74LV4052PW [NXP]
Dual 4-channel analog multiplexer/demultiplexer; 双路4通道模拟多路复用器/多路解复用器型号: | 74LV4052PW |
厂家: | NXP |
描述: | Dual 4-channel analog multiplexer/demultiplexer |
文件: | 总16页 (文件大小:157K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
74LV4052
Dual 4-channel analog
multiplexer/demultiplexer
Product specification
1998 Jun 23
Supersedes data of 1997 Jul 15
IC24 Data Handbook
Philips
Semiconductors
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
FEATURES
DESCRIPTION
The 74LV4052 is a low-voltage CMOS device and is pin and
function compatible with the 74HC/HCT4052.
• Optimized for low voltage applications: 1.0 to 6.0 V
• Accepts TTL input levels between V = 2.7 V and V = 3.6 V
CC
CC
The 74LV4052 is a dual 4-channel analog multiplexer/demultiplexer
with a common select logic. Each multiplexer has four independent
• Low typ “ON” resistance:
60 W at V – V = 4.5 V
cc
EE
inputs/outputs (nY to nY ) and a common input/output (nZ). The
0
3
90 W at V – V = 3.0 V
cc
EE
EE
common channel select logics include two digital select inputs (S
0
145 W at V – V = 2.0 V
cc
and S ) and an active LOW enable input (E).
1
• Logic level translation: to enable 3 V logic to communicate with ± 3
With E LOW, one of the four switches is selected (low impedance
ON-state) by S and S With E HIGH, all switches are in the high
V analog signals
0
1.
• Typical “break before make” built in
• Analog/Digital multiplexing and demultiplexing
• Signal gating
impedance OFF-state, independent of S and S . V and GND are
0
1
CC
the supply voltage pins for the digital control inputs (S , S and E).
0
1
The V to GND ranges are 1.0 to 6.0 V. The analog inputs/outputs
CC
(nY , to nY , and nZ) can swing between V as a positive limit and
0
3
CC
• Output capability: non-standard
V
as a negative limit. V - V may not exceed 6.0 V. For
CC EE
EE
operation as a digital multiplexer/demultiplexer, V is connected to
GND (typically ground).
EE
• I category: MSI
CC
QUICK REFERENCE DATA
GND = 0 V; T
= 25°C; t =t ≤ 2.5 ns
amb
r
f
SYMBOL
PARAMETER
CONDITIONS
TYPICAL
UNIT
Turn “ON” time
E or V
C = 15 pF
L
t
t
/t
30
PZH PZL
S
n
R = 1KW
OS
L
CC
ns
V
= 3.3 V
Turn “OFF” time
E or V
/t
22
PHZ PLZ
S
n
OS
C
C
Input capacitance
3.5
57
I
Power dissipation capacitance per switch See Notes 1 and 2
PD
pF
Maximum switch capacitance
independent (Y) common (Z)
5
12
C
S
NOTES:
1. C is used to determine the dynamic power dissipation (P in µW)
PD
D
ȍ
2
2
P
= C × V
× f ) ((C C ) × V
× f ) where:
D
PD
CC
i
L +
S
CC o
f = input frequency in MHz; C = output load capacity in pF;
i
L
f = output frequency in MHz; C = maximum switch capacitance in pF;
o
S
V
CC
= supply voltage in V;
ȍ
2
((C +C ) × V
× f ) = sum of the outputs.
L
S
CC
o
2. The condition is V = GND to V
.
