SPHV24-01KTG [LITTELFUSE]
TVS DIODE 24V 50V SOD882;型号: | SPHV24-01KTG |
厂家: | LITTELFUSE |
描述: | TVS DIODE 24V 50V SOD882 电视 |
文件: | 总6页 (文件大小:656K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TVS Diode Array Datasheet
SPHV Series
200W Discrete Unidirectional TVS Diode
RoHS Pb GREEN
Description
The unidirectional SPHV series is designed for use in portable
applications, LED lighting modules, automotive applications, and
low speed I/Os. It will protect sensitive equipment from damage
due to electrostatic discharge (ESD) and other overvoltage
transients.
The SPHV series can safely absorb repetitive ESD strikes above
the maximum level of the IEC 61000-4-2 international standard
(Level 4, ±8kV contact discharge) without performance
degradation and safely dissipate up to 8A (SPHV12) of induced
surge current (IEC 61000-4-5, 2nd Edition tP=8/20μs) with very
low clamping voltages.
Features
■ ESD, IEC 61000-4-2, ±±0kV
contact, ±±0kV air
■ Low clamping voltage
■ Low leakage current
■ EFT, IEC 61000-4-4, 40A
(5/50ns)
Additional Information
■ Small SOD882 packaging
helps save board space
■ Lightning, IEC 61000-4-5,
2nd Edition 8A (tP=8/20μs,
SPHV12)
■ AEC-Q101 qualifie
■ Lead-free, Halogen-free, and
RoHS Compliant
Resources
Accessories
Samples
Applications
■ LED Lighting Modules
■ Portable Instrumentation
■ General Purpose I/O
■ Mobile & Handhelds
■ RS2±2 / RS485
Pinout
■ CAN and LIN Bus
1
Functional Block Diagram
1
2
2
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated.
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD. 04/15/21
1
TVS Diode Array Datasheet
SPHV Series
200W Discrete Unidirectional TVS Diode
Absolute Maximum Ratings
Symbol
Parameter
Value
Units
Ppk
TOP
Peak Pulse Power (tp=8/20μs)
OperatingTemperature
StorageTemperature
200
W
°C
°C
-40 to 125
-55 to 150
TSTOR
Caution: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied.
SPHV12 Electrical Characteristics (TOP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Reverse Standoff Voltage
Breakdown Voltage
VRWM
VBR
IR≤1μA
IR=1mA
12.0
V
V
1±.±
Reverse Leakage Current
ILEAK
VR=12V
1.0
μA
V
IPP=1A, tp=8/20µs, Fwd
IPP=8A, tP=8/20μs, Fwd
TLP, tp=100ns, I/O to GND
tp=8/20µs
19.0
25.0
Clamp Voltage1
VC
V
Dynamic Resistance2
Peak Pulse Current
RDYN
Ipp
0.±7
Ω
8.0
60
A
IEC61000-4-2 (Contact Discharge)
IEC61000-4-2 (Air Discharge)
Reverse Bias=0V, f=1MHz
±±0
±±0
kV
kV
pF
ESD Withstand Voltage1
VESD
Diode Capacitance1
CI/O-GND
Note:
1. Parameter is guaranteed by design and/or device characterization.
2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time.
SPHV15 Electrical Characteristics (TOP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Reverse Standoff Voltage
Breakdown Voltage
VRWM
VBR
IR≤1μA
IR=1mA
15.0
V
V
16.7
Reverse Leakage Current
ILEAK
VR=15V
1.0
μA
V
IPP=1A, tp=8/20µs, Fwd
IPP=5A, tp=8/20µs, Fwd
TLP, tp=100ns, I/O to GND
tp=8/20µs
22.0
28.0
Clamp Voltage1
VC
V
Dynamic Resistance2
Peak Pulse Current
RDYN
Ipp
0.40
Ω
5.0
46
A
IEC61000-4-2 (Contact Discharge)
IEC61000-4-2 (Air Discharge)
Reverse Bias=0V, f=1MHz
±±0
±±0
kV
kV
pF
ESD Withstand Voltage1
VESD
Diode Capacitance1
CI/O-GND
Note:
1. Parameter is guaranteed by design and/or device characterization.
2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time.
