APX9154A [ANPEC]
Single-Phase Full-Wave Motor Driver with Built-in Hall Sensor;型号: | APX9154A |
厂家: | ANPEC ELECTRONICS COROPRATION |
描述: | Single-Phase Full-Wave Motor Driver with Built-in Hall Sensor |
文件: | 总12页 (文件大小:216K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
APX9154A
Single-Phase Full-Wave Motor Driver with Built-in Hall Sensor
Features
General Description
•
On-chip Hall Sensor
The APX9154A is an integrated Hall Effect Sensor IC de-
signed for electric commutation of single-phase DC
brushless motor applications. The device is built-in lock
•
PWM Soft Switch
protection. When fan is locked, the device will enter the
lock protection mode. It is also with thermal shutdown
function. The APX9154A is available in a low cost XTDFN
2x1.5-6 package.
•
•
•
Built-in Reverse Voltage Protection Circuit
High Sensitivity Hall Effect Sensor IC : +10G
Built-in Lock Protection and Auto Restart Func-
tion
•
•
•
•
•
•
•
Soft Start Function
Built-In Quick Start Function
Speed Controllable by PWM Input Signal
FG (Rotation Speed Detection) Output
Built-in Thermal Protection Circuit
6 Pin XTDFN 2x1.5-6 Package
Pin Configuration
Lead Free and Green Devices Available (RoHS
Compliant)
FG 1
PWM 2
OUT1 3
6 VDD
5 GND
4 OUT2
Applications
•
•
Brushless DC Fans
XTDFN 2x1.5-6
(Top View)
Brushless DC Motors
Ordering and Marking I nform ation
APX9154A
Package Code
QH : XTDFN 2x1.5-6
Assembly Material
Handling Code
Temperature Range
Package Code
Operating Ambient Temperature Range
I : -40 to 105 ℃
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APX9154A QH :
A54X
The last X is referred as Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain
the latest version of relevant information to verify before placing orders.
Copyright
ANPEC Electronics Corp.
1
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Absolute Maxim um Ratings
Symbol
Parameter
Rating
Unit
V
VDD
VDD Pin Supply Voltage (VDD to GND)
Output Pin (OUT1, OUT2) Output Voltage
Output Pin (OUT1, OUT2) Maximum Output Current – Continuous
Hold
-0.3 to 7
-0.3 to 7
500
VOUT
V
IOUT
IFG
mA
1000
FG Pin Output Sink Current
20
-0.3 to 7
150
mA
V
oC
oC
oC
FG Pin Output Voltage
TJ
Maxim um Junction Temperature
Storage Temperature
TSTG
TSOR
-65 to 150
260
Maxim um Lead Soldering Temperature, 10 Seconds
Note 1 : Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device.
Therm al Characteristics
Symbol
Parameter
Typical Value
138.8
Unit
Thermal Resistance-Junction to Ambient
RTH,JA
oC/W
XTDFN 2x1.5-6
XTDFN 2x1.5-6
Power Dissipation, TA = 25°C
PD
mW
900
Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD =(TJ-TA) / RTH,JA; TJ = 150oC.
Exceeding the maximum allowable power dissipation will result in excessive die temperature.
Recom m ended Operating Conditions
Symbol
Parameter
Range
1.7 to 6
Unit
V
VDD
VDD Supply Voltage
TA
Operating Ambient Temperature
Junction Temperature
-40 to 105
-40 to 125
oC
oC
TJ
Copyright
ANPEC Electronics Corp.
2
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Electrical Characteristics (TA = 25°C, VDD = 5V, unless otherwise noted)
APX9154A
Symbol
Parameter
Test Condition
Unit
Min.
Typ.
Max.
IDD
VO
VDD Supply Current
VDD=5V
-
5
7
mA
V
Output Driver Saturation Voltage
IOUT=250mA, Upper and Lower
total
-
0.25
0.4
VFG
IFGL
FG Pin Low Voltage
IFG =5mA
VFG =5V
-
0.2
<0.1
-
0.4
1
V
μA
V
FG Pin Off Leakage Current
-
VPWMH Pulse Mode PWM Input High Level Voltage
0.5*VDD
VDD+0.5
0.2*VDD
-20
VPWML
IPWML
TON
Pulse Mode PWM Input Low Level Voltage
PWM Pin Low Level Input Current
Lock Detection On Time
0
-
-
V
VPWM = 0V
-10
0.5
2.5
-
μA
sec
sec
kHz
oC
0.35
1.75
0.2
-
0.65
3.25
50
TOFF
Lock Detection Off Time
FPWM
OTS
PWM Input Frequency
Over Temperature Shutdown Threshold
Over Temperature Shutdown Hysteresis
165
30
-
-
-
oC
Magnetic Characteristics (TA = 25°C, VDD = 5V, unless otherwise noted)Note3
APX9154A
Symbol
Parameter
Test Condition
Unit
Min.