CC
I
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE OUTSIDE NORTH AMERICA
NORTH AMERICA
Code
16-Pin Plastic DIL
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
74LV4052 N
74LV4052 D
74LV4052 N
74LV4052 D
SOT38-4
SOT109-1
SOT338-1
SOT403-1
16-Pin Plastic SO
16-Pin Plastic SSOP Type II
16-Pin Plastic TSSOP Type I
74LV4052 DB
74LV4052 PW
74LV4052 DB
74LV4052PW DH
PIN CONFIGURATION
PIN DESCRIPTION
PIN NUMBER
SYMBOL
FUNCTION
2Y
2Y
1
2
3
4
5
6
7
8
0
2
16
V
CC
1, 5, 2, 4
2Y , 2Y
Independent inputs/outputs
Enable input (active LOW)
Negative supply voltage
Ground (0 V)
0
3
15 1Y
14 1Y
13 1Z
2
1
6
E
2Z
7
V
EE
2Y
3
1
8
GND
S , S
12
2Y
1Y
0
3
10, 9
Select inputs
0
1
11 1Y
E
12, 14, 15, 11 1Y to 1Y
Independent inputs/outputs
Common inputs/outputs
Positive supply voltage
0
3
10
9
S
S
V
0
1
EE
13, 3
16
1Z, 2Z
GND
V
CC
SV01697
2
1998 Jun 23
853-1999 19618
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
LOGIC SYMBOL
LOGIC SYMBOL (IEEE/IEC)
13
1Z
10
0
1
0
3
4X
9
1Y
12
14
15
11
1
0
1
2
3
0
1
10
S
S
0
1
6
3
1Y
1Y
1Y
2Y
2Y
G4
9
1
MDX
0
1
2
3
5
2
4
5
2Y
2Y
2
4
2
3
12
6
E
2Z
14
15
11
3
13
SV01698
FUNCTION TABLE
INPUTS
SV01699
CHANNEL
ON
E
L
L
L
L
S
1
S
0
L
L
nY – nZ
0
L
H
H
H
L
nY – nZ
1
nY – nZ
2
H
nY – nZ
3
H
X
X
None
NOTES:
1. H = HIGH voltage level
2. L = LOW voltage level
3. X = don’t care
3
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
FUNCTIONAL DIAGRAM
16
1Z
1Y
13
12
V
CC
0
1Y
1
14
15
11
1
1Y
1Y
2Y
2
10
S
S
0
1
3
0
9
LOGIC LEVEL
CONVERSION
1–of–4
DECODER
2Y
5
1
6
E
2Y
2
2
2Y
3
4
3
2Z
V
GND
8
EE
7
SV01700
SCHEMATIC DIAGRAM (ONE SWITCH)
Y
V
CC
V
EE
V
CC
V
CC
V
V
EE
CC
Z
V
from logic
EE
SV01695
4
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
1, 2
ABSOLUTE MAXIMUM RATINGS
In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
DC supply voltage
CONDITIONS
RATING
UNIT
V
V
CC
–0.5 to +7.0
"I
DC input diode current
DC switch diode current
DC switch current
V < –0.5 or V > V + 0.5 V
20
20
mA
mA
mA
°C
IK
I
I
CC
"I
V
S
< –0.5 or V > V + 0.5 V
SK
S
CC
"I
–0.5 V < V < V + 0.5 V
25
S
S
CC
T
stg
Storage temperature range
–65 to +150
Power dissipation per package
– plastic DIL
– plastic mini-pack (SO)
for temperature range: –40 to +125°C
above +70°C derate linearly with 12 mW/K
above +70°C derate linearly with 8 mW/K
above +60°C derate linearly with 5.5 mW/K
750
500
400
P
TOT
mW
– plastic shrink mini-pack (SSOP and TSSOP)
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
CONDITIONS
MIN
1.0
0
TYP
3.3
–
MAX
UNIT
V
CC
DC supply voltage
See Note 1 and Figure 5
6.0
V
V
V
V
I
Input voltage
V
CC
V
CC
V
O
Output voltage
0
–
See DC and AC
characteristics
–40
–40
+85
+125
T
amb
Operating ambient temperature range in free air
°C
V
CC
V
CC
V
CC
= 1.0 V to 2.0 V
= 2.0 V to 2.7 V
= 2.7 V to 6.0 V
–
–
–
–
–
–
500
200
100
t , t
r
Input rise and fall times
ns/V
f
NOTE:
1. The LV is guaranteed to function down to V = 1.0V (input levels GND or V ); DC characteristics are guaranteed from V = 1.2V to V = 6.0V.
