IRFR4620PBF [INFINEON]
HEXFET Power MOSFET; HEXFET功率MOSFET型号: | IRFR4620PBF |
厂家: | Infineon |
描述: | HEXFET Power MOSFET |
文件: | 总11页 (文件大小:386K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PD -96207A
IRFR4620PbF
IRFU4620PbF
HEXFET® Power MOSFET
Applications
l High Efficiency Synchronous Rectification in SMPS
l Uninterruptible Power Supply
l High Speed Power Switching
D
S
VDSS
RDS(on) typ.
200V
64m
78m
24A
G
max.
l Hard Switched and High Frequency Circuits
ID
Benefits
l Improved Gate, Avalanche and Dynamic dV/dt
D
D
Ruggedness
l Fully Characterized Capacitance and Avalanche
SOA
S
D
S
l Enhanced body diode dV/dt and dI/dt Capability
l Lead-Free
G
G
DPak
IRFR4620PbF
IPAK
IRFU4620PbF
G
D
S
Gate
Drain
Source
Absolute Maximum Ratings
Symbol
Parameter
Continuous Drain Current, VGS @ 10V
Continuous Drain Current, VGS @ 10V
Pulsed Drain Current
Max.
24
Units
ID @ TC = 25°C
ID @ TC = 100°C
IDM
17
A
100
PD @TC = 25°C
W
144
Maximum Power Dissipation
Linear Derating Factor
0.96
W/°C
V
VGS
± 20
Gate-to-Source Voltage
54
Peak Diode Recovery
dv/dt
TJ
V/ns
-55 to + 175
Operating Junction and
TSTG
Storage Temperature Range
Soldering Temperature, for 10 seconds
(1.6mm from case)
°C
300
Avalanche Characteristics
Single Pulse Avalanche Energy
EAS (Thermally limited)
113
mJ
A
Avalanche Current
IAR
See Fig. 14, 15, 22a, 22b,
Repetitive Avalanche Energy
EAR
mJ
Thermal Resistance
Symbol
Parameter
Typ.
–––
–––
–––
Max.
1.045
50
Units
RθJC
Junction-to-Case
RθJA
RθJA
°C/W
Junction-to-Ambient (PCB Mount)
Junction-to-Ambient
110
ORDERING INFORMATION:
See detailed ordering and shipping information on the last page of this data sheet.
Notes through are on page 11
www.irf.com
1
06/08/09
IRFR/U4620PbF
Static @ TJ = 25°C (unless otherwise specified)
Symbol
V(BR)DSS
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
Min. Typ. Max. Units
200 ––– –––
––– 0.23 ––– V/°C Reference to 25°C, ID = 5mA
Conditions
VGS = 0V, ID = 250µA
V
∆V(BR)DSS/∆TJ
RDS(on)
–––
3.0
64
78
5.0
20
VGS = 10V, ID = 15A
mΩ
V
VGS(th)
–––
VDS = VGS, ID = 100µA
IDSS
Drain-to-Source Leakage Current
––– –––
VDS = 200V, VGS = 0V
µA
––– ––– 250
––– ––– 100
––– ––– -100
VDS = 200V, VGS = 0V, TJ = 125°C
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Internal Gate Resistance
VGS = 20V
nA
VGS = -20V
RG(int)
–––
2.6
–––
Ω
Dynamic @ TJ = 25°C (unless otherwise specified)
Symbol
gfs
Parameter
Forward Transconductance
Min. Typ. Max. Units
Conditions
VDS = 50V, ID = 15A
37
––– –––
S
Qg
Total Gate Charge
–––
–––
–––
–––
25
8.2
7.9
17
38
ID = 15A
Qgs
Qgd
Qsync
td(on)
tr
Gate-to-Source Charge
–––
–––
–––
VDS = 100V
nC
Gate-to-Drain ("Miller") Charge
Total Gate Charge Sync. (Qg - Qgd)
VGS = 10V
ID = 15A, VDS =0V, VGS = 10V
VDD = 130V
Turn-On Delay Time
––– 13.4 –––
––– 22.4 –––
––– 25.4 –––
––– 14.8 –––
––– 1710 –––
––– 125 –––
Rise Time
ID = 15A
ns
td(off)
tf
Turn-Off Delay Time
RG = 7.3Ω
VGS = 10V
Fall Time
Ciss
Coss
Crss
Input Capacitance
VGS = 0V
Output Capacitance
VDS = 50V
Reverse Transfer Capacitance
Effective Output Capacitance (Energy Related)
Effective Output Capacitance (Time Related)
–––
30
–––
ƒ = 1.0MHz (See Fig.5)
pF
C
oss eff. (ER)
oss eff. (TR)
––– 113 –––
––– 317 –––
V
GS = 0V, VDS = 0V to 160V (See Fig.11)
GS = 0V, VDS = 0V to 160V
C
V
Diode Characteristics
Symbol
Parameter
Continuous Source Current
Min. Typ. Max. Units
Conditions
MOSFET symbol
IS
D
––– –––
24
(Body Diode)
showing the
A
G
ISM
Pulsed Source Current
(Body Diode)
integral reverse
––– ––– 100
S
p-n junction diode.
