935271478115 [NXP]
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, 1.50 MM, PLASTIC, SOT-23, SOP-3;型号: | 935271478115 |
厂家: | NXP |
描述: | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, 1.50 MM, PLASTIC, SOT-23, SOP-3 光电二极管 |
文件: | 总16页 (文件大小:207K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
MAX809/MAX810
3-pin microprocessor resets
Product data
2002 Oct 21
Supersedes data of 2002 Jun 20
Philips
Semiconductors
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
DESCRIPTION
FEATURES
The MAX809/MAX810 are single function microprocessor resets
used to monitor supply voltages in microprocessor and other logic
systems. They provide a reset signal to the microprocessor during
power-up, power-down, and brownout conditions. The reset signal is
asserted when the supply voltage drops below the preset threshold,
and the signal is released a set time after the supply voltage has
risen above the preset threshold.
• Monitors 5.0 V, 3.3 V and 3 V supplies
• 140 ms min. reset delay time:
– Active-LOW RESET output (MAX809)
– Active-HIGH RESET output (MAX810)
• Power supply transient immunity
The MAX809 has an active-LOW reset output while the MAX810
has an active-HIGH reset output.
• Guaranteed reset valid for 1.1 V
• Available in small SOT23 and SC70 3-pin packages
• No external components needed
The low supply current of typically 17 µA makes the
MAX809/MAX810 ideal for use in portable, battery operated
equipment. They are available in the 3-pin SOT23 and SC70
packages.
• Specified over full temperature range –40 °C to +105 °C
APPLICATIONS
• Embedded controllers
• Battery operated systems
• Wireless communication systems
• PDAs and handheld equipment
SIMPLIFIED SYSTEM DIAGRAMS
V
V
CC
CC
V
V
V
V
CC
CC
CC
CC
MICROPROCESSOR
MICROPROCESSOR
MAX809
MAX810
RESET
RESET INPUT
GND
RESET
RESET INPUT
GND
GND
GND
SL01642
SL01643
Figure 1. MAX809 simplified system diagram.
Figure 2. MAX810 simplified system diagram.
2
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
ORDERING INFORMATION
PACKAGE
TEMPERATURE
RANGE
TYPE NUMBER
NAME
DESCRIPTION
MAX809xD
MAX810xD
MAX809xW
SOT23-3
SOT23-3
SC70-3
SC70-3
plastic small outline package; 3 leads (see dimensional drawing)
plastic small outline package; 3 leads (see dimensional drawing)
plastic small outline package; 3 leads; body width 1.15 mm
plastic small outline package; 3 leads; body width 1.15 mm
–40 to +105 °C
–40 to +105 °C
–40 to +105 °C
–40 to +105 °C
MAX810xW
NOTE:
Each device has 7 voltage options, indicated by the ‘x’ on the ‘Type number’.
Part number
MAX809
Reset Threshold Voltage (Typical)
Part number
MAX810
Reset Threshold Voltage (Typical)
MAX809ZD,
MAX809ZW
2.32 V
2.63 V
2.93 V
3.08 V
4.00 V
4.38 V
4.63 V
MAX810ZD,
MAX810ZW
2.32 V
2.63 V
2.93 V
3.08 V
4.00 V
4.38 V
4.63 V
MAX809RD,
MAX809RW
MAX810RD,
MAX810RW
MAX809SD,
MAX809SW
MAX810SD,
MAX810SW
MAX809TD,
MAX809TW
MAX810TD,
MAX810TW
MAX809JD,
MAX809JW
MAX810JD,
MAX810JW
MAX809MD,
MAX809MW
MAX810MD,
MAX810MW
MAX809LD,
MAX809LW
MAX810LD,
MAX810LW
PINNING
GND
1
GND
1
3
V
3
V
CC
CC
MAX809
MAX810
RESET
2
RESET
2
SL01641
SL01644
Figure 3. MAX809 pin configuration.
Figure 4. MAX810 pin configuration.
MAX809 pin description
MAX810 pin description
PIN SYMBOL
DESCRIPTION
Device ground.
PIN SYMBOL
DESCRIPTION
Device ground.