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
2
Revised: GD. 04/15/21
TVS Diode Array Datasheet
SPHV Series
200W Discrete Unidirectional TVS Diode
SPHV24 Electrical Characteristics (TOP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Reverse Standoff Voltage
Breakdown Voltage
VRWM
VBR
IR≤1μA
IR=1mA
24.0
V
V
26.7
Reverse Leakage Current
ILEAK
VR=24V
1.0
μA
V
IPP=1A, tp=8/20µs, Fwd
IPP=±A, tp=8/20µs, Fwd
TLP, tp=100ns, I/O to GND
tp=8/20µs
±6.0
50.0
Clamp Voltage1
VC
V
Dynamic Resistance2
Peak Pulse Current
RDYN
Ipp
0.56
Ω
±.0
±2
A
IEC61000-4-2 (Contact Discharge)
IEC61000-4-2 (Air Discharge)
Reverse Bias=0V, f=1MHz
±24
±±0
kV
kV
pF
ESD Withstand Voltage1
VESD
Diode Capacitance1
CI/O-GND
Note:
1. Parameter is guaranteed by design and/or device characterization.
2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time.
SPHV36 Electrical Characteristics (TOP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Reverse Standoff Voltage
Breakdown Voltage
VRWM
VBR
IR≤1μA
IR=1mA
±6.0
V
V
40.0
Reverse Leakage Current
ILEAK
VR=±6V
1.0
μA
V
IPP=1A, tp=8/20µs, Fwd
IPP=2A, tp=8/20µs, Fwd
TLP, tp=100ns, I/O to GND
tp=8/20µs
52.0
60.0
Clamp Voltage1
VC
V
Dynamic Resistance2
Peak Pulse Current
RDYN
Ipp
1.28
Ω
2.0
25
A
IEC61000-4-2 (Contact Discharge)
IEC61000-4-2 (Air Discharge)
Reverse Bias=0V, f=1MHz
±15
±20
kV
kV
pF
ESD Withstand Voltage1
VESD
Diode Capacitance1
CI/O-GND
Note:
1. Parameter is guaranteed by design and/or device characterization.
2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time.
Non-Repetitive Peak Pulse Power vs. PulseTime
Power Derating Curve
10
110
100
90
80
70
60
50
40
30
20
10
0
1
0.1
0.01
0
25
50
75
100
125
150
0.1
1
10
100
1000
Pulse Duration - t (µs)
o
(
p
Ambient Temperature - T
C)
A
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
3
Revised: GD. 04/15/21
TVS Diode Array Datasheet
SPHV Series
200W Discrete Unidirectional TVS Diode
8/20µs PulseWaveform
SPHV12Transmission Line Pulsing(TLP) Plot
110%
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
20
18
16
14
12
10
8
6
4
2
0
0.0
5.0
10.0
15.0
20.0
25.0
30.0
0
5
10
15
20
25
Time (μs)
TLP Voltage (V)
SPHV15Transmission Line Pulsing(TLP) Plot
SPHV24Transmission Line Pulsing(TLP) Plot
20
18
16
14
12
10
8
20
18
16
14
12
10
8
6
6
4
4
2
2
0
0
0
5
10
15
20
25
30
35
40
45
0
5
10
15
20
25
30
TLP Voltage (V)
TLP Voltage (V)
SPHV36Transmission Line Pulsing(TLP) Plot
16
14
12
10
8
6
4
2
0
0
10
20
30
40
50
60
70
80
90
100
TLP Voltage (V)
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
4
Revised: GD. 04/15/21
TVS Diode Array Datasheet
SPHV Series
200W Discrete Unidirectional TVS Diode
Soldering Parameters
Reflow Condition
-Temperature Min (Ts(min)
-Temperature Max (Ts(max)
-Time (min to max) (ts)
Pb – Free assembly
150°C
)
tP
TP
Pre Heat
)
200°C
Critical Zone
L to TP
Ramp-up
60 – 180 secs
TL
TS(max)
Average ramp up rate (Liquidus) Temp (TL) to
peak
tL
±°C/second max
TS(max) toTL - Ramp-up Rate
±°C/second max
217°C
Ramp-down
Preheat
-Temperature (TL) (Liquidus)
Reflow
TS(min)
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
tS
PeakTemperature (TP)
25
Time within 5°C of actual peakTemperature (tp)
Ramp-down Rate
20 – 40 seconds
6°C/second max
8 minutes Max.