VSD
trr
Diode Forward Voltage
Reverse Recovery Time
––– –––
1.3
–––
–––
V
TJ = 25°C, IS = 15A, VGS = 0V
TJ = 25°C
TJ = 125°C
TJ = 25°C
TJ = 125°C
TJ = 25°C
VR = 100V,
IF = 15A
di/dt = 100A/µs
–––
–––
78
99
ns
Qrr
Reverse Recovery Charge
––– 294 –––
––– 432 –––
nC
A
IRRM
ton
Reverse Recovery Current
Forward Turn-On Time
–––
7.6
–––
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
2
www.irf.com
IRFR/U4620PbF
1000
100
10
1000
100
10
VGS
15V
12V
VGS
15V
12V
TOP
TOP
10V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM
BOTTOM
5.0V
1
5.0V
1
0.1
0.01
60µs PULSE WIDTH
Tj = 175°C
≤
60µs PULSE WIDTH
Tj = 25°C
≤
0.1
0.1
1
10
100
0.1
1
10
100
V
, Drain-to-Source Voltage (V)
V
, Drain-to-Source Voltage (V)
DS
DS
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
1000
100
10
3.5
3.0
2.5
2.0
1.5
1.0
0.5
I
= 15A
D
V
= 10V
GS
T = 175°C
J
T
= 25°C
J
1
V
= 50V
DS
≤
60µs PULSE WIDTH
0.1
2
4
6
8
10
12
14
16
-60 -40 -20 0 20 40 60 80 100120140160180
, Junction Temperature (°C)
T
J
V
, Gate-to-Source Voltage (V)
GS
Fig 4. Normalized On-Resistance vs. Temperature
Fig 3. Typical Transfer Characteristics
14.0
100000
10000
1000
100
V
= 0V,
= C
f = 1 MHZ
GS
I = 15A
D
C
C
C
+ C , C
SHORTED
ds
iss
gs
gd
V
= 160V
= 100V
12.0
10.0
8.0
DS
= C
rss
oss
gd
V
DS
= C + C
ds
gd
VDS= 40V
C
iss
6.0
C
oss
4.0
C
rss
2.0
0.0
10
0
5
10
15
20
25
30
35
1
10
100
1000
Q , Total Gate Charge (nC)
G
V
, Drain-to-Source Voltage (V)
DS
Fig 5. Typical Capacitance vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge vs. Gate-to-Source Voltage
www.irf.com
3
IRFR/U4620PbF
1000
100
10
100
OPERATION IN THIS AREA
LIMITED BY R (on)
DS
100µsec
T
= 175°C
1msec
J
T
= 25°C
J
10
10msec
DC
1
Tc = 25°C
Tj = 175°C
Single Pulse
V
= 0V
1.4
GS
0.1
1.0
1
10
100
1000
0.2
0.4
V
0.6
0.8
1.0
1.2
1.6
175
200
V
, Drain-to-Source Voltage (V)
, Source-to-Drain Voltage (V)
DS
SD
Fig 8. Maximum Safe Operating Area
Fig 7. Typical Source-Drain Diode
Forward Voltage
30
25
20
15
10
5
260
250
240
230
220
210
200
190
Id = 5mA
0
25
50
75
100
125
150
-60 -40 -20 0 20 40 60 80 100120140160180
T
, Case Temperature (°C)
T , Temperature ( °C )
J
Fig 10. Drain-to-Source Breakdown Voltage
Fig 9. MaxiCmum Drain Current vs.
