R8-FST4N [MSYSTEM]
Remote I/O R8 Series DC VOLTAGE/CURRENT INPUT MODULE;
| 型号： | R8-FST4N |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R8 Series DC VOLTAGE/CURRENT INPUT MODULE 输入元件 |
| 文件： | 总5页 (文件大小：288K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R8-FST4N
PC. Please refer to the users manual for the PC configurator
for applicable cable types.
Remote I/O R8 Series
DC VOLTAGE/CURRENT INPUT MODULE
(built-in excitation, 4 points, non-isolated)
Functions & Features
GENERAL SPECIFICATIONS
Connection
• Input: Tension clamp
• DC current input and DC voltage input compact size
remote I/O module
• Excitation supply, internal bus:
Connected to internal bus connector
• Internal power: Via bus connector
• Switching between current input and voltage input with
PC configurator (model: R8CFG)
Isolation: Input or exc. supply to internal bus or internal
power
• Accepts direct input from power output as sensor power
and outputs from terminals
Input type: Configuration mode that selectable between
current input and voltage input and available to configure
scaling individually for each 4 points with configurator
software (model: R8CFG) and fixed input mode that
selectable between 0 - 10 V DC and 4 - 20 mA DC
individually for each 4 points are available.
Module address: With rotary switch
• Each channel is atachable/detachable independently with
separable tension clamp terminal.
12 (.47)
Terminating resistor: Built-in (DIP Switch, default: disable)
Status indicator: Bi-color (red/green) LED; Refer to the
instruction manual.
115 (4.53)
Input status indicators: Red LED; Refer to the instruction
manual.
73 (2.87)
mm (inch)
INPUT SPECIFICATIONS
■ DC Voltage:
• Configuration mode
MODEL: R8-FST4N[1]
Input range: -10 – +10 V DC
Input setting value: Available to set in the input range
Operational range: -5 - +105 % (% of input setting value)
Input resistance: ≥ 1 MΩ
ORDERING INFORMATION
• Code number: R8-FST4N[1]
Specify a code from below for [1].
(e.g. R8-FST4N/Q)
• Fixed input mode
Input range: 0 – 10 V DC
• Specify the specification for option code /Q
(e.g. /C01)
Input setting value: Available to set in the input range
Operational range: -5 - +105 % (% of input setting value)
Input resistance: ≥ 1 MΩ
■ DC Current:
[1] OPTIONS
blank: none
• Configuration mode
Input range: -20 – +20 mA DC
/Q: With options (specify the specification)
Input setting value: Available to set in the input range
Operational range: -5 - +105 % (% of input setting value)
Input resistance: 50 Ω (1/4 W)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Fixed input mode
Input range: 4 – 20 mA DC
/C02: Polyurethane coating
Input setting value: Available to set in the input range
Operational range: -5 - +105 % (% of input setting value)
Input resistance: 50 Ω (1/4 W)
RELATED PRODUCTS
Factory default (Input type and input setting value):
Voltage input, input range -10 - +10 V DC for all 4 points.
• PC configurator software (model: R8CFG)
The configurator software is downloadable at M-System’s
web site.
A dedicated cable is required to connect the module to the
R8-FST4N SPECIFICATIONS
ES-9694 Rev.0 Page 1/5
http://www.m-system.co.jp/
MODEL: R8-FST4N
INSTALLATION
Max. current consumption: 100 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 80 g (0.18 lb)
PERFORMANCE
Conversion accuracy (in percentage of input range)
Voltage input:±0.05 %
Current input:±0.1 %
Conversion accuracy is inversely proportional to input span.
Conversion rate: 8 msec.
Input circuit time constant: Approx. 1 msec.