260°C
time to peak temperature
Time
Time 25°C to peakTemperature (TP)
Do not exceed
Product Characteristics
Ordering Information
Lead Plating
MatteTin, Pre-Plated Frame
Part Number
Package
Marking
Min. Order Qty.
Lead Material
Substitute Material
Body Material
Copper Alloy
Silicon
Molded Compound
UL Recoginized compound meeting
flammability rating V-0
SPHV12-01ETG
SPHV15-01ETG
SPHV24-01ETG
SPHV±6-01ETG
U2
U5
U4
U6
SOD882
10000
Flammability
Part Marking System
Part Numbering System
–
SPHV
01
E
**
T G
G= Green
1
U
2
*
TVS Diode Arrays
®
(SPA Diodes)
T= Tape & Reel
Voltage
Package
2: SPHV12
5: SPHV15
4: SPHV24
6: SPHV36
Number of
Channels
E: SOD882
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
5
Revised: GD. 04/15/21
TVS Diode Array Datasheet
SPHV Series
200W Discrete Unidirectional TVS Diode
Package Dimensions — SOD882(SPHVxx-01ETG)
Cathode by marking
Package
JEDEC
SOD882
MO-236
Inches
Symbol
Millimeters
Typ
Min
0.90
0.50
0.40
Max
1.10
0.70
0.60
Min
Typ
Max
A
B
C
D
E
F
1.00
0.60
0.50
0.45
0.25
0.50
0.0±7
0.022
0.016
0.0±9
0.024
0.020
0.018
0.010
0.020
0.041
0.026
0.024
0.325
0.325
0.650
0.650
0.975
0.20
0.45
0.±5
0.55
0.008
0.018
0.012
0.022
Recommended Soldering Pad Layout
Embossed Carrier Tape & Reel Specification
Symbol
Millimeters
A
B
C
0.70+/-0.045
1.10+/-0.045
0.65+/-0.045
1.55+/-0.10
d
E
1.75+/-0.05
F
P
P0
P1
W
±.50+/-0.05
2.00+/-0.10
4.00+/-0.10
2.00+/-0.10
8.00 + 0.±0 -0.10
ACCESS HOLE, Ref.
Top mark and pin 1 direction
inTape and Reel
Feeding Direction
14.4mm, Ref.
13mm
1
2
180mm
60mm
8.4mm, Ref.
8mm TAPE AND REEL
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
6
Revised: GD. 04/15/21
相关型号:
SPHV36-01ETG
Trans Voltage Suppressor Diode, 200W, 36V V(RWM), Unidirectional, 1 Element, Silicon, MO-236,
LITTELFUSE
SPHV36-01ETG-C
Trans Voltage Suppressor Diode, 200W, 36V V(RWM), Bidirectional, 1 Element, Silicon, MO-236, GREEN, PLASTIC PACKAGE-2
LITTELFUSE
SPHV36-01KTG
Trans Voltage Suppressor Diode, 200W, 36V V(RWM), Unidirectional, 1 Element, Silicon, MO-236,
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明