FSUSB45UMX [FAIRCHILD]
Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect; 高速USB2.0传输(480Mbps )开关专用充电器端口检测型号: | FSUSB45UMX |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect |
文件: | 总2页 (文件大小:438K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
July 2008
FSUSB45 — Hi-Speed USB2.0 (480Mbps) Switch with
Dedicated Charger Port Detect
Features
Description
The FSUSB45 is a bi-directional, low-power, two-port,
Hi-Speed, USB2.0 switch. Configured as a double-pole,
double-throw (DPDT) switch, it is optimized for
switching between two Hi-Speed (480Mbps) sources or
a Hi-Speed source and a Full-Speed (12Mbps) source.
Low On Capacitance: 7.0pF Typical
Low On Resistance: 3.9Ω Typical
Low Power Consumption: 1μA Maximum
-15μA Maximum ICCT over an Expanded Voltage
The FSUSB45 is compatible with the requirements of
USB2.0 and features an extremely low on capacitance
(CON) of 7.0pF. The wide bandwidth of this device
(720MHz) exceeds the bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge
and phase distortion. Superior channel-to-channel
crosstalk also minimizes interference.
Range (VIN=1.8V, VCC=4.3V)
Wide -3db Bandwidth: > 720MHz
Packaged in:
-10-Lead MicroPak™ (1.6 x 2.1mm)
-10-Lead UMLP (1.4 x 1.8mm)
8kV ESD Rating, >16kV Power/GND ESD Rating
Power-Off Protection on All Ports When VCC=0V
-D+/D- Pins Tolerate up to 5.25V
The FSUSB45 contains special circuitry on the switch
I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to
withstand an over-voltage condition. This device is
designed to minimize current consumption even when
the control voltage applied to the SEL pin is lower than
the supply voltage (VCC). This feature is especially
valuable to mobile applications, such as cell phones,
allowing for direct interface with the general-purpose
I/Os of the baseband processor. An additional feature is
the detection of the 1,1 state on D+/D- to signal an
interrupt (INT) to the processor when entering a
dedicated charging port mode of operation.
Applications
Cell Phone, PDA, Digital Camera, and Notebook
LCD Monitor, TV, and Set-top Box
IMPORTANT NOTE:
For additional performance information, please contact
analogswitch@fairchildsemi.com.
Figure 1. Analog Symbol
Ordering Information
Top
Operating
Part Number
Package
Eco Status
RoHS
Mark Temperature Range
10-Lead MicroPak™ 1.6 x 2.1mm,
JEDEC MO-255B
FSUSB45L10X
FSUSB45UMX
JA
JB
-40 to +85°C
-40 to +85°C
10-Lead, Quad, Ultrathin Molded Leadless
Package (UMLP), 1.4 x 1.8mm
Green
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
© 2007 Fairchild Semiconductor Corporation
FSUSB45 • Rev. 1.0.5
www.fairchildsemi.com
CONFIDENTIAL & PROPRIETARY — DO NOT DISTRIBUTE
© 2007 Fairchild Semiconductor Corporation
FSUSB45 • Rev. 1.0.5
www.fairchildsemi.com
10
相关型号:
©2020 ICPDF网 联系我们和版权申明