18000Ω, ±0.1%, ≦±25, 1/10W 获取价格
SF06R1802BTLQ WALSIN Anti-Sulfuration & AEC-Q200 Thin Film Chip Resistor /SF.Q Series 18000Ω, ±0.1%, ≦±25, 1/10W 获取价格
SF06R1802CTLA WALSIN Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 18000Ω, ±0.25%, ≦±25, 1/10W 获取价格
SF06R1802CTLQ WALSIN Anti-Sulfuration & AEC-Q200 Thin Film Chip Resistor /SF.Q Series 18000Ω, ±0.25%, ≦±25, 1/10W 获取价格
SF06R1802DTLA WALSIN Anti-Sulfuration Thin Film Chip Resistor /SF.A Series 18000Ω, ±0.5%, ≦±25, 1/10W 获取价格

SF06R1801DTLA 相关文章

  • 震惊！英特尔 18A 制程对外代工或终止，聚焦 14A 工艺
    2025-07-03
    3
  • 南芯科技：电源到车身控制，车规核心场景的突破秘诀
    2025-07-03
    9
  • 一文搞懂运算放大器和比较器的本质区别
    2025-07-03
    10
  • 三星 HBM3E 产量调整，市场需求不明下的保守抉择
    2025-07-03
    12

    • 热门型号

  • 1N5930
  • 1N5942B
  • 1N4001
  • MBR3050CT
  • RTA02-8D
  • 4116T
  • 5KP43A/4
  • 1N5260A
  • MC79L05
  • BZX85C30
  • 9510-G
  • W2PE-54WZ-P
  • 1N6063
  • 2SA673
  • 20IMX35
    • Hi,有什么可以帮您？ 在线客服 或 微信扫码咨询
  • 概述
  • 数据手册
    • 2025 ICPDF网 联系我们和版权申明:QQ 272164286