HMC626ALP5E [HITTITE]
Wide Band Medium Power Amplifier,;型号: | HMC626ALP5E |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | Wide Band Medium Power Amplifier, |
文件: | 总8页 (文件大小:420K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Typical Applications
The HMC626ALP5E is ideal for:
• IF & RF Applications
Features
+8.5 dB to +40 dB Gain Control in 0.5 dB Steps
High Output IP3: +36 dBm
±0.25 dB Typical Gain Step Error
Single +5V Supply
32 Lead 5x5 mm SMT Package: 25 mm2
• Cellular/3G Infrastructure
• WiBro / WiMAX / 4G
• Microwave Radio & VSAT
• Test Equipment and Sensors
Functional Diagram
General Description
The HMC626ALP5E is a digitally controlled variable
gain amplifier which operates from DC to 1 GHz, and
can be programmed to provide anywhere from 8.5 dB,
to 40 dB of gain, in 0.5 dB steps. The HMC626ALP5E
delivers noise figure of 2.8 dB in its maximum gain
state, with output IP3 of up to +36 dBm in any state.
This single positive control line per bit digital VGA
incorporates off chip AC ground capacitors for near
DC operation, making it suitable for a wide variety of
RF and IF applications. The HMC626ALP5E is housed
in a RoHS compliant 5x5 mm QFN leadless package,
and requires no external matching components. A
serial control version of this product is available as the
HMC681ALP5E.
Electrical Specifications, TA = +25° C, Vdd = Vs= +5V, Vctl= 0/ +5V
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 0.5 GHz
0.5 - 1.0 GHz
37
30
42.5
35.0
dB
dB
Gain (Maximum Gain State)
Gain Control Range
Input Return Loss
Output Return Loss
31.5
20
dB
dB
dB
15
Gain Setting Accuracy: (Referenced to Maximum Gain State)
All Gain States
0.05 - 1.0 GHz
DC - 1.0 GHz
± (0.15 + 3% of Relative Gain Setting) Max.
dB
Output Power for 1 dB Compression
20
dBm
Output Third Order Intercept Point
(Two-Tone Output Power= 5 dBm Each Tone)
DC - 1.0 GHz
DC - 1.0 GHz
36
dBm
Noise Figure
2.8
dB
Switching Characteristics
DC - 1.0 GHz
DC - 1.0 GHz
100
120
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
ns
ns
Total Supply Current (Idd + 2*Is)
178.4
225
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
1
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Relative Gain Setting
(Referenced to Maximum Gain State)
Gain vs. Frequency[1]
(Only Major States are Shown)
50
[1]
45
0
-5
-10
-15
-20
-25
-30
-35
40
35
30
[2]
25
20
15
10
5
0
0
0.3
0.6
0.9
1.2
1.5
0
0.3
0.6
0.9
1.2
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
+25 C
+85 C
-40 C
Input Return Loss[1]
(Only Major States are Shown)
Output Return Loss[1]
(Only Major States are Shown)
0
-5
0
-5
31.5 dB
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
IL
-30
-35
-40
0
0.3
0.6
0.9
1.2
1.5
0
0.3
0.6
0.9
1.2
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Output Return Loss[2]
(Only Major States are Shown)
Input Return Loss[2]
(Only Major States are Shown)
0
0
-5
-5
31.5 dB
-10
-10
-15
-20
-25
-30
-35
-40
-15
-20
-25
-30
IL
-35
-40
0
0.3
0.6
0.9
1.2
1.5
0
0.3
0.6
0.9
1.2
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Tested on eval board with broadband bias tees, C7, C8 = 10,000 pF ; L1, L2 = 680 nH
[2] Tested on eval board with broadband bias tees, C7, C8 = 330 pF ; L1, L2 = 110 nH
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
2
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Bit Error vs. Frequency[2]
Bit Error vs. Relative Gain Setting[2]
(Only Major States are Shown)
2
2
1.5
1.5
31.5 dB
1
1
0.5
0
400, 800, 1000 MHz
0.5
0
-0.5
-1
-0.5
-1
200 MHz
100 MHz
-1.5
-2
-1.5
-2
0
0.3
0.6
0.9
1.2
1.5
0
4
8
12
16
20
24
28
32
RELATIVE GAIN SETTING (dB)
FREQUENCY (GHz)
Relative Phase vs. Frequency[2]
(Only Major States are Shown)
Step Error vs. Frequency[2]
(Only Major States are Shown)
60
50
40
1
0.8
0.6
0.4
0.2
0
30
31.5 dB
20
16 dB