Typ.
Max.
Bop
Magnetic Operation Point
0
10
20
Gauss
Brp
Magnetic Release Point
Magnetic Hysteresis
-20
-
-10
20
0
-
Gauss
Gauss
Bhys
Note 3 : For start up only.
Copyright
ANPEC Electronics Corp.
3
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Pin Descriptions
PIN
Function
NO.
1
NAME
FG
Rotation Speed Output. This is an open-drainoutput.
2
PWM
PWM Signal Input Terminal.
H-bridge output connection. The output stage is a H-bridge formed by four transistors and four-protection
diode for switching applications.
3
4
OUT1
OUT2
H-bridge output connection. The output stage is a H-bridge formed by four transistors and four-protection
diode for switching applications.
5
6
GND
VDD
Ground of the IC.
Supply Voltage Input.
Block Diagram
PWM
VDD
Reverse
protect
Voltage
Regulator
PWM Control
Circuit
OUT2
OUT1
Hall
Plane
Logic Control
Circuit
FG
Oscillator
GND
Copyright
ANPEC Electronics Corp.
4
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Typical Application Circuit
VIN
Pull High
Voltage
Option
2Ω
1µF
10KΩ
FG
VDD
6
1
2
3
RFG
PWM Signal
GND 5
PWM APX9154A
OUT1
4
OUT2
Note : The 1µF is option to avoid power noise.
Note1:The 1µF and 2Ω are to avoid IC damage at hot plug ON/OFF moments.
Copyright
ANPEC Electronics Corp.
5
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Function Description
Lockup Protection and Automatic Restart
Output Switch Principle
The APX9154A built in a Hall-effect sensor plane to sense
the vertical magnetic flux density (B). There are two out-
put drivers in APX9154A to drive single-phase DC
brushless motor. When the N pole magnetic field close
to the IC marking surface and the magnetic flux density
higher than operate point (Bop), the OUT1 pin output will
turn to HIGH and the OUT2 pin output will turn to LOW.
When the N pole magnetic field far away the IC marking
surface and S pole magnetic field close to the IC marking
surface until the magnetic flux density higher than re-
lease point (Brp), the OUT1 pin output will turn LOW and
the OUT2 pin output will turn HIGH.
The APX9154A detects the rotation of the motor by inter-
nal hall sensor signal, and adjusts lock detection ON
time (TON) and lock detection OFF time (TOFF) by internal
counter.
B=0
T
T
OFF
OFF
OUT2
T
Brp
Bop
ON
OUT1
S
N
N
S
Marking Surface
Marking Surface
FG
VOUT2
VOUT2
Lock
Detection
Lock
Release Reset
Speed Control by Direct PWM Input Signal
B
B
Brp
Bop
Brp
Bop
Applying PWM pulses to the PWM pin directly, the duty
cycle of PWM pulses will control the output driver ON duty
directly. In PWM control, the high level of pulse signal
should be higher than 0.5*VDD and the low level should
be lower than 0.2*VDD. When the PWM pin is floating, the
output driver of APX9154A will be full duty to drive the
motor.
Bhys
Bhys
VOUT1
VOUT1
B
B
Brp
Bop
Brp
Bop
Copyright
ANPEC Electronics Corp.
6
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Function Description( Cont.)
Soft-Starf Function
The APX9154A provides the soft-start function to reduce
vibration at power-on and lock-restart moments. The soft-
start function has four stages 50% → 70% → 90% →
100%. At first the output duty is 50% after 64 FG H-L cycle
times the output duty is change to next stage 70% until
192 FG H-L cycle times the soft-start function will end. If
the voltage higher than 3.2V or Direct PWM Duty higher
than 50% soft-start function is enable,else the soft-start
function is disable.
Bop
Brp
B=0
OUT1
OUT2
FG
Bop
B=0
Brp
VCC
OUTPUT Duty 50%
OUTPUT Duty 70%
OUTPUT Duty 90%
OUTPUT Full Duty
PWM Soft-Stwitch
operation
Start-up operation
OUT1
OUT2
Quick Start and StandbyMode
This IC would enter standby mode when the PWM input
keeps low level for then 66.5m(typ.). In standby mode, it
will shutdown amplifier and FG. In standby mode, the
lock protection function doesn’t work, therefore, starting
fan is unobstructed when releasing standby mode.
FG H-L 64 cycle
times
FG H-L 64 cycle
times
FG H-L 64 cycle
times
FG
Soft-Start Function
Normal operation
PWM
PWM Soft-Switch Function
66.5ms (typ.)
The APX9154A built in PWM soft-switch output control cir-
cuit to improve the vibration and noise of fan motor
operation. At start-up operation, the APX9154A drive the
output driver by square wave to force the fan motor start to
rotate. After several square wave outputs , the internal
PWM soft-switch control circuit will be enable to drive fan
motor to improve vibration and noise.
