Q67050-A4337-A101 [INFINEON]
IGBT3 Chip; IGBT3芯片型号: | Q67050-A4337-A101 |
厂家: | Infineon |
描述: | IGBT3 Chip |
文件: | 总4页 (文件大小:83K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SIGC28T60
IGBT3 Chip
FEATURES:
This chip is used for:
·
·
·
·
·
·
600V Trench & Field Stop technology
low VCE(sat)
low turn-off losses
short tail current
positive temperature coefficient
easy paralleling
C
·
·
power module
discrete components
Applications:
drives
G
·
E
Chip Type
SIGC28T60
VCE
ICn
50A
Die Size
6.57 x 4.2 mm2
Package
sawn on foil
Ordering Code
Q67050-
A4337-A101
600V
MECHANICAL PARAMETER:
Raster size
6.57 x 4.2
2.166 x 3.401
2.432 x 3.401
mm2
Emitter pad size
Gate pad size
0.817 x 1.52
Area total / active
Thickness
27.6 / 20
70
mm2
µm
Wafer size
150
mm
deg
Flat position
90
Max. possible chips per wafer
Passivation frontside
Emitter metallization
457 pcs
Photoimide
3200 nm AlSiCu
1400 nm Ni Ag –system
suitable for epoxy and soft solder die bonding
Collector metallization
Die bond
electrically conductive glue or solder
Wire bond
Al, <500µm
Reject ink dot size
Æ 0.65mm ; max 1.2mm
store in original container, in dry nitrogen,
< 6 month at an ambient temperature of 23°C
Recommended storage environment
Edited by INFINEON Technologies AI PS DD CLS, L7561A, Edition 2, 27.01.2005
SIGC28T60
MAXIMUM RATINGS:
Parameter
Symbol
VC E
Value
Unit
Collector-emitter voltage, T = 25 °C
600
V
A
j
1 )
DC collector current, limited by T
IC
jmax
Pulsed collector current, tp limited by T
Gate emitter voltage
Icpuls
VGE
150
±20
A
jmax
V
Operating junction and storage temperature
Tj, Ts t g
-40 ... +175
°C
Tvj = 150°C
Tvj = 25°C
6
8
SC data, VGE = 15V, VCC = 360V
tp
µs
1 ) depending on thermal properties of assembly
STATIC CHARACTERISTICS (tested on chip), T =25 °C, unless otherwise specified
j
Value
typ.
Parameter
Symbol
Conditions
Unit
min.
max.
Collector-emitter breakdown voltage
Collector-emitter saturation voltage
Gate-emitter threshold voltage
Zero gate voltage collector current
Gate-emitter leakage current
Integrated gate resistor
V(BR)CES
VCE(sat)
VGE(th)
ICES
VGE=0V , IC= 4mA
VGE=15V, IC=50A
IC=800µA , VGE=VCE
VCE=600V , VGE=0V
VCE=0V , VGE=20V
600
1.05
5.0
V
1.45
5.8
1.85
6.5
2.6
µA
nA
W
IGES
600
RGint
none
ELECTRICAL CHARACTERISTICS (verified by design/characterization):
Value
Parameter
Symbol
Unit
Conditions
min. typ.
3140
max.
Input capacitance
Ciss
Coss
Crss
pF
VC E=25V,
Output capacitance
VGE=0V,
f=1MHz
200
93
Reverse transfer capacitance
SWITCHING CHARACTERISTICS (verified by design/characterization), inductive load
2)
Value
min. typ.
22
Parameter
Symbol
Unit
Conditions
Tj=125° C
VC C =300V,
IC =50A ,
max.
Turn-on delay time
Rise time
td(on)
tr
td(of f )
tf
ns
16
180
50
Turn-off delay time
Fall time
VGE=-15/15V,
RG= 8.2W
2) values also influenced by parasitic L- and C- in measurement and package.
Edited by INFINEON Technologies AI PS DD CLS, L7561A, Edition 2, 27.01.2005
SIGC28T60
CHIP DRAWING:
Edited by INFINEON Technologies AI PS DD CLS, L7561A, Edition 2, 27.01.2005
SIGC28T60
FURTHER ELECTRICAL CHARACTERISTICS:
This chip data sheet refers to the
device data sheet
DESCRIPTION:
AQL 0,65 for visual inspection according to failure catalog
Electrostatic Discharge Sensitive Device according to MIL-STD 883
Test-Normen Villach/Prüffeld
Published by
Infineon Technologies AG,
Bereich Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 2004
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see
address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types
in question please contact your nearest Infineon Technologies Office.
Infineon Technologies components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or
system. Life support devices or systems are intended to be implanted in the human body, or to support
and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
Edited by INFINEON Technologies AI PS DD CLS, L7561A, Edition 2, 27.01.2005
©2020 ICPDF网 联系我们和版权申明