NJT8306UF [NJRC]
Double Balanced Mixer, 13750MHz Min, 14500MHz Max,;型号: | NJT8306UF |
厂家: | NEW JAPAN RADIO |
描述: | Double Balanced Mixer, 13750MHz Min, 14500MHz Max, 局域网 射频 微波 |
文件: | 总10页 (文件大小:1294K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Released
Ku-band 6W BUC
RF Frequency:
13.75 to 14.5 GHz and 14.0 to 14.5 GHz
Model No. NJT8306 series
RF Frequency
LO Frequency
IF Frequency
:
:
:
14.0 to 14.5 GHz / 13.75 to 14.5 GHz
13.05 GHz / 12.80 GHz
950 to 1,450 MHz / 950 to 1,700 MHz
Output Power @ 1dB G.C.P. :
+37.8 dBm (6W)
IF / Ref. (10MHz) Input :
N-type / F-type, Female Connector
IF Connector
DC Power Input :
Specifications
Rev.01 December 10, 2014
Copyright 2014
New Japan Radio Co., Ltd.
Microwave Components Division
-Notice of Proprietary Information-
This documents and its contents are proprietary to New Japan Radio Co., Ltd.
This publication and its contents may not be reproduced or distributed for any
other purpose without the written permission of New Japan Radio Co., Ltd.
1
Rev.01_Dec.10,2014_NJT8306
Caution
1. NJRC strives to produce reliable and high quality microwave components. NJRC's microwave
components are intended for specific applications and require proper maintenance and handling.
To enhance the performance and service of NJRC's microwave components, the devices,
machinery or equipment into which they are integrated should undergo preventative
maintenance and inspection at regularly scheduled intervals. Failure to properly maintain
equipment and machinery incorporating these products can result in catastrophic system
failures.
2. To ensure the highest levels of reliability, NJRC products must always be properly handled. The
introduction of external contaminants (e.g. dust, oil or cosmetics) can result in failures of
microwave components.
3. NJRC offers a variety of microwave components intended for particular applications. It is
important that you select the proper component for your intended application. You may contact
NJRC's sales office or sales representatives, if you are uncertain about the products listed in the
catalog and the specification sheets.
4. Special care is required in designing devices, machinery or equipment, which demand high levels
of reliability. This is particularly important when designing critical components or systems whose
foreseeable failure can result in situations that could adversely affect health or safety. In
designing such critical devices, equipment or machinery, careful consideration should be given
to, amongst other things, their safety design, fail-safe design, back-up and redundancy systems,
and diffusion design.
5. The products listed in the catalog and specification sheets may not be appropriate for use in
certain equipment where reliability is critical or where the products may be subjected to extreme
conditions. You should consult our sales office or sales representatives before using the products
in any of the following types of equipment.
* Aerospace Equipment
* Equipment Used in the Deep Sea
* Power Generator Control Equipment (nuclear, steam, hydraulic)
* Life Maintenance Medical Equipment
* Fire Alarm/Intruder Detector
* Vehicle Control Equipment (automobile, airplane, railroad, ship, etc.)
* Various Safety Equipment
6. NJRC's products have been designed and tested to function within controlled environmental
conditions. Do not use products under conditions that deviate from methods or applications
specified in the catalog and specification sheets. Failure to employ NJRC's products in the proper
applications can lead to deterioration, destruction or failure of the products. NJRC shall not be
responsible for any bodily injury, fires or accidents, property damage or any consequential
damages resulting from the misuse or misapplication of its products. PRODUCTS ARE SOLD
WITHOUT WARRANTY OF ANY OF KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
7. The product specifications and descriptions listed in the catalog and specification sheets are
subject to change at any time, without notice.
* Above Specifications are subject to change without notice.
2
Rev.01_Dec.10,2014_NJT8306
Model Number
Numbering System
Line-up
* Above Specifications are subject to change without notice.
3
Rev.01_Dec.10,2014_NJT8306
1. Electrical Specifications
1-1.
1-2.
1-3.
Output Frequency Range
<Universal Ku-band>
<Standard Ku-band>
Input Frequency Range
<Universal Ku-band>
<Standard Ku-band>
Maximum IF Input Level
(without damage)
13.75 to 14.5 GHz
14.0 to 14.5 GHz
950 to 1,700 MHz
950 to 1,450 MHz
+13 dBm max.
1-4.
1-5.
Conversion Type
L.O. Frequency
Single, fixed L.O.
<Universal Ku-band>
<Standard Ku-band>
Frequency Sense
Output Power @ 1dB G.C.P. (P1dB)
Linear Gain
Gain Variation over frequency
@ fixed temperature
<Universal Ku-band>
12.80 GHz
13.05 GHz
Positive
+37.8 dBm min. over temperature
62 dB nom., 56 dB min.
1-6.
1-7.
1-8.
1-9.
5 dBp-p max. over 750 MHz
2 dBp-p max. over 54 MHz
5 dBp-p max. over 500 MHz
2 dBp-p max. over 54 MHz
4 dBp-p max.