Lock protect
enable (Internal)
enable
disable
enable
Thermal Function
The APX9154A is designed with a thermal protection to
protect the IC from the damage of over temperature.
Wheninternal junction temperature reaches 165oC, the
output devices will be switched off. When the IC’s junc-
tion temperature cools by 30oC, the thermal sensor will
turn the output devices on again resulting in a pulsed
Output during continuous thermal overload.
Copyright
ANPEC Electronics Corp.
7
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Package I nform ation
XTDFN 2x1.5-6
D
A
Pin 1
A1
A3
NX
aaa
C
Pin 1 Corner
SEATING PLANE
L
L1
0.87
Pin 1
S
Y
M
B
O
L
XTDFN2*1.5-6
MILLIMETERS
MIN. MAX.
INCHES
MIN.
MAX.
0.016
0.002
A
0.30
0.00
0.40
0.05
0.012
0.000
A1
A3
0.102 REF
0.004 REF
0.008
0.075
0.055
0.012
0.083
0.063
b
0.20
1.90
1.40
0.30
2.10
1.60
D
E
e
L
0.50 BSC
0.020 BSC
0.014
0.010
0.25
0.35
L1
0.075REF.
0.08
0.003REF.
0.003
aaa
Copyright
ANPEC Electronics Corp.
8
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Carrier Tape & Reel Dim ensions
P0
P2
P1
OD0
A
K0
A0
A
OD1
B
B
SECTION A-A
SECTION B-B
d
T1
Application
A
H
T1
C
d
D
W
E1
F
8.4+2.00
-0.00
13.0+0.50
-0.20
178.0±2.00
P0
50 MIN.
P1
1.5 MIN.
D1
20.2 MIN.
8.0 ±0.20 1.75±0.10
3.5±0.05
K0
XTDFN(2x1.5)
P2
D0
T
A0
B0
1.5+0.10
-0.00
0.6+0.00
-0.40
4.0±0.10
4.0±0.10
2.0±0.05
1.5 MIN.
1.70±0.10 2.20±0.10 0.56±0.05
(mm)
Devices Per Unit
Package Type
XTDFN(2x1.5)
Unit
Quantity
3000
Tape & Reel
Copyright
ANPEC Electronics Corp.
9
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Taping Direction I nform ation
XTDFN2x1.5
USER DIRECTION OF FEED
Classification Profile
Copyright
ANPEC Electronics Corp.
10
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Classification Reflow Profiles
Profile Feature
Sn-Pb Eutectic Assembly
Pb-Free Assembly
Preheat & Soak
100 °C
150 °C
60-120 seconds
150 °C
200 °C
60-120 seconds
Temperature min (Tsmin
)
Temperature max (Tsmax
Time (Tsmin to Tsmax) (ts)
)
Average ramp-up rate
(Tsmax to TP)
3 °C/second max.
3°C/second max.
Liquidous temperature (TL)
Time at liquidous (tL)
183 °C
60-150 seconds
217 °C
60-150 seconds
Peak package body Temperature
(Tp)*
See Classification Temp in table 1
20** seconds
See Classification Temp in table 2
30** seconds
Time (tP)** within 5°C of the specified
classification temperature (Tc)
Average ramp-down rate (Tp to Tsmax
)
6 °C/second max.
6 °C/second max.
6 minutes max.
8 minutes max.
Time 25°C to peak temperature
* Tolerance for peak profile Temperature (Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Table 1. SnPb Eutectic Process – Classification Temperatures (Tc)
Volume mm3
≥350
Package
Thickness
<2.5 mm
≥2.5 mm
Volume mm3
<350
235 °C
220 °C
220 °C
220 °C
Table 2. Pb-free Process – Classification Temperatures (Tc)
Package
Thickness
<1.6 mm
Volume mm3
Volume mm3
350-2000
260 °C
Volume mm3
<350
>2000
260 °C
245 °C
245 °C
260 °C
260 °C
250 °C
1.6 mm – 2.5 mm
≥2.5 mm
250 °C
245 °C
Reliability Test Program
Test item
Method
JESD-22, B102
Description
5 Sec, 245°C
1000 Hrs, Bias @ Tj=125 C
SOLDERABILITY
HOLT
JESD-22, A108
JESD-22, A102
JESD-22, A104
°
PCT
%
°
168 Hrs, 100 RH, 2atm, 121 C
TCT
°
°
500 Cycles, -65 C~150 C
VHBM≧2KV
HBM
MIL-STD-883-3015.7
JESD-22, A115
JESD 78
VMM≧200V
MM
10ms, 1tr≧100mA
Latch-Up
Copyright
ANPEC Electronics Corp.
11
www.anpec.com.tw
Rev. A.2 - Mar., 2017
APX9154A
Custom er Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright
ANPEC Electronics Corp.
12
www.anpec.com.tw
Rev. A.2 - Mar., 2017
相关型号:
©2020 ICPDF网 联系我们和版权申明