USB-9211A [NI]
Portable USB-Based DAQ for Thermocouples; 基于USB的便携式数据采集热电偶型号: | USB-9211A |
厂家: | National Instruments |
描述: | Portable USB-Based DAQ for Thermocouples |
文件: | 总2页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Portable USB-Based DAQ for Thermocouples
NI USB-9211A (Windows)
• Small, portable devices
(12.1 by 8.6 by 2.5 cm)
Operating Systems
• Windows Vista/XP/2000
• 4 channels of 24-bit thermocouple input
• Internal cold-junction sensors
• Compatible with J, K, R, S, T, N, E, and B
thermocouple types
• Built-in, removable connectors for easier
and more cost-effective connectivity
• 250 Vrms channel-to-earth
ground isolation
Recommended Software
• LabVIEW
• LabWindows™/CVI
• Measurement Studio
Measurement Services
Software (included)
• NI-DAQmx driver software
• Plug-and-play connectivity via USB
• Bus-powered
• LabVIEW SignalExpress LE
Product
USB-9211A
Signal Type
Thermocouple
Channels (DI)
Input Resolution (bits)
Maximum Sampling Rate (S/s)
Input Range (mV) Operating System
80 Windows
Driver Software1
NI-DAQmx
4
24
12
1For up-to-date information on NI-DAQ, visit ni.com/support/daq/versions.htm.
Table 1. Portable USB DAQ for Thermocouples Selection Guide
Overview
Common Applications
The National Instruments USB-9211A is a data acquisition module with
integrated signal conditioning that provides plug-and-play connectivity
via USB for faster setup and measurements. It is designed especially for
thermocouple measurements with 24 bits of resolution for superior
accuracy and built-in sensors for cold-junction compensation. In addition,
this module includes 250 Vrms channel-to-earth ground isolation for
safety, noise immunity, and high common-mode voltage range.
The USB-9211A is ideal for a number of applications where small size
and portability are essential, such as:
• Portable data logging – log temperature data quickly and easily
• Academic lab use – obtain academic discounts for quantities
of five or more (visit ni.com/academic for details)
• Environmental monitoring – monitor environmental
temperature conditions
• Embedded OEM applications
Software
• In-vehicle data acquisition
The NI USB-9211A uses NI-DAQmx high-performance, multithreaded
driver software for interactive configuration and data acquisition on
Windows OSs. All NI data acquisition devices shipped with NI-DAQmx
also include NI LabVIEW SignalExpress LE configuration-based
data-logging software.
Information for OEM Customers
For information on special configurations and pricing,
visit ni.com/oem.
Recommended Accessories
The USB-9211A has built-in screw-terminal connectivity, so no additional
accessories are required.
Ordering Information
NI USB-9211A (Windows) ....................................................779436-01
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/oem.
NI Services and Support
NI has the services and support to meet
Local Sales and Technical Support
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
SERVICE
NEEDS
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
that identifies individuals who have high levels of skill and knowledge on Trained NI technicians install the software and hardware and configure
using NI products. Visit ni.com/training.
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online
with ni.com/pxiadvisor.
Professional Services
Our NI Professional Services team is composed of NI applications
and systems engineers and a worldwide National Instruments Alliance
Partner program of more than 600 independent consultants and
integrators. Services range
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
from start-up assistance to
turnkey system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
ni.com • 800 813 3693
*351567A-01*
351567A-01
2008-8980-301-101-D-1A
National Instruments • info@ni.com
©2008 National Instruments Corporation. All rights reserved. CVI, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner, NI, ni.com,
SCXI, and SignalExpress are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark
of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies.
A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号:
USB-9215A
Portable USB-Based DAQ with Simultaneous SamplingWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9221
Portable USB-Based DAQ for High VoltagesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9237
Strain- and Bridge-Based MeasurementsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9421
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9472
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9481
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9AB-080-28N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-080-28S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-130-26S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-200-24S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-300-22N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-300-22S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
©2020 ICPDF网 联系我们和版权申明