CC
CC
CC
CC
5
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions, voltages are referenced to GND (ground = 0 V)
LIMITS
MAX
-40°C to +85°C
-40°C to +125°C
SYMBOL
PARAMETER
TEST CONDITIONS
= 1.2 V
UNIT
1
MIN
0.9
TYP
MIN
0.9
MAX
V
V
V
V
V
V
V
V
V
V
V
V
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
= 2.0 V
1.4
1.4
HIGH level Input
voltage
= 2.7 to 3.6 V
= 4.5 V
2.0
2.0
V
IH
V
3.15
4.20
3.15
4.20
= 6.0 V
= 1.2 V
0.3
0.6
0.3
0.6
= 2.0 V
LOW level Input
voltage
= 2.7 to 3.6 V
= 4.5 V
0.8
0.8
V
IL
V
1.35
1.80
1.0
1.35
1.80
1.0
= 6.0 V
= 3.6
Input leakage
current
±I
±I
V = V or GND
µA
µA
I
I
CC
= 6.0
2.0
2.0
V = V or V
IL
Analog switch
OFF-state current
per channel
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 3.6
1.0
2.0
1.0
2.0
1.0
2.0
40
I
IH
S
IV I = V - GND
S CC
(See Figure 2)
= 6.0
V = V or V
= 3.6
1.0
I
IH
IL
Analog switch
ON-state current
±I
S
µA
IV I = V - GND
(See Figure 3)
S
CC
= 6.0
2.0
V = V or GND;
= 3.6 V
= 6.0 V
I
CC
20.0
40.0
Quiescent supply
current
I
µA
µA
CC
V
V
= GND or V
;
IS
CC
80
= V or GND
OS
CC
Additional
quiescent supply
current per input
∆I
CC
V
= 2.7 to 3.6 V
= 1.2 V
V = V – 0.6 V
500
850
CC
CC
I
CC
V = V or V ;
I
IH
IL
I
= 100 A;
V
m
S
V
V
to GND
IS = CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2.0 V
145
90
80
60
55
325
200
180
135
125
375
235
210
160
145
ON-resistance
(peak)
R
W
ON
= 2.7 V
V = V or V ;
I
IH
IL
I
S
= 1000 A;
= 3.0 to 3.6 V
= 4.5 V
m
V
V
to GND
IS = CC
= 6.0 V
V = V or V
I
IH
IL;
I
V
= 100 A;
V
CC
= 1.2 V
225
m
S
GND
IS =
V
CC
V
CC
V
CC
V
CC
V
CC
= 2.0 V
110
70
60
45
40
235
145
130
100
85
270
165
150
115
100
ON-resistance
(rail)
R
W
ON
= 2.7 V
V = V or V
I
IH
IL;
I
S
= 1000 A;
= 3.0 to 3.6 V
= 4.5 V
m
V
IS =
GND
= 6.0 V
NOTES:
1. All typical values are measured at T
= 25°C.
amb
2. At supply voltages approaching 1.2 V, the analog switch ON-resistance becomes extremely non-linear. Therefore, it is recommended that
these devices be used to transmit digital signals only, when using these supply voltages.
3. R (MAX) data is preliminary.
ON
6
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
DC ELECTRICAL CHARACTERISTICS (Continued)
LIMITS
MAX
-40°C to +85°C
-40°C to +125°C
SYMBOL
PARAMETER
TEST CONDITIONS
UNIT
1
MIN
TYP
MIN
MAX
V = V or V ;
I
IH
IL
I
= 100 A;
V
CC
= 1.2 V
250
W
m
S
V
V
IS = CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 2.0 V
120
75
70
50
45
320
195
175
130
120
370
225
205
150
135
ON-resistance
(rail)
R
ON
= 2.7 V
V = V or V ;
I
IH
IL
I
V
= 1000 A;
= 3.0 to 3.6 V
= 4.5 V
W
m
S
V
IS = CC
= 6.0 V
= 1.2 V
= 2.0 V
5
4
4
3
2
Maximum variation
of ON-resistance
between any two
channels
= 2.7 V
V = V or V
I
IH
IL;
DR
W
ON
V
V
to GND
= 3.0 to 3.6 V
= 4.5 V
IS = CC
= 6.0 V
NOTES:
1. All typical values are measured at T
= 25°C.