1
2
3
GND
1
2
3
GND
RESET
Active-LOW reset signal.
Supply voltage input.
RESET
Active-HIGH reset signal.
Supply voltage input.
V
CC
V
CC
3
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
MAXIMUM RATINGS
SYMBOL
PARAMETER
Supply voltage
CONDITIONS
MIN.
–0.3
–0.3
–0.3
–
MAX.
UNIT
V
V
CC
6.0
V
Input voltage at RESET pin (MAX809)
Input voltage at RESET pin (MAX810)
V
V
+ 0.3
V
i(RESET)
i(RESET)
i(VCC)
o
CC
CC
V
+ 0.3
V
I
I
Input current at V pin
20
mA
mA
V/µs
°C
CC
Output current
–
20
Rate of rise at V
–
100
CC
T
amb
Ambient temperature
Storage temperature
Power dissipation
–40
–65
–
+105
+150
320
T
stg
°C
P
Derate 4 mW/°C above T
= 70 °C
mW
amb
4
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
ELECTRICAL CHARACTERISTICS
V
V
= full range (T
= –40 °C to +105 °C) unless otherwise noted; typical values are at T
= +25 °C, and V = 5 V (J/L/M versions),
amb CC
CC
amb
= 3.3 V (T/S versions), V = 3 V (R version), and V = 2.5 V (Z version) (Note 1).
CC
CC
CC
SYMBOL
PARAMETER
CONDITIONS
MIN.
1.0
1.2
–
TYP.
–
MAX.
5.5
UNIT
V
T
= 0 °C to +70 °C
V
CC
range
amb
T
amb
= –40 °C to +105 °C
–
5.5
V
MAX809J/L/M
MAX810J/L/M
V
T
amb
< 5.5 V;
= –40 °C to +85 °C
24
60
µA
I
Supply current (SOT23-3)
CC
CC
MAX809R/S/T/Z
MAX810R/S/T/Z
V
T
amb
< 3.6 V;
= –40 °C to +85 °C
–
–
–
–
–
–
–
17
–
50
100
100
35
µA
µA
µA
µA
µA
µA
µA
CC
MAX809J/L/M
MAX810J/L/M
V
CC
< 5.5 V;
= +85 °C to +105 °C
T
amb
MAX809R/S/T/Z
MAX810R/S/T/Z
V
CC
< 3.6 V;
= +85 °C to +105 °C
–
T
amb
MAX809J/L/M
MAX810J/L/M
V
CC
< 5.5 V;
= –40 °C to +85 °C
24
17
–
I
Supply current (SC70-3)
CC
T
amb
MAX809R/S/T/Z
MAX810R/S/T/Z
V
CC
< 3.6 V;
= –40 °C to +85 °C
30
T
amb
MAX809J/L/M
MAX810J/L/M
V
CC
< 5.5 V;
= +85 °C to +105 °C
60
T
amb
MAX809R/S/T/Z
MAX810R/S/T/Z
V
CC
< 3.6 V;
= +85 °C to +105 °C
–
60
T
amb
T
= +25 °C
2.28
2.25
2.22
2.59
2.55
2.50
2.89
2.85
2.78
3.04
3.00
2.92
3.93
3.89
3.80
4.31
4.25
4.16
4.56
4.50
4.40
–
2.32
–
2.35
2.38
2.42
2.66
2.70
2.76
2.96
3.00
3.08
3.11
3.15
3.23
4.06
4.10
4.20
4.45
4.50
4.56
4.70
4.75
4.86
–
V
V
th
RESET threshold voltage
(SOT23-3 and SC70-3)
MAX809Z
MAX810Z
amb
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
= +25 °C
V
T
amb
–
V
T
amb
2.63
–
V
MAX809R
MAX810R
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
= +25 °C
V
T
amb
–
V
T
amb
2.93
–
V
MAX809S
MAX810S
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
= +25 °C
V
T
amb
–
V
T
amb
3.08
–
V
MAX809T
MAX810T
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
= +25 °C
V
T
amb
–
V
T
amb
4.00
–
V
MAX809J
MAX810J
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
= +25 °C
V
T
amb
–
V
T
amb
4.38
–
V
MAX809M
MAX810M
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
= +25 °C
V
T
amb
–
V
T
amb
4.63
–
V
MAX809L
MAX810L
T
amb
= –40 °C to +85 °C
= +85 °C to +105 °C
V
V
T
amb
–
Reset threshold temperature
coefficient
30
ppm/°C
V
to RESET delay
V
T
= V to (V – 100 mV)
–
20
240
–
–
µs
ms
ms
ms
ms
CC
CC
th
th
= –40 °C to +85 °C
= +85 °C to +105 °C
= –40 °C to +85 °C
= +85 °C to +105 °C
140
100
140
100
560
