AMEQR70N-50140Z [AIMTEC]

up to 1400mA | AC-DC LED driver;
AMEQR70N-50140Z
型号: AMEQR70N-50140Z
厂家: AIMTEC    AIMTEC
描述:

up to 1400mA | AC-DC LED driver

文件: 总4页 (文件大小:419K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Series AMEQR70N-Z  
up to 1400mA | AC-DC LED driver  
FEATURES:  
Universal Input: 90~305 Vac  
High Efficiency: Up to 88%  
Active Power Factor Correction  
Short Circuit / Open Circuit Protection  
IP65/67 Design for outdoor application  
Long Life, High reliability  
Ultra-low ripple without flickering  
5-year limited warranty  
Models  
Single output  
Max Output  
Power (W)  
70  
Output Voltage  
Range (V)  
36-50  
Output Current  
(mA)  
1400  
Input Voltage  
(VAC/Hz)  
90-305/47-63  
Efficiency  
(%)  
Model  
AMEQR70N-50140Z  
88.0  
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity <75%, nominal input voltage and at  
rated output load unless otherwise specified.  
Input Specifications  
Parameters  
Input Current  
Conditions  
Typical  
Maximum  
1.05  
40  
Units  
Arms  
90 VAC, full load  
115 VAC, cold start  
230 VAC, cold start  
Inrush current <2ms  
Leakage current  
Input dissipation  
A
60  
0.75  
1.5  
mA  
W
W
No Load  
Output Short  
4.5  
115 VAC, full load  
230 VAC, full load  
0.98  
0.95  
Power Factor  
Input Fuse  
3.15A / 300V  
115 VAC, full load  
230 VAC, full load  
1.5  
1.0  
Sec.  
Sec.  
Start-up Time  
Output Specifications  
Parameters  
Current accuracy  
Line regulation  
Conditions  
Typical  
Maximum  
Units  
%
%
±5  
±3  
±5  
LL to HL  
Full Output Voltage Range  
Load regulation  
%
Ripple & Noise  
Output Current Ripple  
200  
100  
mV p-p  
mA  
Full load  
LL to HL, full load at cold start,  
% of rated output current  
Current Overshoot  
15  
%
Hold-up time (min)  
0.5  
ms  
Minimum Load Voltage  
See Models Table Above  
Isolation Specifications  
Parameters  
Conditions  
I/P O/P  
I/P FG  
O/P FG  
500Vdc  
Typical  
Rated  
3750  
2000  
500  
Units  
VAC  
VAC  
VAC  
Tested I/O voltage  
Isolation Resistance  
Isolation Capacitance  
>100  
MΩ  
pF  
3000  
General Specifications  
Parameters  
Switching frequency  
Over voltage protection  
Short circuit protection  
Conditions  
Typical  
Maximum  
Units  
KHz  
V
150  
63  
Continuous, Hiccup Mode  
www.aimtec.com  
F 052.1e R0  
Tel: +1 514 620 2722  
1 of 4  
Toll free: + 1 888 9 AIMTEC (924 6832)  
North America only  
Series AMEQR70N-Z  
up to 1400mA | AC-DC LED driver  
Short circuit restart  
Open circuit protection  
Operating temperature  
Maximum case temperature  
Storage temperature  
Temperature coefficient  
Cooling  
Humidity  
Case material  
Potting material  
IP Rating  
Weight  
Auto Recovery  
Continuous, Hiccup Mode  
Without Derating  
-40 to +60  
90  
-40 to +90  
oC  
oC  
oC  
0.03  
90  
% / oC  
Free Air Convection  
% RH  
g
Metal (Aluminum)  
polysiloxane  
IP67  
750  
Dimensions (L X W X H)  
MTBF  
124.0 x 90.6 x 44.5 mm 4.88 x 3.57 x 1.75 inches  
>400,000 hrs (MIL-HDBK-217F at +25°C)  
Safety Specifications  
Parameters  
Electromagnetic Interference  
Harmonic Current Emissions  
EN55015 / FCC Part 15, Class B  
EN61000-3-2, Class B  
EN61000-3-3  
EN61000-4-2, 8kV Air, 4kV Contact, Level 3, Criteria A  
EN61000-4-3, Test-RS Level 3, Criteria A  
EN61000-4-4, Burst EFT Level 3, Criteria A  
EN61000-4-5, Line to Neutral 4kV, Neutral to FG 6kV  
EN61000-4-6. Test-CS Level 3, Criteria A  
EN61000-4-8, Test 3A/m, Criteria A  
Voltage fluctuations and flicker  
Electrostatic Discharge Immunity  
RF, Electromagnetic Field Immunity  
Electrical Fast Transient / Burst Immunity  
Surge Immunity  
RF, Conducted Disturbance Immunity  
Power frequency Magnetic Field Immunity  
Voltage dips, Short Interruptions Immunity  
Standards  
EN61000-4-11, Criteria B  
Electromagnetic Immunity Requirements Applies EN61547  
to Lighting Equipment  
Pin Definition  
Application circuit  
Wire  
Blue  
Brown  
Pin  
AC N  
AC L  
FG  
+V Output  
-V Output  
AC_L  
LED+  
LED-  
Yellow/Green  
Red  
FG  
AC  
Black  
AC_N  
Input Wire specifications: H05RN-F 0.75mm2  
Output Wire specifications: H05RN-F 1.0mm2  
www.aimtec.com  
F 052.1e R0  
Tel: +1 514 620 2722  
2 of 4  
Toll free: + 1 888 9 AIMTEC (924 6832)  
North America only  
Series AMEQR70N-Z  
up to 1400mA | AC-DC LED driver  
Dimensions  
Left View  
Top View  
44.5±0.3  
1.75±0.01  
90.0±0.30  
17.0  
17.0  
0.67  
3.54±0.01  
0.67  
20.0  
0.79  
45.3  
1.78  
90.6±0.30  
3.57±0.01  
260±20  
10.24±0.08  
8.00  
0.31  
5.0±1.0  
0.20±0.04  
5.00  
0.20  
7.70  
0.30  
45.3  
1.78  
R5.00X4  
0.20X4  
Side View  
44.5±0.30  
1.75±0.01  
Efficiency Vs. Input Voltage & Output Voltage  
AMEQR70N-50140Z  
95.00%  
90.00%  
85.00%  
80.00%  
75.00%  
70.00%  
65.00%  
115 VAC  
230 VAC  
277 VAC  
36  
38  
40  
42  
44  
46  
48  
50  
Output Voltage(V)  
www.aimtec.com  
F 052.1e R0  
Tel: +1 514 620 2722  
3 of 4  
Toll free: + 1 888 9 AIMTEC (924 6832)  
North America only  
Series AMEQR70N-Z  
up to 1400mA | AC-DC LED driver  
PF vs. Input Voltage & Output Voltage  
AMEQR70N-50140Z  
1.200  
0.900  
0.600  
0.300  
0.000  
115 VAC  
230 VAC  
277 VAC  
36  
38  
40  
42  
44  
46  
48  
50  
Output Voltage(V)  
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled  
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the  
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,  
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components  
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This  
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate  
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.  
www.aimtec.com  
F 052.1e R0  
Tel: +1 514 620 2722  
4 of 4  
Toll free: + 1 888 9 AIMTEC (924 6832)  
North America only  