amb
2. At supply voltages approaching 1.2 V, the analog switch ON-resistance becomes extremely non-linear. Therefore, it is recommended that
these devices be used to transmit digital signals only, when using these supply voltages.
3. R (MAX) data is preliminary.
ON
LOW
(from select inputs)
HIGH
(from select inputs)
V
nY
n
nZ
nY
n
nZ
A
A
I
V
= 0 to V – V
EE
is
is
CC
VI = VCC or V
V = V or V
O EE CC
EE
V
EE
V
EE
SV01688
SV01660
Figure 1. Test circuit for measuring ON-resistance (R ).
Figure 2. Test circuit for measuring OFF-state current.
ON
HIGH
(from select inputs)
V
= 2.0 V
150
120
R
CC
ON
nY
n
(W)
nZ
V
O
V
= 3.0 V
= 4.5 V
CC
(open circuit)
90
A
60
30
VI = V or V
CC
EE
V
CC
V
EE
0
SV01661
0
1.2
2.4
3.6
V
4.8
Figure 3. Test circuit for measuring ON-state current.
(V)
is
SV01701
Figure 4. Typical ON-resistance (R ) as a function of input
on
voltage (V ) for V = 0 to V – V .
EE
is
is
CC
7
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
V
– GND
(V)
CC
6.0
operating area
4.0
2.0
0
2.0
4.0
6.0
V
– V
EE
CC
(V)
SV01662
Figure 5. Guaranteed operating area as a
function of the supply voltages.
AC CHARACTERISTICS
GND = 0 V; t = t ≤ 2.5ns; C = 50pF
r
f
L
LIMITS
–40 to +85 °C
CONDITION
–40 to +125 °C
SYMBOL
PARAMETER
UNIT
V
(V)
CC
1
OTHER
MIN
TYP
MAX
MIN
MAX
1.2
25
9
2.0
17
13
10
9
20
15
12
10
8
R = ∞;
L
2.7
6
Propagation delay
to V
C = 50 pF
L
t
t
t
t
ns
PHL/ PLH
2
V
is
3.0 to 3.6
4.5
5
os
Figure 12
4
3
6.0
7
1.2
190
65
2.0
121
89
71
60
46
146
108
86
R = 1kW;
L
2.7
48
C = 50 pF
L
Turn-on time
E, S to V
/t
ns
ns
PZH PZL
2
3.0 to 3.6
4.5
36
n
OS
Figures 13
and 1
32
25
73
6.0
56
1.2
125
43
2.0
80
59
48
41
32
95
71
57
49
38
R = 1kW:
L
2.7
33
C = 50 pF
L
Turn-off time
/t
PHZ PLZ
2
E, Sn to V
Figures 13
and 1
3.0 to 3.6
4.5
26
OS
23
18
6.0
NOTES:
