首页 |元器件品牌

HRF-SW1020-GR-TR [HONEYWELL]

SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20;
HRF-SW1020-GR-TR
型号： HRF-SW1020-GR-TR
厂家： Honeywell    Honeywell
描述：

SP4T, 0MHz Min, 2500MHz Max, 2.3dB Insertion Loss-Max, GREEN, ULTRA SMALL, VQFN-20

射频 微波
文件： 总5页 (文件大小：129K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
HRF-SW1020  
SP4T Absorptive RF Switch DC To 2.5 GHz Operation  
The Honeywell HRF-SW1020 is a high performance single pole four throw (SP4T)  
absorptive RF switch ideal for use in wireless basestation and handset applications that  
require minimum power and minimum insertion loss.  
The HRF-SW1020 is manufactured with Honeywell's patented Silicon On Insulator (SOI)  
CMOS technology, which provides the performance of GaAs with the economy and  
integration capabilities of conventional CMOS technology. These switches are DC  
coupled to improve lower operating frequency, frequency response and reduce the  
number of DC bias points required.  
FEATURES  
•
•
•
•
•
•
•
•
Typical High Isolation Of > 40 dB @ 2 GHz  
Typical Low Insertion Loss Of 1.7dB @ 1 GHz  
Integrated CMOS Control Logic  
DC-coupled, bi-directional RF Path  
Single Positive Supply Voltage  
Ultra Small VQFN Packaging  
Impedance matched for 50 Ohm systems  
Lead-free, RoHS compliant and Green  
RF ELECTRICAL SPECIFICATIONS @ + 25oC  
Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 50 Ohms  
Contact Honeywell for relative performance at other supply configurations  
Parameter  
Test Condition  
Frequency  
Minimum  
Typical  
Maximum  
Units  
1.0 GHz  
2.0 GHz  
2.5 GHz  
1.6  
1.7  
1.8  
1.9  
2.2  
2.3  
dB  
dB  
dB  
Insertion Loss  
1.0 GHz  
2.0 GHz  
2.5 GHz  
45  
33  
30  
54  
41  
39  
dB  
dB  
dB  
Isolation  
Return Loss  
Input P1dB  
-15  
-20  
dB  
VSS= Gnd  
VSS = -5V  
1.0 GHz  
1.0 GHz  
17  
27  
dBm  
dBm  
Two-Tone Inputs, up to + 5 dBm  
VSS = Gnd  
Input IP3  
2.0 GHz  
2.0 GHz  
35  
36  
dBm  
dBm  
VSS = -5V  
Trise, Tfall  
Ton, Toff  
10% To 90%  
50% Cntl To 90% / 10% RF  
10  
20  
ns  
ns  
HRF-SW1020  
DC ELECTRICAL SPECIFICATIONS @ + 25°C  
Parameter  
Minimum  
3.31  
Typical  
5.0  
Maximum  
Units  
V
VDD  
VSS  
IDD  
5.5  
-5.0  
V
<5  
35  
0.8  
VDD  
10  
uA  
V
CMOS Logic Level (0)  
CMOS Logic Level (1)  
Input Leakage Current  
0
VDD – 0.8  
V
uA  
Note 1 - Performance curves are for VDD = +5.0 +/- 10%  
ABSOLUTE MAXIMUM RATINGS1  
Parameter  
Absolute Maximum  
Units  
VDD  
VSS  
+6.0  
-5.5  
-0.6  
V
V
Vin Digital Logic 0  
V
Vin Digital Logic 1  
Vdd + 0.6  
> 35  
V
Input Power  
ESD Voltage2  
dBm  
V
400  
Moisture Sensitivity Level  
Operating Temperature Range  
Storage Temperature Range  
Level 3 @ 260°C  
-40 to +85  
-65 to +125  
°C  
°C  
Note 1 - Operation of this device beyond any of these parameters may cause permanent damage.  
Note 2 - Although the HRF-SW1020 contains ESD protection circuitry on all digital inputs, precautions should be taken to  
ensure that the Absolute Maximum Ratings are not exceeded.  
Latch-Up: Unlike conventional CMOS digital switches, Honeywell’s HRF-SW1020 is immune to latch-up.  
TRUTH TABLE  
C1  
C0  
RF Output 1  
RF Output 2  
RF Output 3  
RF Output 4  
0
0
1
1
0
1
0
1
RFINPUT  
RFINPUT  
RFINPUT  
RFINPUT  
"0" = CMOS Low, "1” = CMOS High  
PIN CONFIGURATIONS  
Pin  
Function  
Pin  
Function  
Pin  
Function  
Pin  
Function  
1
2
3
4
5
GROUND  
RFOUTPUT4  
GROUND  
VDD  
6
7
8
9
10  
RFOUTPUT3  
GROUND  
GROUND  
GROUND  
RFOUTPUT2  
11  
12  
13  
14  
15  
C1  
C0  
GROUND  
RFOUTPUT1  
GROUND  
16  
17  
18  
19  
20  
GROUND  
GROUND  
RFINPUT  
GROUND  
VSS  
GROUND  
Note: Bottom ground plate must be grounded for proper RF performance.  
2
www.honeywell.com/microwave  
HRF-SW1020  
PERFORMANCE CURVES  
Insertion Loss  
Typical SW1020 Insertion Loss  
0
-0.5  
-1  
-1.5  
-2  
-2.5  
-3  
-3.5  
-4  
0
