TFS175K [MICROSEMI]
SAW Filter, 1 Function(s), 175MHz,;
| 型号： | TFS175K |
| 厂家： | 
Microsemi |
| 描述： | SAW Filter, 1 Function(s), 175MHz, LTE |
| 文件： | 总5页 (文件大小：94K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Filename: tfs 175k.doc
Version 3.0
13.02.2013
Vectron International
Filter specification
TFS 175K
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
23
0
°C
dBm
251 Ω || -12.7 pF
203 Ω || -16.6 pF
Output:
Characteristics
Remark:
The reference level for the relative attenuation a of the TFS175K is the minimum of the pass band attenuation. This value is defined
rel
as the insertion loss a . The nominal frequency f is fixed at 175 MHz without any tolerance. The values of relative attenuation a are
e
N
rel
guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in
the production tolerance scheme.
D a t a
typ. value
tolerance / limit
a
14,8
dB
max.
16
dB
Insertion loss
(reference level)
e
fN
175
MHz
MHz
dB
Nominal frequency
Passband
PB
fN
18,5
0,4
dB
max.
2
Pass band ripple
Bandwidth
41,6
MHz
min.
37
MHz
3 dB
a
Relative attenuation
rel
fN
fN
fN
fN
fN
fN
fN
-
18,5
60
MHz … fN
MHz … fN
MHz … fN
MHz … fN
MHz … fN
MHz … fN
MHz … fN
+
-
18,5
50
MHz
1,6
55
46
9
dB
dB
dB
dB
dB
dB
dB
max.
min.
min.
min.
min.
min.
min.
3
35
30
5
dB
dB
dB
dB
dB
dB
dB
-
MHz
MHz
MHz
MHz
MHz
MHz
-
50
-
31
-
31
-
24
+
+
+
24
+
+
+
31
6
5
31
50
37
39
30
35
50
60
GDR
7
ns
max.
max.
min.
"9
"2,5
6
ns
Group delay ripple in PB *)
Group delay variation (unit to unit) *), **)
ns
7.5
dB
dB
Return loss within PB
Input power level
max.
15
dBm
OTR
- 40 °C ... + 85°C
- 45 °C ... + 85°C
Operating temperature range
Storage temperature range
TC ****)
f
-99
ppm/K
Temperature coefficient of frequency
*) time gating window 0 … 0.5µs
**) Measured at centre frequency, and averaged value to account for unit to unit variation and different bandwidth variants
***) ∆f (Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz).
c
Generated:
Checked / Approved:
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@vectron.com
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 175k.doc
Version 3.0
13.02.2013
Vectron International
Filter specification
TFS 175K
2/5
Filter characteristic
insertion loss: -14.77 dB
0.25
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
0.2452
0.2404
0.2356
0.2308
0.226
0.2212
0.2164
0.2116
0.2068
0.202
200
-10
150
155
160
165
170
175
frequency in MHz
180
185
190
195
125
135
145
155
165
175
frequency in MHz
185
195
205
215
225
Construction and pin connection
(All dimensions in mm)
7
5
1
2
3
4
5
6
7
8
Ground
Output 2
Output 1
Ground
Ground
Input 2
S175K
● D07
Input 1
Ground
1
3
Date code
1
3
Date code: Year + week
D
E
F
2013
2014
2015
...
7
5
1,1
2,54
50 Ω Test circuit
L3
L1
7
3
R2
2
SAW
1:4
1:4
L3
L2
R1
6
L6
L4
1,4,5,8
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@vectron.com
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 175k.doc
Version 3.0
13.02.2013
Vectron International
Filter specification
TFS 175K
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
5. ESD
MIL-STD-883E using coupling network of ISO 10605 and EN 6100-4-2
HBM:250V;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
Tape (all dimensions in mm)
: 12,00
W
Po
PIN Marker
Po
P2
t
Do
:
:
:
:
:
:
:
:
:
:
:
4,00
1,50
1,75
5,50
0,75
2,00
8,00
1,50
5,30
5,30
9,2
Do
E
F
G(min)
P2
P1
D1(min)
Ao
Bo
Ko
Date Code
Typ
D1
Ao
Ct
0,1
W
2
Reel (all dimensions in mm)
A
W1
:330
: 12,4 +2/-0
W2(max) : 18,4
N(min)
C
: 50
: 13,0
C
A
N
W
1
The minimum bending radius is 45 mm.
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@vectron.com
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 175k.doc
Version 3.0
13.02.2013
Vectron International
Filter specification
TFS 175K
4/5
Air reflow temperature conditions
Conditions
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max.
260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@vectron.com
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 175k.doc
Version 3.0
13.02.2013
Vectron International
Filter specification
TFS 175K
5/5
History
Version Reason of Changes
Name
Date
1.0
2.0
- Generation of development specification
- Added time gating window
- Removed triple transit level and triple transit delay
Chilla
09.07.2011
02.11.2012
Chilla
Chilla
3.0
- Created filter specification
- Added terminating impedance
- Added typical values
- Added filter characteristic
- Added test circuit
13.02.2013
- Changed packing
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@vectron.com
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
相关型号：
©2020 ICPDF网 联系我们和版权申明