PESD12VS1UB [NXP]
ESD protection diodes in SOD 523 package; ESD保护二极管SOD 523封装型号: | PESD12VS1UB |
厂家: | NXP |
描述: | ESD protection diodes in SOD 523 package |
文件: | 总15页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PESDxS1UB series
ESD protection diodes in SOD 523 package
Rev. 01 — 14 June 2004
Product data sheet
1. Product profile
1.1 General description
Unidirectional ESD protection diode in a SOD523 plastic package designed to protect one
transmission or data line from the damage caused by ESD (Electro Static Discharge) and
other transients.
1.2 Features
■ Unidirectional ESD protection of one line
■ Max. peak pulse power: PPP = 330 W at tp = 8/20 µs
■ Low clamping voltage: VCL = 20 V at IPP = 18 A
■ Ultra low leakage current: IRM < 700 nA
■ ESD protection > 23 kV
■ IEC 61000-4-2, level 4 (ESD)
■ IEC 61000-4-5 (surge); IPP = 18 A at tp = 8/20 µs.
1.3 Applications
■ Computers and peripherals
■ Communication systems
■ Audio and video equipment
■ Data lines
■ CAN bus protection.
1.4 Quick reference data
Table 1:
Symbol
VRWM
Quick reference data
Parameter
Conditions
Value
Unit
reverse standoff voltage
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
3.3
5
V
V
V
V
V
12
15
24
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
Table 1:
Symbol
Cd
Quick reference data …continued
Parameter
Conditions
VR = 0 V; f = 1 MHz
Value
Unit
diode capacitance
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
207
152
38
32
23
1
pF
pF
pF
pF
pF
number of protected
lines
2. Pinning information
Table 2:
Discrete pinning
Pin
1
Description
cathode
Simplified outline
Symbol
[1]
1
2
1
2
2
anode
sym035
Top view
[1] The marking bar indicates the cathode.
3. Ordering information
Table 3:
Ordering information
Type number Package
Name
Description
Version
PESDxS1UB
SC -79 plastic surface mounted package; 2 leads
SOD523
4. Marking
Table 4:
Marking
Type number
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
Marking code
N1
N2
N3
N4
N5
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
2 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
5. Limiting values
Table 5:
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
[1]
PPP
peak pulse power
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
peak pulse current
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
junction temperature
8/20 µs
-
-
-
-
-
330
260
180
160
160
W
W
W
W
W
[1]
IPP
8/20 µs
-
18
15
5
A
-
A
-
A
-
5
A
-
3
A
Tj
-
150
+150
°C
°C
Tamb
operating ambient
temperature
−65
Tstg
storage temperature
−65
+150
°C
[1] Non-repetitive current pulse 8/20 µs exponentially decay waveform; see Figure 1.
Table 6:
Symbol
ESD
ESD maximum ratings
Parameter
Conditions
Min
Max
Unit
[1]
electrostatic discharge
capability
IEC 61000-4-2
(contact discharge)
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
PESDxS1UB series
-
-
-
-
-
-
30
30
30
30
23
10
kV
kV
kV
kV
kV
kV
HBM MIL-STD883
[1] Device stressed with ten non-repetitive Electro Static Discharge (ESD) pulses; see Figure 2.
Table 7:
ESD standards compliance
ESD Standard
Conditions
IEC 61000-4-2, level 4 (ESD)
HBM MIL-STD883, class 3
> 15 kV (air); > 8 kV (contact)
> 4 kV
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
3 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
001aaa631
I
pp
001aaa630
120
100 %
90 %
100 % I ; 8 µs
pp
I
pp
(%)
80
−t
e
50 % I ; 20 µs
pp
40
10 %
t
t = 0.7 to 1 ns
r
0
30 ns
0
10
20
30
40
t (µs)
60 ns
Fig 1. 8/20 µs pulse waveform according to
Fig 2. Electro Static Discharge (ESD) pulse waveform
according to IEC 61000-4-2.