Case Temperature
3.0
500
I
D
450
400
350
300
250
200
150
100
50
TOP
2.05A
2.94A
2.5
2.0
1.5
1.0
0.5
0.0
BOTTOM 15A
0
-50
0
50
100
150
25
50
75
100
125
150
175
Starting T , Junction Temperature (°C)
V
Drain-to-Source Voltage (V)
J
DS,
Fig 11. Typical COSS Stored Energy
Fig 12. Maximum Avalanche Energy vs. DrainCurrent
4
www.irf.com
IRFR/U4620PbF
10
1
D = 0.50
0.20
0.10
0.05
R1
R1
R2
R2
0.1
Ri (°C/W) τi (sec)
τ
J τJ
τ
0.456
0.000311
τ
Cτ
0.02
0.01
1 τ1
Ci= τi/Ri
τ
0.589
0.003759
2τ2
0.01
0.001
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
SINGLE PULSE
( THERMAL RESPONSE )
1E-006
1E-005
0.0001
0.001
0.01
0.1
t
, Rectangular Pulse Duration (sec)
1
Fig 13. Maximum Effective Transient Thermal Impedance, Junction-to-Case
100
10
1
Duty Cycle = Single Pulse
Allowed avalanche Current vs avalanche
pulsewidth, tav, assuming ∆Tj = 150°C and
Tstart =25°C (Single Pulse)
0.01
0.05
0.10
Allowed avalanche Current vs avalanche
pulsewidth, tav, assuming ∆Τj = 25°C and
Tstart = 150°C.
0.1
1.0E-06
1.0E-05
1.0E-04
1.0E-03
1.0E-02
1.0E-01
tav (sec)
Fig 14. Typical Avalanche Current vs.Pulsewidth
120
100
80
60
40
20
0
Notes on Repetitive Avalanche Curves , Figures 14, 15:
(For further info, see AN-1005 at www.irf.com)
1. Avalanche failures assumption:
Purely a thermal phenomenon and failure occurs at a temperature far in
excess of Tjmax. This is validated for every part type.
2. Safe operation in Avalanche is allowed as long asTjmax is not exceeded.
3. Equation below based on circuit and waveforms shown in Figures 16a, 16b.
4. PD (ave) = Average power dissipation per single avalanche pulse.
5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase
during avalanche).
6. Iav = Allowable avalanche current.
7. ∆T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as
25°C in Figure 14, 15).
tav = Average time in avalanche.
D = Duty cycle in avalanche = tav ·f
TOP
BOTTOM 1.0% Duty Cycle
= 15A
Single Pulse
I
D
ZthJC(D, tav) = Transient thermal resistance, see Figures 13)
PD (ave) = 1/2 ( 1.3·BV·Iav) = DT/ ZthJC
25
50
75
100
125
150
175
Iav = 2DT/ [1.3·BV·Zth]
Starting T , Junction Temperature (°C)
EAS (AR) = PD (ave)·tav
J
Fig 15. Maximum Avalanche Energy vs. Temperature
www.irf.com
5
IRFR/U4620PbF
90
80
70
60
50
40
30
20
10
0
6.0
5.5
5.0
4.5
4.0
3.5
I = 10A
F
V
= 100V
R
T = 25°C
J
T = 125°C
J
I
I
= 100µA
D
D
3.0
2.5
2.0
1.5
1.0
= 250uA
ID = 1.0mA
ID = 1.0A
0
200
400
600
800
1000
-75 -50 -25
0
25 50 75 100 125 150 175
di /dt (A/µs)
T
, Temperature ( °C )
F
J
Fig. 17 - Typical Recovery Current vs. dif/dt
Fig 16. Threshold Voltage vs. Temperature
2000
90
I = 10A
I = 15A
F
F
1800
1600
1400
1200
1000
800
80
70
60
50
40
30
20
10
0
V
= 100V
V
= 100V
R
R
T = 25°C
T = 25°C
J
J
T = 125°C
J
T = 125°C
J
600
400
200
0
200
400
600
800
1000
0
200
400
600
800
1000
di /dt (A/µs)
di /dt (A/µs)
F
F
Fig. 18 - Typical Recovery Current vs. dif/dt
Fig. 19 - Typical Stored Charge vs. dif/dt
2000
I = 15A
F
V
1800
1600
1400
1200
1000
800
= 100V
R
T = 25°C
J
T = 125°C
J
600
400
200
0
200
400
600
800
1000
di /dt (A/µs)
F
Fig. 20 - Typical Stored Charge vs. dif/dt
6
www.irf.com
IRFR/U4620PbF
Driver Gate Drive
P.W.
P.W.
Period
D.U.T
Period
D =
+
*
=10V
V
GS
Circuit Layout Considerations
• Low Stray Inductance
• Ground Plane
• Low Leakage Inductance
Current Transformer
-
D.U.T. I Waveform
SD
+
-
Reverse
Recovery
Current
Body Diode Forward
Current
di/dt
-
+
D.U.T. V Waveform
DS
Diode Recovery
dv/dt
V
DD
VDD
Re-Applied
Voltage
• dv/dt controlled by RG
RG
+
-
Body Diode
Forward Drop
• Driver same type as D.U.T.
