HRF-SW1001-E [HONEYWELL]
SPDT Absorptive RF Switch; SPDT吸收射频开关型号: | HRF-SW1001-E |
厂家: | Honeywell |
描述: | SPDT Absorptive RF Switch |
文件: | 总6页 (文件大小:64K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HRF-SW1001
SPDT Absorptive RF Switch
Features
•
•
•
•
•
•
•
•
High Isolation Of > 40 dB @ 2 GHz
Low Insertion Loss Of 1.1dB @ 2 GHz
DC To 4GHz Operating Frequency
Integrated CMOS Control Logic
Integrated ESD Protection on Digital I/O
Single Positive Supply Voltage
Ultra Small LPCCTM Packaging
Impedance matched for 75 Ohm systems
Product Description
The Honeywell HRF-SW1001 is a high performance
single pole double throw (SPDT) absorptive RF switch
that is ideal for use in wireless basestation and handset
applications that require minimum power and minimum
insertion loss.
HRF-SW1001 in LPCCTM Package
The HRF-SW1001 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS technology,
which provides the performance of GaAs with the
economy and integration capabilities of conventional
CMOS technology.
RF Electrical Specifications @ + 25oC
Results @ Vdd=5.0 =/- 10%, Vss = 0 unless otherwise stated, Z0=75 ohms
Parameter
Insertion Loss
Test Condition
Frequency
DC – 0.5 GHz
2.0 GHz
Minimum
Typical
Maximum
Units
dB
dB
0.9
1.1
1.4
1.5
1.7
1.9
3.0 GHz
dB
Isolation
DC – 0.5 GHz
2.0 GHz
3.0 GHz
DC – 0.5 GHz
2.0 GHz
50
40
35
53.5
42.5
39.0
1.1:1
1.2:1
1.2:1
dB
dB
dB
Ratio
Ratio
Ratio
VSWR*
3.0 GHz
1.3:1
1dB Compression
Input IP3
Input Power
Vss=Gnd
Vss= -3
1.0 GHz
1.0 GHz
21
29
dBm
dBm
Two-Tone Inputs Up To + 5 dBm
Vss=Gnd
2.0 GHz
2.0 GHz
35
35
10
20
10
dBm
dBm
nS
nS
mV
Vss= -3
Trise, Tfall*
Ton, Toff
Transients
10% To 90%
50% Cntl To 90%/10%Rf
In-Band
*By design
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1001W
Published June 2002 Page 1
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1001
DC Electrical Specifications @ + 25oC
Parameter
Single VDD Supply Voltage
Minimum
3.3*
Typical
Maximum
5.5
Units
V
5.0
CMOS Logic Level (0)
0
0.8
V
CMOS Logic Level (1)
VDD – 0.8
VDD
V
Input Leakage Current
10
uA
* Performance curves are for Vdd = +5.0 +/- 10%
Absolute Maximum Ratings1
Parameter
Absolute Maximum
Units
VDD
+6.0
V
Vin Digital Logic 0
Vss - 0.6
Vdd + 0.6
> 35
V
V
Vin Digital Logic 1
Maximum Input Power
ESD Voltage
dBm
400
V
Operating Temperature Range
Storage Temperature Range
+85
Degrees C
Degrees C
+125
(Note 1) Operation beyond any of these parameters may cause permanent damage.
Latch-Up: Unlike conventional CMOS RF switches, Honeywell's HRF-SW1001 is immune to latch-up.
ESD Protection: Although this device contains ESD protection circuitry on all digital inputs, conventional precautions should be
taken to ensure that the Absolute Maximum Ratings are not exceeded.
Package Outline Drawing
Bottom View, 12 Pin 3X3 mm LPCCTM Package
ASAT LPCC Marketing Outline Dwg. # GMJ00004
For more information see http://www.asat.com
3 mm
3 mm
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1001W
Published June 2002 Page 2
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1001
Truth Table
Switch Control
RF Output 1
RF INPUT
- - -
RF Output 2
- - -
0
1
RF INPUT
"0" = CMOS Low, "1” = CMOS High
Pin Configuration
Pin
1
2
3
4
Function
GROUND
RF OUT 2
GROUND
Pin
7
8
Function
GROUND
RF OUT 1
GROUND
GROUND
RF IN
9
VDD
10
11
12
5
6
SWITCH CONTROL
VSS
GROUND
Evaluation Circuit Board Connections
RF
HRF-
Evaluation
Top
RF
RF
Honeywell HRF-SW1000
VSS
Ground
VDD
Open
SW
Control
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1001W
Published June 2002 Page 3
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1001
Performance Curves
Insertion Loss
Insertion Loss versus Frequency
0
-1
The Insertion Loss curve shows the worst
case loss versus frequency at Vdd = +5.0 +/-
10%, Ta = 25C, Z0 = 75 Ohms
-2
-3
-4
-5
-6
-7
-8
-9
-10
0
1
2
3
4
Frequency
Isolation
Isolation versus Frequency
-20.00
-30.00
-40.00
-50.00
-60.00
-70.00
-80.00
-90.00
-100.00
The Isolation curve shows the typical isolation
of an “off” state output to the insertion path.
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1001W
Published June 2002 Page 4
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1001
Return Loss
Input / Output Return Losses versus Frequency
0.00
-5.00
-10.00
-15.00
-20.00
-25.00
-30.00
-35.00
-40.00
-45.00
-50.00
The return loss curve shows the input
return loss S11, the output return loss in
the insertion path S22, and the output
return loss in the isolation state S33.
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Evaluation Circuit Board
Honeywell's evaluation board provides
an easy to use method of evaluating the
RF performance of our switch. Simply
connect power, DC and RF signals to
be measuring switch performance in
less than 10 minutes.
HRF-SW1001 Evaluation Board
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1001W
Published June 2002 Page 5
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1001
Evaluation Circuit Board Layout Design Details
Item
Description
PCB
Impedance Matched Multi-Layer FR4
Switch
HRF-SW1001 RF Switch
Chip Capacitor
RF Connector
DC Pin
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
Ordering Information
Ordering Number
HRF-SW1001-B
HRF-SW1001-TR
Product
Delivered In Chip Tubes
Delivered On Tape And Reel2
Engineering Evaluation Board
HRF-SW1001-E
(Note 2) Contact Honeywell for details
LPCCTM is a registered Trademark of ASAT Ltd.
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights nor the rights of others.
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1001W
Published June 2002 Page 6
Plymouth, Minnesota 55441-4799
1-800-323-8295
相关型号:
HRF-SW1020-B
SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.3dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, LPCC-20
HONEYWELL
HRF-SW1020-FL-TR
SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, HALOGEN FREE AND ROHS COMPLIANT, ULTRA SMALL, VQFN-20
HONEYWELL
HRF-SW1020-GR-T
SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20
HONEYWELL
HRF-SW1020-GR-TR
SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20
HONEYWELL
HRF-SW1021-TR
SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.5dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-20
HONEYWELL
©2020 ICPDF网 联系我们和版权申明