IEC 61000-4-5.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
4 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
6. Characteristics
Table 8:
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff voltage
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
reverse leakage current
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
breakdown voltage
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
diode capacitance
-
-
-
-
-
-
-
-
-
-
3.3
5
V
V
V
V
V
12
15
24
IRM
VBR
Cd
see Figure 7
VRWM = 3.3 V
VRWM = 5 V
VRWM = 12 V
VRWM = 15 V
VRWM = 24 V
IR = 5 mA
-
-
-
-
-
0.7
0.1
< 1
< 1
< 1
2
µA
µA
nA
nA
nA
1
50
50
50
5.2
5.6
6.0
V
V
V
V
V
6.4
6.8
7.2
14.7
17.6
26.5
15.0
18.0
27.0
15.3
18.4
27.5
VR = 0 V; f = 1 MHz;
see Figure 5 and 6
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
clamping voltage
PESD3V3S1UB
-
-
-
-
-
207
152
38
300
200
75
pF
pF
pF
pF
pF
32
70
23
50
[1]
V(CL)R
IPP = 1 A
IPP = 18 A
IPP = 1 A
IPP = 15 A
IPP = 1 A
IPP = 5A
IPP = 1 A
IPP = 5 A
IPP = 1 A
IPP = 3 A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7
V
V
V
V
V
V
V
V
V
V
20
9
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
20
19
35
23
40
36
70
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
5 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
Table 8:
Characteristics …continued
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Rdiff
differential resistance
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
IR = 1 mA
IR = 1 mA
IR = 1 mA
IR = 1 mA
IR = 0.5 mA
-
-
-
-
-
-
-
-
-
-
400
80
Ω
Ω
Ω
Ω
Ω
200
225
300
[1] Non-repetitive current pulse 8/20 µs exponentially decay waveform; see Figure 1.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
6 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
001aaa147
001aaa193
4
10
1.2
P
pp
P
pp
(W)
P
pp(25˚C)
3
10
0.8
(1)
(2)
2
10
0.4
10
0
2
3
4
1
10
10
10
10
0
50
100
150
200
t
(µs)
T (°C)
j
p
Tamb = 25 °C
tp = 8/20 µs exponentially decay waveform,
see Figure 1.
(1) PESD3V3S1UB and PESD5V0S1UB.
(2) PESD12VS1UB, PESD15VS1UB; PESD24VS1UB.
Fig 3. Peak pulse power dissipation as a function of
pulse time; typical values.
Fig 4. Relative variation of peak pulse power as a
function of junction temperature; typical
values.
001aaa148
001aaa149
240
50
C
d
C
d
(pF)
200
(pF)
40
160
120
80
30
20
10
0
(1)
(2)
(1)
(2)
(3)
40
0
1
2
3
4
5
0
5
10
15
20
25
V
(V)
V (V)
R
R
f = 1 MHz; Tamb = 25 °C
(1) PESD3V3S1UB.
f = 1 MHz; Tamb = 25 °C
(1) PESD12VS1UB.
(2) PESD15VS1UB.
(3) PESD24VS1UB.
(2) PESD5V0S1UB.
Fig 5. Diode capacitance as a function of reverse
voltage; typical values.
Fig 6. Diode capacitance as a function of reverse
voltage; typical values.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
7 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
001aaa270
10
I
R
I
R(25˚C)
(1)
1
−1
10
−100
−50
0
50
100
150
T (°C)
j
(1) PESD3V3S1UB; VRWM = 3.3 V.
PESD5V0S1UB; VRWM = 5 V.
IR is less than 10 nA at 150 °C for:
PESD12VS1UB; VRWM = 12 V.
PESD15VS1UB; VRWM = 15 V.
PESD24VS1UB; VRWM = 24 V.