<Standard Ku-band>
1-10. Gain Stability over temperature
@ fixed frequency
2 dBp-p typ.
1-11. ACPR
-30 dBc typ., -24 dBc min.
@ Pout = +37.8 dBm
1-12. Requirement for External Reference
[Frequency] 10 MHz (sine-wave)
[Input Power] -5 to +5 dBm @ Input port
[Phase Noise] -125 dBc/Hz max. @ 100 Hz
-135 dBc/Hz max. @ 1 kHz
-140 dBc/Hz max. @ 10 kHz
1-13. L.O. Phase Noise
-60 dBc/Hz max. @ 100 Hz
-70 dBc/Hz max. @ 1 kHz
-80 dBc/Hz max. @ 10 kHz
-90 dBc/Hz max. @ 100 kHz
-100 dBc/Hz max. @ 1MHz
1-14. Spurious @ P1dB Output
[in band] -50 dBc max. @ RF Frequency
[in receive band] -70 dBm max. @ 10.95 to 12.75 GHz
[Out-of-band] -50 dBc max.
1-15. Receive Band Noise Density
<Universal Ku-band>
Tx: 14.0 to 14.5 GHz
-156 dBm/Hz max. @10.95 to 12.75 GHz
Tx: 13.75 to 14.0 GHz
-156 dBm/Hz max. @10.95 to 12.25 GHz
-125 dBm/Hz max. @12.25 to 12.75 GHz
Tx: 14.0 to 14.5GHz
<Standard Ku-band>
-156 dBm/Hz max. @ 10.95 to 12.75 GHz
* Above Specifications are subject to change without notice.
4
Rev.01_Dec.10,2014_NJT8306
1-16. Noise Figure
23 dB max.
1-17. Input Impedance
<N-type Model>
<F-type Model>
1-18. Input V.S.W.R.
1-19. Output Load V.S.W.R.
50 ohms nom.
75 ohms nom.
2 : 1 max.
[Recommendation] 1.3 : 1 max.
[Non Damage] 3 : 1 max.
1-20. DC Power Requirement
[Voltage Range] +24 VDC (+12 to +30 VDC)
[Power Consumption] 35 W typ. @ No IF signal
40 W typ., 48 W max. @ Pout = +37.8 dBm
3 W max. @ 10 MHz reference off (Mute on)
Shut off the HPA in case of L.O. unlocked or
no 10 MHz reference signal.
1-21. Mute
1-22. LED Indicator
GREEN: L.O. locked
RED: L.O. unlocked
(or no 10 MHz reference signal)
2. Mechanical Specifications
2-1. Input Interface
<N-type Model>
<F-type Model>
2-2. Output Interface
2-3. Dimension & Housing
IF / Ref. / DC Input:
N-type female connector, 50 ohms
F-type female connector, 75 ohms
Waveguide, WR-75 (with Groove)
174.9 (L) × 84 (W) × 59.2 (H) mm
[6.89” (L) x 3.31” (W) x 2.33” (H)]
without interface connectors and screws
1.2 kg max.
2-4. Weight
[2.6 lbs max.]
3. Environmental Specifications
3-1. Temperature Range (ambient)
[Operating] Operation Guarantee: -40 to +65 ºC
Performance Guarantee: -40 to +60 ºC
[Storage] -40 to +75 ºC
3-2 Humidity
3-3. Altitude
3-4. Vibration
0 to 100 %
15,000 feet (4,572 m)
5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz)
1 mm p-p (3 axis, 5 to 50 Hz)
30 G [294.20 m/s2] (3 axis)
3-5. Shock
3-6 Waterproof / Dustproof (IP Code)
3-7. Regulations
IP 67 *1
EU Directive (CE Marking)
EMC (2004/108/EC)
RoHS (2011/65/EU)
Safety: EN60950-1
3-8. Comply with RoHS (Restricting the use of Hazardous Substances) directives
*1: Conditioned on connection with waveguide.
* Above Specifications are subject to change without notice.
5
Rev.01_Dec.10,2014_NJT8306
4. Outline Drawing
N-type Model
Caution: DO NOT remove the sealing tape on the waveguide. If the sealing tape is removed, it may
lose the performance of waterproof.
* Above Specifications are subject to change without notice.
6
Rev.01_Dec.10,2014_NJT8306
F-type Model
Caution: DO NOT remove the sealing tape on the waveguide. If the sealing tape is removed, it may
lose the performance of waterproof.
* Above Specifications are subject to change without notice.
7
Rev.01_Dec.10,2014_NJT8306
5. Label
Product Label
Definition of Serial Number
* Above Specifications are subject to change without notice.
8
Rev.01_Dec.10,2014_NJT8306
6. Package
Individual Package
* Above Specifications are subject to change without notice.
9
Rev.01_Dec.10,2014_NJT8306
Shipping Package
* Above Specifications are subject to change without notice.
10
Rev.01_Dec.10,2014_NJT8306
相关型号:
©2020 ICPDF网 联系我们和版权申明