相关型号:

AMEQR70N-Z

up to 1400mA | AC-DC LED driver
AIMTEC

AMER120-24500AZ

up to 5A | AC-DC LED driver
AIMTEC

AMER120-24500AZ-F

AC/DC LED Driver; Product Weight (grams): 900; Input voltage min (V): 90; Input voltage max (V): 305; Input frequency (Hz): 47-440; Output voltage min: 12; Output voltage max: 24; Output voltage dual assymetric (y/n): Single; Output Power (W): 120; Max Output current (A): 0-5; Efficiency (%): 86; Package type: Encapsulated; Rating (IP): IP68; Mounting: Wire terminal; W (in): 1.85; L (in): 7.13; H (in): 2.32; W (mm): 47; L (mm): 181; H (mm): 59; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VAC): 3000; EMC compliance 1: EN 55022 Class B; Case material: Aluminum
AIMTEC

AMER120-24500CAZ

up to 5A | AC-DC / DC-DC | LED Driver / Converter
AIMTEC

AMER120-30400KZ-C1

up to 4000mA | AC-DC LED driver
AIMTEC

AMER120-36340AZ

up to 5A | AC-DC LED driver
AIMTEC

AMER120-36340CAZ

up to 5A | AC-DC / DC-DC | LED Driver / Converter
AIMTEC

AMER120-42250Z

up to 3000mA | AC-DC LED driver
AIMTEC

AMER120-42300Z

up to 3000mA | AC-DC LED driver
AIMTEC

AMER120-50250AZ

up to 5A | AC-DC LED driver
AIMTEC

AMER120-50250CAZ

up to 5A | AC-DC / DC-DC | LED Driver / Converter
AIMTEC

AMER120-AZ

up to 5A | AC-DC LED driver
AIMTEC