1. Unless otherwise stated, all typical values are measured at T
= 25°C
amb
2. Typical values are measured at V = 3.3 V.
CC
8
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
ADDITIONAL AC CHARACTERISTICS
Recommended conditions and typical values
GND = 0 V; t = t ≤ 2.5ns
r
f
SYMBOL
PARAMETER
TYP. UNIT
V
(V)
V
CONDITIONS
R = 10 kW; C = 50 pf
CC
is(p–p)
(V)
Sine-wave distortion
f = 1 kHz
0.80
0.40
%
%
3.0
6.0
2.75
5.50
L
L
Figure 9 and 10
Sine-wave distortion
f = 10 kHz
2.40
1.20
3.0
6.0
2.75
5.50
R = 10 kW; C = 50 pf
L
L
Figure 9 and 10
Switch “OFF” signal feed through
–50
–50
dB
dB
mV
3.0
6.0
Note 1 R = 600 W; C = 50 pf; f= 1 MHz
L L
Figures 5 and 11
Crosstalk between any two
switches/multiplexers
–60
–60
3.0
6.0
Note 1 R = 600 W; C = 50 pf; f= 1 MHz
L
L
Figure 8
V
f
Crosstalk voltage between enable or
address input to any switch
(peak-to-peak value)
110
120
3.0
6.0
R = 600 W; C = 50 pf; f= 1 MHz
L L
(p–p)
(S or E, square wave between V
n
CC
and GND t = t = 6 ns) Figure 8
r
f
Minimum frequency response
(–3 dB)
180
200
MHz
pf
3.0
6.0
Note 2 R = 50 W; C = 50 pF
L L
max
Figures 6, 8 and 9
C
Maximum switch capacitance
5
S
GENERAL NOTES:
1. V is the input voltage at nY or nZ terminal, whichever is assigned as an input.
is
2. V is the output voltage at nY or nZ terminal, whichever is assigned as an output.
OS
NOTES:
1. Adjust input voltage V is 0 dBm level (0 dBm = 1 mW into 600 W).
is
2. Adjust input voltage V is 0 dBm level at V for 1 MHz (0 dBm = 1 mW into 50 W).
is
OS
5
(dB)
0
(dB)
0
–50
–5
10
–100
2
3
4
5
6
10
10
10
10
10
2
3
4
5
6
10
10
10
10
10
10
f (kHz)
f (kHz)
SV01636
SV01635
Figure 6. Typical switch “OFF” signal feed-through as a
function of frequency.
Figure 7. Typical frequency response.
NOTES TO FIGURES 6 AND 7:
Test conditions: V = 3.0 V; GND = 0 V; V = -3.0 V; R = 50 W; R = 1kW.
CC
EE
L
SOURCE
V
V
V
CC
CC
CC
2R
2R
2R
L
L
L
0.1 mF
R
L
nY /nZ
n
nZ/nY
nZ/nY
n
n
nY /nZ
n
V
V
os
is
2R
C
R
2R
C
L
dB
L
L
L
L
channel
ON
channel
OFF
GND
GND
(a)
(b)
SV01663
Figure 8. Test circuit for measuring crosstalk between any two switches.
(a) channel ON condition; (b) channel OFF condition.
9
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
NOTE TO FIGURE 8:
The crosstalk is defined as follows (oscilloscope output):
V
V
CC
CC
S
or E
n
2R
2R
L
L
nY /nZ
n
nZ/nY
n
V(p – p)
DUT
2R
2R
L
C
L
oscilloscope
L
SV01642
GND
V
EE
SV01689
Figure 9. Test circuit for measuring
crosstalk between control and any switch.
NOTE TO FIGURE 9:
Adjust input voltage to obtain 0 dBm at V when F = 1 MHz. After
OS
in
V
CC
set-up frequency of f is increased to obtain a reading of –3 dB at V
in
OS.
2R
L
nY/nZ
0.1 mF
nZ/nY
~
V
is
V
os
sine-wave
2R
C
dB
L
L
channel
ON
GND
SV01667
Figure 10. Test circuit for measuring
minimum frequency response.
V
CC
V
CC
2R
L
nY /nZ
n
10 mF
nZ/nY
n
ꢀ
2R
2R
L
L
0.1 mF
f
= 1 kHz
sine-wave
V
nY /nZ
n
nZ/nY
n
in
os
V
V
is
OS
distortion
meter
2R
C
L
L
channel
ON
C
dB
L
channel
OFF
GND
SV01691
GND
Figure 11. Test circuit for measuring sine-wave distortion.