840
460
840
RESET active time-out period
(SOT23-3)
amb
T
amb
T
amb
240
–
RESET active time-out period
(SC70-3)
T
amb
5
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
0.3
0.4
0.3
–
UNIT
V
MAX809R/S/T/Z
MAX809J/L/M
MAX809
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
> V
> V
; I
th(min) sink
= 1.2 mA
= 3.2 mA
–
–
–
–
–
–
–
–
–
–
–
V
LOW-level output voltage
on RESET pin
OL(RESET)
; I
V
th(min) sink
> 1.0 V; I
> V
= 50 µA
V
sink
MAX809R/S/T/Z
MAX809J/L/M
MAX810R/S/T/Z
MAX810J/L/M
MAX810
; I
= 500 µA 0.8 × V
V
V
V
V
HIGH-level output voltage
on RESET pin
th(max) source
CC
OH(RESET)
OL(RESET)
OH(RESET)
> V
> V
> V
; I
= 800 µA
V
– 1.5
–
V
th(max) source
CC
; I
= 1.2 mA
= 3.2 mA
–
0.3
0.4
–
V
LOW-level output voltage
on RESET pin
th(max) sink
; I
–
V
th(max) sink
HIGH-level output voltage
on RESET pin
1.8 V < V > V
;
0.8 × V
CC
V
CC
= 150 µA
th(min)
I
source
NOTES:
1. Production testing done at T
= +25 °C; limits over temperature guaranteed by design.
amb
2. RESET output for MAX809; RESET output for MAX810.
6
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
APPLICATION INFORMATION
relatively large resistor from RESET to ground as shown in Figure 6.
100 kΩ is small enough to provide a path for any leakage currents to
flow to ground (holding RESET LOW); while it is large enough not to
load RESET. Conversely, a 100 kΩ pull-up resistor is recommended
Detailed description
A microprocessor reset ensures that the microprocessor starts in a
known and safe state. The reset asserts a reset signal to prevent
code execution errors during power up, power down, or brownout
conditions.
for MAX810 if RESET is required to remain valid for V < 1 V.
CC
A reset must assert an output within a predictable range of the
supply voltage. The common threshold voltage range is between 5%
and 10% of the nominal supply voltage. MAX809/MAX810 have
4.63 V, 3.08 V and 2.63 V options for 5 V, 3.3 V and 3.0 V supplies
respectively. They have high accuracy (within ±3%) that ensures
that the reset thresholds occur within the safe operating range.
Whenever the supply voltage falls below the reset threshold, the
reset signal is asserted. It remains asserted for at least 140 ms after
the supply voltage rises above the threshold. At this point the reset
is released. This delay time helps ensure valid reset signals despite
erratic changes in supply voltage. The MAX809/MAX810 have a
push-pull output stage and do not require a pull-up resistor.
V
CC
V
V
CC
CC
RESET
RESET
MAX809
MICROPROCESSOR
100 kΩ
Negative-going V transients
CC
GND
GND
The MAX809/MAX810 are relatively immune to short negative-going
V
CC
transients and glitches. Figure 5 shows the maximum pulse
width a negative-going transient can have without causing a reset
signal. As the magnitude of the transient increases below the reset
threshold, the maximum allowable pulse width decreases. Typically,
for the 4.0 V, 4.38 V, and 4.63 V versions of the MAX809/MAX810, a
SL01726
Figure 6. RESET valid to V = 0 V circuit.