• ISD controlled by Duty Factor "D"
• D.U.T. - Device Under Test
Inductor Current
I
SD
Ripple ≤ 5%
* VGS = 5V for Logic Level Devices
Fig 21. Peak Diode Recovery dv/dt Test Circuit for N-Channel
HEXFET® Power MOSFETs
V
(BR)DSS
15V
t
p
DRIVER
+
L
V
DS
D.U.T
AS
R
G
V
DD
-
I
A
V
2
GS
Ω
0.01
t
p
I
AS
Fig 22b. Unclamped Inductive Waveforms
Fig 22a. Unclamped Inductive Test Circuit
RD
VDS
V
DS
90%
VGS
D.U.T.
RG
+
VDD
-
VGS
10%
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
V
GS
t
t
r
t
t
f
d(on)
d(off)
Fig 23a. Switching Time Test Circuit
Fig 23b. Switching Time Waveforms
Id
Current Regulator
Same Type as D.U.T.
Vds
Vgs
50KΩ
.2µF
12V
.3µF
+
V
DS
D.U.T.
-
Vgs(th)
V
GS
3mA
I
I
D
G
Qgs1
Qgs2
Qgd
Qgodr
Current Sampling Resistors
Fig 24a. Gate Charge Test Circuit
Fig 24b. Gate Charge Waveform
www.irf.com
7
IRFR/U4620PbF
D-Pak (TO-252AA) Package Outline
Dimensions are shown in millimeters (inches)
D-Pak (TO-252AA) Part Marking Information
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
8
www.irf.com
IRFR/U4620PbF
I-Pak (TO-251AA) Package Outline
Dimensions are shown in millimeters (inches)
I-Pak (TO-251AA) Part Marking Information
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
www.irf.com
9
IRFR/U4620PbF
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRL
TRR
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
10
www.irf.com
IRFR/U4620PbF
Orderable part number
Package Type
Standard Pack
Note
Form
Tube/Bulk
Quantity
75
IRFR4620PbF
IRFR4620TRPbF
D-PAK
D-PAK
Tape and Reel
2000
IRFU4620PbF
I-PAK
Tube/Bulk
75
Qualification Information†
Industrial ††
(per JEDEC JESD47F††† guidelines)
Qualification level
Comments: This family of products has passed JEDEC’s Industrial
qualification. IR’s Consumer qualification level is granted by extension of the
higher Industrial level.
MSL1
D-PAK
(per JEDEC J-STD-020D†††
)
Moisture Sensitivity Level
RoHS Compliant
Not applicable
I-PAK
Yes
†
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/product-info/reliability
†† Higher qualification ratings may be available should the user have such requirements. Please contact
your International Rectifier sales representative for further information: http://www.irf.com/whoto-call/salesrep/
††† Applicable version of JEDEC standard at the time of product release.
Notes:
Repetitive rating; pulse width limited by max. junction
temperature.
Limited by TJmax, starting TJ = 25°C, L = 1.0mH
RG = 25Ω, IAS = 15A, VGS =10V. Part not recommended for use
above this value .
ꢀ Coss eff. (TR) is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS
Coss eff. (ER) is a fixed capacitance that gives the same energy as
Coss while VDS is rising from 0 to 80% VDSS
When mounted on 1" square PCB (FR-4 or G-10 Material). For recom
.
.
ISD ≤ 15A, di/dt ≤ 634A/µs, VDD ≤ V(BR)DSS, TJ ≤ 175°C.
Pulse width ≤ 400µs; duty cycle ≤ 2%.
mended footprint and soldering techniques refer to application note #AN-994.
Rθ is measured at TJ approximately 90°C
Data and specifications subject to change without notice
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information. 06/2009
www.irf.com
11
相关型号:
IRFR4620TRLPBF
Power Field-Effect Transistor, 24A I(D), 200V, 0.078ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, ROHS COMPLIANT, DPAK-3
INFINEON
IRFR48ZTRL
Power Field-Effect Transistor, 42A I(D), 55V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, PLASTIC, DPAK-3
INFINEON
IRFR48ZTRLPBF
Power Field-Effect Transistor, 42A I(D), 55V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, LEAD FREE, PLASTIC, DPAK-3
INFINEON
IRFR48ZTRPBF
Power Field-Effect Transistor, 42A I(D), 55V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, LEAD FREE, PLASTIC, DPAK-3
INFINEON
IRFR48ZTRR
Power Field-Effect Transistor, 42A I(D), 55V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, PLASTIC, DPAK-3
INFINEON
IRFR48ZTRRPBF
Power Field-Effect Transistor, 42A I(D), 55V, 0.011ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, LEAD FREE, PLASTIC, DPAK-3
INFINEON
©2020 ICPDF网 联系我们和版权申明