10
0
-0.2
-0.4
-0.6
-0.8
-1
-10
0.5 - 8 dB
-20
-30
-40
0
0.3
0.6
0.9
1.2
1.5
0
0.3
0.6
0.9
1.2
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Tested on eval board with broadband bias tees, C7, C8 = 10,000 pF ; L1, L2 = 680 nH
[2] Tested on eval board with broadband bias tees, C7, C8 = 330 pF ; L1, L2 = 110 nH
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Truth Table
Bias Voltage & Current
Control Voltage Input
Relative
Vdd (V)
Idd (Typ.) (mA)
Gain
Setting
V1
16 dB
V2
8dB
V3
4 dB
V4
2 dB
V5
1 dB
V6
0.5 dB
+4.5
2.3
2.4
+5.0
Reference
0 dB
+5.5
2.5
High
High
High
High
High
High
Vs (V)
+5.0
Is (mA)
88
High
High
High
High
High
Low
High
High
High
High
Low
High
High
High
Low
High
High
Low
High
Low
Low
High
High
High
High
High
Low
-0.5 dB
-1 dB
High
High
High
High
Low
-2 dB
Control Voltage Table
High
High
High
Low
-4 dB
High
High
Low
-8 dB
State
Vdd = +3V
Vdd = +5V
High
Low
-16 dB
-31.5 dB
Low
0 to 0.5V @ <1 µA
2 to 3V @ <1 µA
0 to 0.8V @ <1 µA
2 to 5V @ <1 µA
Low
High
Any combination of the above states will provide a relative gain
setting approximately equal to the sum of the bits selected.
Absolute Maximum Ratings
RF Input Power [1]
(At Max Gain Setting)
-10.5 dBm (T = +85 °C)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Bias Voltage (Vdd)
+5.5 Vdc
5.5 Vdc
150 °C
Collector Bias Voltage (Vcc)
Channel/Junction Temperature
Continuous Pdiss (T = 85 °C)
(derate 18.2 mW/°C above 85 °C) [2]
1.18 W
Thermal Resistance [3]
Storage Temperature
Operating Temperature
55°C/W
-65 to +150 °C
-40 to +85 °C
[1] The Max RF Input Power Rating will increase by 0.5 dB for every
0.5 dB reduction in gain to a maximum RF Input Power of 10 dBm.
[2] This value is the total power dissipation in the amplifier.
[3] This is the thermal resistance for the amplifier.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
4
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
Package Marking [2]
H626A
XXXX
MSL1 [1]
HMC626ALP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Pin Descriptions
Pin Number
Function
N/C
Description
Interface Schematic
1, 5, 9, 14, 16, 23,
24, 31
These pins may be connected to RF/DC ground.
Performance will not be affected.
This pin is DC coupled. An off chip DC blocking capacitor is
required.
2, 20
RFin1, RFin2
RF output and DC bias (Vcc) for the output stage of the
amplifiers. Amplifier bias provided via external bias tee as
shown in application circuit.
4, 22
3, 7, 18, 21
6, 19
RFout1, RFout2
These pins and package bottom
must be connected to RF/DC ground.
GND
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required. Select value based
on lowest frequency of operation.
ATTin,
ATTout
8, 10,
11, 12,
13, 15,
17
ACG1, ACG2,
ACG3, ACG4,
ACG5, ACG6,
ACG7
External capacitors to ground is required. Select value for
lowest frequency of operation. Place capacitor as close to
pins as possible.
See truth table, control voltage
table and timing diagram.
25 - 30
V1 - V6
32
Vdd
Supply voltage
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
6
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7
HMC626ALP5E
v00.1212
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Evaluation PCB
List of Materials for Evaluation PCB 117355-HMC626ALP5 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
Item
Description
J1 - J2
J3
PCB Mount SMA Connector
12 Pin DC Connector
J4 - J9
C1, C2, C9, C10
C3, C4
C5 - C8
C11 - C13
C14, C15
R1, R2
L1, L2
DC Pin
820 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
330 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
2.2 µF Capacitor, CASE A Pkg.
1.8 Ohm Resistor, 0603 Pkg.
110 nH Inductor, 0603 Pkg.
HMC626ALP5E Variable Gain Amplifier
118934 Evaluation PCB
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8
相关型号:
©2020 ICPDF网 联系我们和版权申明