CC
V
CC
transient that goes 100 mV below the reset threshold and lasts
20 µs or less will not cause a reset signal. To provide additional
transient rejection, connect a 10 nF bypass capacitor as close as
Interfacing to microprocessors with bi-directional
reset pins
possible to the V pin.
CC
Microprocessors with bi-directional reset I/Os, such as the Motorola
68HC11 series, can be connected to the MAX809 RESET output. To
ensure a correct output on the MAX809, even when the
microprocessor reset I/O is in the opposite state, connect a 4.7 kΩ
resistor between the reset pins as shown in Figure 7. This allows the
microprocessor to issue commands to the system regardless of the
state of the RESET. The bi-directional microprocessor reset
functions both as a driven reset input and as an active reset driver.
450
400
350
300
250
200
150
V
CC
MAX809/MAX810J/L/M
100
MAX809/
MAX810R/S/T/Z
50
0
V
V
CC
CC
1
10
100
1000
4.7 kΩ
RESET
RESET
RESET COMPARATOR OVERDRIVE, V – V (mV)
th
CC
SL01728
MAX809
MOTOROLA
68HCxx
Figure 5. Maximum transient duration without causing a
reset pulse versus reset comparator overdrive.
GND
GND
Ensuring a valid reset output down to V = 0 V
CC
When V falls below 1 V, the MAX809 RESET no longer sinks
CC
SL01727
current (i.e., it becomes open circuit). A high impedance CMOS
logic input connected to RESET can drift to undetermined voltages.
In most applications in which the microprocessor circuitry is
inoperative below 1 V, this will not represent a problem. However, in
applications in which RESET must be valid down to 0 V, use a
Figure 7. Interfacing to microprocessor with bi-directional
reset I/O
7
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
PACKING METHOD
The MAX809 and MAX810 are packed in reels, as shown in Figure 8.
GUAR
D
BAND
TAPE
TAPE DETAIL
REEL
AS-
COVER TAPE
SEMBLY
CARRIER TAPE
BAR-
CODE
LABEL
BOX
SL01305
Figure 8. Tape and reel packing method.
8
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
SOT23-3: plastic small outline package; 3 leads; body width 1.5 mm
3
1
2
1.2
1.0
0.55
0.41
0.22
0.08
3.00
2.70
1.70
1.50
0.55
0.35
0.025
1.35
9
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
SC70-3: plastic small outline package; 3 leads; body width 1.15 mm
1.0
0.8
0.4
0.225
2.1
1.9
0.4
0.1
0.25 0.10
10
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
REVISION HISTORY
Rev
Date
Description
_2
20021021
Product data; second version. Supersedes MAX809_MAX810_1 of 2002 June 20 (9397 750 10213).
Engineering Change Notice 853–2355 29047 (date: 20021014).
Modifications:
• Add SC70-3 package.
• Maximum ratings table: from T operating temperature to T
ambient temperature.
opr
amb
_1
20020620
Product data; initial version.
Engineering Change Notice 853–2355 28505 (date: 20020620).
11
2002 Oct 21
Philips Semiconductors
Product data
3-pin microprocessor resets
MAX809/MAX810
Data sheet status
Product
status
Definitions
[1]
Level
Data sheet status
[2] [3]
I
Objective data
Development
Qualification
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Product data
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limitingvaluesdefinition— Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given
in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be
expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree
to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described
or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated
viaaCustomerProduct/ProcessChangeNotification(CPCN).PhilipsSemiconductorsassumesnoresponsibilityorliabilityfortheuseofanyoftheseproducts,conveys
nolicenseortitleunderanypatent, copyright, ormaskworkrighttotheseproducts, andmakesnorepresentationsorwarrantiesthattheseproductsarefreefrompatent,
copyright, or mask work right infringement, unless otherwise specified.