Data range: 0 – 10000 of the input range
(Scaling of converted data is configurable with the
configurator software)
Data allocation: 2
Module addresses in use: 2
Power output (input connector): Rated current 0.5 A DC per
channel (rated current 3 A for internal fuse (slow blow fuse
i
2
t (A sec.) max. 5.04); Total: 1 A DC
2
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input or exc. supply to internal bus or internal power to
ground)
CALCULATION EXAMPLES OF CONVERSION ACCURACY
■ Voltage input:
For input setting value 1 - 5 V DC
Conversion accuracy = Input range span (20 V) ÷ input
setting value span (4 V) × 0.05 (%) = 0.25 (%)
■ Current input:
For input setting value 4 - 20 mA DC
Conversion accuracy = Input range span (40 mA) ÷ input
setting value span (16 mA) × 0.1 (%) = 0.25 (%)
(Span is common for configuration mode and fixed input
mode)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
R8-FST4N SPECIFICATIONS
ES-9694 Rev.0 Page 2/5
http://www.m-system.co.jp/
MODEL: R8-FST4N
EXTERNAL VIEW
■ LEFT VIEW
■ FRONT VIEW
■ RIGHT VIEW
Module Address Setting
Rotary SW
Status
Indicator LED
0
0
SW1
SW2
5
5
RUN
Input Status
Indicator LEDs
0
5
0
×10 CARD ADD. ×1
5
Internal Bus
Connector
Input Range
Selectors
Input
Connectors
On
SW4
1 2 3 4 5 6 7 8
On
Term
SW3
Terminator
DIP SW
Input Range
Selectors
WIRING
• TENSION CLAMP
Unit side connector: M-System’s product
Cable side connector: DFMC1,5/2-ST-3,5 (Phoenix Contact)
(included in the package)
Applicable wire size: 0.2 - 1.5 mm
2
Stripped length: 10 mm
Recommended solderless terminal
• AI0,25-10YE 0.25 mm
• AI0,34-10TQ 0.34 mm
• AI0,5-10WH 0.5 mm
• AI0,75-10GY 0.75 mm
• A1-10 1.0 mm (Phoenix Contact)
• A1,5-10 1.5 mm (Phoenix Contact)
2
(Phoenix Contact)
2
(Phoenix Contact)
2
(Phoenix Contact)
(Phoenix Contact)
2
2
2
PIN
No.
ID
Ai 1 Input 1 (+)
AG Input 1 (−)
24V Excitation supply (+)
0V Excitation supply (−)
Ai 2 Input 2 (+)
AG Input 2 (−)
24V Excitation supply (+)
0V Excitation supply (−)
Ai 3 Input 3 (+)
AG Input 3 (−)
24V Excitation supply (+)
0V Excitation supply (−)
Ai 4 Input 4 (+)
AG Input 4 (−)
24V Excitation supply (+)
0V Excitation supply (−)
FUNCTION
1
3
2
Ai 1 AG
1
2
4
24V 0V
3
4
5
7
6
Ai 2 AG
5
8
24V 0V
6
7
8
9
10
Ai 3 AG
9
11
12
24V 0V
10
11
12
13
14
15
16
13
14
Ai 4 AG
15
16
24V 0V
R8-FST4N SPECIFICATIONS
ES-9694 Rev.0 Page 3/5
http://www.m-system.co.jp/
MODEL: R8-FST4N
OPERATING MODE SETTING
(*) factory default setting
Note: Be sure to set unused SW4-5 through 4-7 to OFF.
■ Module Address
The left switch determines the tenth place digit, while the
right one does the ones place digit of the module address.
Address is selected between 0 to 30.
(Factory setting: 0)
0
0
5
5
Module Address Setting (x1)
Module Address Setting (x10)
■ Terminator DIP SW
TERMINATOR SW
Without (*)
With
SW3
OFF
ON
■ Input Setting
INPUT 1
INPUT 2
INPUT 3
INPUT 4
SW4-1 SW5-1 SW4-2 SW5-2 SW4-3 SW5-3 SW4-4 SW5-4 SW4-8
MODE
INPUT SETTING
Voltage input (*)
Current input
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
ON
ON
OFF
OFF
Con!guration mode
Fixed input mode
Voltage input 0 – 10V DC
Current input 4 – 20mA DC
EXTERNAL DIMENSIONS unit: mm (inch)
12 (.47)
(3 (.12))
(4 (.16))
73 (2.87)
55 (2.17)
DIN RAIL
(35mm wide)
R8-FST4N SPECIFICATIONS
ES-9694 Rev.0 Page 4/5
http://www.m-system.co.jp/
MODEL: R8-FST4N
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
INDICATOR INPUT STATUS
+24V
+24V
LED
INDICATOR LED
EXC. SUPPLY
*1
Isolation
INPUT CONNECTOR 1
Ai 1
0V
Comm.
Circuit
1
2
3
4
INTERNAL BUS
Control
Circuit
AG
INPUT 1
24V
Power
Circuit
INTERNAL POWER
SETTING
SW
0V
INPUT CONNECTOR 2
Ai 2
5
6
7
8
AG
INPUT 2
24V
0V
INPUT CONNECTOR 3
Ai 3
Input A/D
Converter
9
AG 10
24V 11
0V 12
INPUT 3
INPUT CONNECTOR 4
Ai 4
13
AG 14
24V 15
0V 16
INPUT 4
0V
*1. Fuse is not replaceable.
Specifications are subject to change without notice.
R8-FST4N SPECIFICATIONS
ES-9694 Rev.0 Page 5/5
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明