SV01692
Figure 12. Test circuit for measuring
switch “OFF” signal feed-through.
10
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
WAVEFORMS
NOTES:
1. V = 1.5 V at 2.7 V ≤ V ≤ 3.6 V
M
M
CC
V
= 0.5 × V at 2.7 V > V > 3.6 V
CC CC
2. V and V are the typical output voltage drop that occur with
OL
OH
the output load
3. V = V + 0.3 V at 2.7 V ≤ V ≤ 3.6 V
x
OL
CC
V
X
V
Y
V
Y
= V + 0.1 × V at 2.7 V >V > 3.6 V
OL CC CC
= V – 0.3 V at 2.7 V ≤ V ≤ 3.6 V
OH
CC
= V – 0.1 × V at 2.7 V >V > 3.6 V
OH
CC
CC
V
I
V
I
INPUTS
GND
INPUTS
GND
V
V
M
M
t
t
PZL
PLZ
t
t
PHL
PLH
V
CC
OUTPUT
LOW-to-OFF
OFF-to-LOW
V
OH
V
M
V
V
X
V
OUTPUTS
M
V
OL
t
PZH
t
PHZ
V
OL
V
OH
SV01638
V
Y
OUTPUT
HIGH-to-OFF
OFF-to-HIGH
Figure 13. Input (V ) to output (V ) propagation delays.
M
is
os
GND
outputs
disabled
outputs
enabled
outputs
enabled
SV01640
Figure 14. Turn-on and turn-off times
for the inputs (S , E) to the output (V ).
n
os
TEST CIRCUIT
t
W
V
I
90%
S
90%
1
V
cc
2 ꢀ V
Open
CC
V
V
M
M
NEGATIVE
PULSE
V
10%
10%
90%
EE
0V
(t )
1kW
V
V
O
t
t
(t )
t
TLH
l
THL
TLH
f
r
PULSE
GENERATOR
D.U.T.
(t )
r
t (t )
THL f
V
I
R
T
1kW
50 pF
C
90%
M
L
POSITIVE
PULSE
V
V
M
V
10%
EE
10%
t
W
0V
Test Circuit for Outputs
DEFINITIONS
R = Load resistor
L
C = Load capacitance includes jig and probe capacitance
L
V
CC
V
I
Test
S
1
V
IS
R = Termination resistance should be equal to Z
T
of
OUT
pulse generators.
< 2.7V
V
t
t
t
t
Open
Pulse
CC
PLH/ PHL
2.7 - 3.6V 2.7V
t
2 ꢀ V
V
EE
t = t =6ns, when measuring f there is no constraint on
max,
PLZ/ PZL
CC
r
f
t , t with 50% duty factor.
r
f
> 3.6 V
V
/t
V
EE
V
I
CC
PHZ PZH
SY01738
Figure 15. Load circuitry for switching times.
11
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
12
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
13
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
SOT338-1
14
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
15
1998 Jun 23
Philips Semiconductors
Product specification
Dual 4-channel analog multiplexer/demultiplexer
74LV4052
DEFINITIONS
Data Sheet Identification
Product Status
Definition
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
Objective Specification
Formative or in Design
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Preliminary Specification
Product Specification
Preproduction Product
Full Production
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. PhilipsSemiconductorsmakesnorepresentationorwarrantythatsuchapplicationswillbesuitableforthespecifiedusewithoutfurthertesting
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,
orsystemswheremalfunctionofaPhilipsSemiconductorsandPhilipsElectronicsNorthAmericaCorporationProductcanreasonablybeexpected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Date of release: 05-96
9397-750-04461
Document order number:
Philips
Semiconductors
相关型号:
74LV4052PWDH-T
IC DUAL 4-CHANNEL, DIFFERENTIAL MULTIPLEXER, PDSO16, PLASTIC, TSSOP-16, Multiplexer or Switch
NXP
©2020 ICPDF网 联系我们和版权申明