Koninklijke Philips Electronics N.V. 2002
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 10-02
9397 750 10584
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
Information as of 2002-11-15
MAX809/MAX810; 3-pin
microprocessor resets
Download
Stay informed
datasheet
General description
Features
Applications
Datasheet
Buy online
Parametrics
Support & tools
Similar products
Email/translate
Block diagram
Products & packages
Products
MultiMarket
Semiconductors
•
General description
ASICs
•
•
The MAX809/MAX810 are single function microprocessor resets used to monitor supply voltages in microprocessor and other logic systems. They provide a reset signal
to the microprocessor during power-up, power-down, and brownout conditions. The reset signal is asserted when the supply voltage drops below the preset threshold, and
the signal is released a set time after the supply voltage has risen above the preset threshold.
Product Selector
Catalog by
Function
•
Catalog by
System
The MAX809 has an active-LOW reset output while the MAX810 has an active-HIGH reset output.
•
•
•
Cross-reference
End of Life
information
Distributors Go
Here!
The low supply current of typically 17 uA makes the MAX809/MAX810 ideal for use in portable, battery operated equipment. They are available in the 3-pin SOT23 and
SC70 packages.
•
Features
●
●
Monitors 5.0 V, 3.3 V and 3 V supplies
140 ms min. reset delay time:
❍
Active-LOW RESET output (MAX809)
Active-HIGH RESET output (MAX810)
❍
●
●
●
●
●
Power supply transient immunity
Guaranteed reset valid for 1.1 V
Available in small SOT23 and SC70 3-pin packages
No external components needed
Specified over full temperature range –40 Cel to +105 Cel
Applications
●
●
●
●
Embedded controllers
Battery operated systems
Wireless communication systems
PDAs and handheld equipment
Datasheet
Type number
Title
Publication release date
Datasheet status
Page count File size (kB) Datasheet
(Earlier versions)
MAX809/MAX810
3-pin microprocessor resets
21-Oct-02
Product specification
12
92
Download
Parametrics
Type
number
Package Watchdog Operating Reset Part type On/off Active Active Adjustable Adjustable Backup Manual Reset
Operating
Battery Reset Threshold voltage(VDC) product
Threshold Switch Input Range
New
timer
temp.(Cel) delay
chip High Low Reset
Reset
enable
Delay
SOT23-
3 (SO3)
Supervisor,
reset
MAX809JD
MAX809LD
MAX809MD
MAX809RD
MAX809SD
MAX809TD
MAX809ZD
MAX810JD
MAX810LD
MAX810MD
MAX810RD
no
no
no
no
no
no
no
no
no
no
no
-40~105
-40~105
-40~105
-40~105
-40~105
-40~105
-40~105
-40~105
-40~105
-40~105
-40~105
240
240
240
240
240
240
240
240
240
240
240
no
no
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
4.0
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
1.0~5.5
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
SOT23-
3 (SO3)
Supervisor,
reset
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
4.63
4.38
2.63
2.93
3.08
2.32
4.0
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
yes
yes
yes
yes
SOT23-
3 (SO3)
Supervisor,
reset
no
4.63
4.38
2.63
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
no
SOT23-
3 (SO3)
Supervisor,
reset
MAX810SD
MAX810TD
MAX810ZD
no
no
no
-40~105
-40~105
-40~105
240
240
240
no
no
no
yes
yes
yes
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
2.93
3.08
2.32
1.0~5.5
1.0~5.5
1.0~5.5
Yes
Yes
Yes
SOT23-
3 (SO3)
Supervisor,
reset
SOT23-
3 (SO3)
Supervisor,
reset
Products, packages, availability and ordering
Type number North American type number Ordering code (12NC) Marking/Packing
Package
Device status Buy online
IC packing info
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
SOT23-3 (SO3)
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
MAX809JD MAX809JD-G
MAX809LD MAX809LD-G
MAX809MD MAX809MD-G
MAX809RD MAX809RD-G
MAX809SD MAX809SD-G
MAX809TD MAX809TD-G
MAX809ZD MAX809ZD-G
MAX810JD MAX810JD-G
MAX810LD MAX810LD-G
MAX810MD MAX810MD-G
MAX810RD MAX810RD-G
MAX810SD MAX810SD-G
MAX810TD MAX810TD-G
MAX810ZD MAX810ZD-G
9352 713 50115 Standard Marking * Reel Pack, SMD, 7"
9352 713 47115 Standard Marking * Reel Pack, SMD, 7"
9352 713 51115 Standard Marking * Reel Pack, SMD, 7"
9352 713 48115 Standard Marking * Reel Pack, SMD, 7"
9352 713 49115 Standard Marking * Reel Pack, SMD, 7"
9352 713 52115 Standard Marking * Reel Pack, SMD, 7"
9352 713 53115 Standard Marking * Reel Pack, SMD, 7"
9352 714 75115 Standard Marking * Reel Pack, SMD, 7"
9352 714 72115 Standard Marking * Reel Pack, SMD, 7"
9352 714 76115 Standard Marking * Reel Pack, SMD, 7"
9352 714 73115 Standard Marking * Reel Pack, SMD, 7"
9352 714 74115 Standard Marking * Reel Pack, SMD, 7"
9352 714 77115 Standard Marking * Reel Pack, SMD, 7"
9352 714 78115 Standard Marking * Reel Pack, SMD, 7"
Similar products
MAX809/MAX810 links to the similar products page containing an overview of products that are similar in function or related to the type number(s) as listed on
this page. The similar products page includes products from the same catalog tree(s), relevant selection guides and products from the same functional category.