0.5  
1
1.5  
2
2.5  
Frequency (GHz)  
Isolation  
Typical SW1020 Isolation  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
0.0  
0.5  
1.0  
1.5  
2.0  
2.5  
Frequency (GHz)  
www.honeywell.com/microwave  
3
HRF-SW1020  
PACKAGE OUTLINE DRAWING  
Notes  
1. Pin 1 identifier can be a combination or a dot and/or chamfer.  
2. Dimensions are in millimeters.  
GREEN MATERIAL SET  
The –GR switches have a Green material set that can withstand a maximum soldering temperature of 260OC.  
LEAD FINISH  
The package leads are Nickel Palladium Gold (NiPdAu). The configuration being manufactured and delivered today is  
lead-free RoHS compliant. Compliant packages have half-etch leadframes and have date codes of 0300 or greater.  
LEAD FREE QFN SURFACE MOUNT APPLICATION  
Please see Application Note AN310 for assembly process recommendations. The maximum soldering temperature of the  
-GR is 260oC (-AU switches are 250 oC). Application Notes can be found at our website: www.honeywell.com/microwave  
CIRCUIT APPLICATION INFORMATION  
These switches require a DC reference to ground. They may not operate properly when AC coupled on both the RF input  
and output without a DC ground reference provided as part of the circuit. See Application Note AN311.  
4
www.honeywell.com/microwave  
HRF-SW1020  
EVALUATION CIRCUIT BOARD  
Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our switch. Simply  
connect power; DC and RF signals to be measuring switch performance in less than 10 minutes.  
Gnd  
C1  
C0  
RF Input  
VSS  
VDD  
Gnd  
HRF-SW1020-A  
HRF-SW1020  
Evaluation Board  
Top View  
RF Out4  
RF Out1  
HRF-SW1020 Evaluation Board  
RF Out3  
RF Out2  
EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS  
Item  
Description  
PCB  
Impedance Matched Multi-Layer FR4  
HRF-SW1020 RF Switch  
Switch  
Chip Capacitor  
RF Connector  
DC Pin  
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V  
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector  
Mil-Max Model 800-10-064-10-001 Header Pins  
ORDERING INFORMATION  
Ordering Number  
Delivery Method  
Units Per Shipment  
HRF-SW1020-GR-TR  
HRF-SW1020-GR-T  
HRF-SW1020- E  
Tape & Reel  
Tape  
Evaluation Board  
2500 Units per Reel  
< 2500  
One Board Per Box  
The new –GR switches will replace and are fully back-compatible with the –AU switches. The –AU switches are obsolete.  
FIND OUT MORE  
For more information on Honeywell’s Microwave Products visit us online at www.honeywell.com/microwave or contact  
us at 800-323-8295 (763-954-2474 internationally).  
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the  
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.  
Honeywell  
12001 Highway 55  
Plymouth, MN 55441  
Tel: 800-323-8295  
www.honeywell.com/microwave  
Form #1020W  
September 2007  
©2007 Honeywell International Inc.  

相关型号：

HRF-SW1021

 SP4T Absorptive RF Switch DC To 2.5 GHz Operation
HONEYWELL

HRF-SW1021-E

 SP4T Absorptive RF Switch DC To 2.5 GHz Operation
HONEYWELL

HRF-SW1021-T

 SP4T Absorptive RF Switch DC To 2.5 GHz Operation
HONEYWELL

HRF-SW1021-TR

 SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.5dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-20
HONEYWELL

HRF-SW1022-B

 SP4T, 0MHz Min, 6000MHz Max, 1 Func, CMOS, 4 X 4 MM, ULTRA SMALL, QFPN-20
HONEYWELL

HRF-SW1022-TR

 SP4T, 0MHz Min, 6000MHz Max, 1 Func, CMOS, 4 X 4 MM, ULTRA SMALL, QFPN-20
HONEYWELL

HRF-SW1030

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-B

 SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, LPCC-24
HONEYWELL

HRF-SW1030-E

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-FL-TR

 SP6T, 0MHz Min, 2500MHz Max, 3.8dB Insertion Loss-Max, VQFN-24
HONEYWELL

HRF-SW1030-GR-T

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-GR-TR

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL
©2020 ICPDF网 联系我们和版权申明