Fig 7. Relative variation of reverse leakage current as a function of junction temperature; typical values.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
8 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
ESD TESTER
4 GHz DIGITAL
OSCILLOSCOPE
RG 223/U
50 Ω coax
R
Z
450 Ω
10×
ATTENUATOR
C
Z
50 Ω
1
2
D.U.T.: PESDxS1UB
IEC 61000-4-2 network
= 150 pF; R = 330 Ω
C
Z
Z
vertical scale = 20 V/div
horizontal scale = 50 ns/div
vertical scale = 200 V/div
horizontal scale = 50 ns/div
PESD24VS1UB
PESD15VS1UB
PESD12VS1UB
PESD5V0S1UB
GND
GND
GND
GND
GND
PESD3V3S1UB
GND
unclamped +1 kV ESD voltage waveform
clamped +1 kV ESD voltage waveform
(IEC61000-4-2 network)
(IEC61000-4-2 network)
GND
GND
vertical scale = 200 V/div
horizontal scale = 50 ns/div
vertical scale = 10 V/div
horizontal scale = 50 ns/div
unclamped −1 kV ESD voltage waveform
(IEC61000-4-2 network)
clamped −1 kV ESD voltage waveform
(IEC61000-4-2 network)
006aaa001
Fig 8. ESD clamping test set-up and waveforms.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
9 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
7. Application information
The PESDxS1UB series is designed for unidirectional protection of one single data line
from the damage caused by ESD (Electro Static Discharge) and Surge Pulses. The
PESDxS1UB series may be used on lines where the signal polarity is above or below
ground. The PESDxS1UB series provides a surge capability of up to 330 Watts per line for
a 8/20 µs waveform.
line to be protected
line to be protected
(positive signal polarity)
(negative signal polarity)
PESDxS1UB
PESDxS1UB
ground
ground
uni-directional protection of one line
006aaa002
Fig 9. Unidirectional protection of one line.
Circuit board layout and protection device placement:
Circuit board layout is critical for the suppression of ESD, EFT and Surge transients.
The following guidelines are recommended:
1. Place the protection device as close to the input terminal or connector as possible.
2. The path length between the protection device and the protected line should be
minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protection conductors in parallel with unprotected conductor.
5. Minimize all printed-circuit board conductive loops including power and ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer printed-circuit
boards, use ground vias.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
10 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
8. Package outline
Plastic surface mounted package; 2 leads
SOD523
A
c
v
M
A
H
E
A
D
0
0.5
1 mm
scale
1
2
DIMENSIONS (mm are the original dimensions)
b
E
p
UNIT
A
b
c
D
E
H
v
p
E
0.34
0.26
0.17
0.11
0.65
0.58
1.25
1.15
0.85
0.75
1.65
1.55
mm
0.1
(1)
Note
1. The marking bar indicates the cathode.
REFERENCES
JEDEC
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEITA
98-11-25
02-12-13
SOD523
SC-79
Fig 10. Package outline.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
11 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
9. Packing information
Table 9:
Possible packing methods
The indicated -xxx are the last three digits of the 12 NC ordering code. [1]
Type number
Package
Description
Packing quantity
3000
10000
−135
−135
−135
−135
−135
PESD3V3S1UB
PESD5V0S1UB
PESD12VS1UB
PESD15VS1UB
PESD24VS1UB
SOD523
SOD523
SOD523
SOD523
SOD523
4 mm pitch, 8 mm tape and reel −115
4 mm pitch, 8 mm tape and reel −115
4 mm pitch, 8 mm tape and reel −115
4 mm pitch, 8 mm tape and reel −115
4 mm pitch, 8 mm tape and reel −115
[1] For further information see Section 14.
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
12 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
10. Revision history
Table 10: Revision history
Document ID
Release date Data sheet status
Change notice Order number
9397 750 13313
Supersedes
PESDxS1UB_series_1 20040614
Product data
-
-
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
13 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
11. Data sheet status
Level Data sheet status[1] Product status[2] [3]
Definition
I
Objective data
Development
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1]
[2]
Please consult the most recently issued data sheet before initiating or completing a design.
The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3]
For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
12. Definitions
13. Disclaimers
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
14. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 13313
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 01 — 14 June 2004
14 of 15
PESDxS1UB series
Philips Semiconductors
ESD protection diodes in SOD 523 package
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Application information. . . . . . . . . . . . . . . . . . 10
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11
Packing information. . . . . . . . . . . . . . . . . . . . . 12
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 14
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contact information . . . . . . . . . . . . . . . . . . . . 14
3
4
5
6
7
8
9
10
11
12
13
14
© Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release: 14 June 2004
Document order number: 9397 750 13313
Published in The Netherlands
相关型号:
PESD12VS1UJ,115
PESD5V0S1UJ; PESD12VS1UJ - Unidirectional ESD protection for transient voltage suppression SOD 2-Pin
NXP
©2020 ICPDF网 联系我们和版权申明