Support & tools
The SA566xx Family New System Resets from Philips Semiconductors
Look Who’s Hatching A New Family of Resets (date 04-Apr-02)
Philips Standard Analog Continues to Improve Our Lives with a New Family of Resets
PMU+ laptop and notebooks (date 25-Sep-20)
PMU+ Desktops, Servers and workstations (date 25-Sep-20)
Email/translate this product information
●
●
Email this product information.
Translate this product information page from English to:
French
Translate
The English language is the official language used at the semiconductors.philips.com website and webpages. All translations on this website are created through the use of
Google Language Tools and are provided for convenience purposes only. No rights can be derived from any translation on this website.
| Copyright © 2002 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
相关型号:
935271488118
AVC SERIES, 18 1-BIT DRIVER, TRUE OUTPUT, PDSO56, 4.40 MM, PLASTIC, MO-194, SOT-481-2, TVSOP-56
NXP
935271490512
IC 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC68, PLASTIC, MS-018, SOT-188-2, LCC-68, Serial IO/Communication Controller
NXP
935271501518
SPECIALTY CONSUMER CIRCUIT, PQFP100, 14 X 20 MM, 2.80 MM HEIGHT, PLASTIC, MO-112, SOT-317-3, QFP-100
NXP
935271530112
IC LOW SKEW CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24, 7.50 MM, PLASTIC, MS-013, SOT-137-1, SO-24, Clock Driver
NXP
935271530118
IC LOW SKEW CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24, 7.50 MM, PLASTIC, MS-013, SOT-137-1, SO-24, Clock Driver
NXP
935271531112
IC LOW SKEW CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24, 5.30 MM, PLASTIC, MO-150, SOT-340-1, SSOP-24, Clock Driver
NXP
935271531118
IC LOW SKEW CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24, 5.30 MM, PLASTIC, MO-150, SOT-340-1, SSOP-24, Clock Driver
NXP
935271533112
IC 256 X 8 EEPROM, 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 7.50 MM, PLASTIC, MS-013, SOT-162-1, SO-16, Parallel IO Port
NXP
935271533118
IC 256 X 8 EEPROM, 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 7.50 MM, PLASTIC, MS-013, SOT-162-1, SO-16, Parallel IO Port
NXP
935271534112
IC 256 X 8 EEPROM, 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 4.40 MM, PLASTIC, MO-153, SOT-403-1, TSSOP-16, Parallel IO Port
NXP
935271534118
IC 256 X 8 EEPROM, 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 4.40 MM, PLASTIC, MO-153, SOT-403-1, TSSOP-16, Parallel IO Port
NXP
935271535112
IC 256 X 8 EEPROM, 8 I/O, PIA-GENERAL PURPOSE, PDSO20, 4.40 MM, PLASTIC, MO-153, SOT-360-1, TSSOP-20, Parallel IO Port
NXP
©2020 ICPDF网 联系我们和版权申明