XS5H-T422-JM0-K [OMRON]
Circular Connector;
| 型号： | XS5H-T422-JM0-K |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Circular Connector 连接器 |
| 文件： | 总8页 (文件大小：1122K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Industrial Ethernet Connectors
XS5@-T / XS6@-T
Support for Ethernet/IP, EtherCAT, and
Other Popular Networks Based on Ethernet
• Combines tough RJ45 Connectors for use outside of panels and
Environment-resistance Connectors with IP67 protection (M12).
• M12 Smartclick mates with any threaded M12 socket and
provides 'twist and click' connection with XS5P-T panel socket.
• M12 Smartclick connectors are shielded to protect against EMI.
• Separate RJ45 assembly connectors are available for easy wiring
on site.
• Uses AWG22 Cat5E cables that are suitable for wiring outside of
panels.
TM
■ Specifications
Cable with Connector Cable with Connectors
on One End (M12)
Cable withConnectors on Cablewith Connectorson RJ45 Assembly M12 Connector for
Type
on Both Ends (M12/M12) Both Ends (M12/RJ45)
Both Ends (RJ45/RJ45)
XS5W-T421-@MD-K
2.5 A
Connector
Panel Mounting
XS5P-T42@-5
3 A
Item / Model
XS5H-T421-@M0-K
XS5W-T421-@M2-K XS5W-T421-@MC-K
XS6G-T421-1
Rated current
3 A
Rated voltage
30 V
Contact resistance 20 mΩ max.
Insulation
resistance
500 MΩ min.
Withstand voltage 1,000 VAC for 60 s (leak current: 1 mA max.)
Ambient operating
temperature
−
25 to 70°C
−
40 to 70°C
40 to 70°C
−
25 to 70°C
25 to 70°C
Ambient storage
temperature
−25 to 70°C
−
−
Degree of
protection
M12: IEC IP67, RJ45: IEC IP20
■ Materials and Finish
Connector
Cable
Item
Model
M12
RJ45
Specifications
UL CM PVC (double shielding) Cat. 5E
Contact Block
PBT plastic (UL94V-0), PA plastic (UL94V-0),
Cores and colors
AWG22 (0.26/7):
Yellow, orange, white, and blue
light gray
black
Contacts Materials
Finish
Phosphor bronze
Outer Diameter
Sheath color
6.5 mm
Nickel base, 0.4-μm
gold-plating
Nickel base, 1.4-μm
gold-plating
Light blue
Fixtures
Cover
Nickel-plated zinc alloy
—
—
—
PBT
O-ring
Rubber
TM
Note:
is a registered trademark of the OMRON Corporation.
Industrial Ethernet Connectors XS5@-T / XS6@-T
1
4-Pin Connectors with Cable Attached
■ XS5H - Plug on One Cable End
TM
XS5H-T421-@M0-K (1 x M12)
Dimensions
(Unit: mm)
L (cable length)
44.7
2
1
14.9 dia.
3
4
M12
D - Coding
Ordering Information
Model
Straight
Type
Cable length L (m)
0.5
1
2
XS5H-T421-BM0-K
XS5H-T421-CM0-K
XS5H-T421-DM0-K
XS5H-T421-EM0-K
XS5H-T421-GM0-K
XS5H-T421-JM0-K
XS5H-T421-KM0-K
Cable with Connector on One End
(M12)
3
5
10
15
Note: Ask your OMRON representative about other specifications.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
6. Cable Length
XS5H - T421 - @M@ -K
A:
B:
C:
D:
E:
0.3 m
0.5 m
1 m
2 m
3 m
G: 5 m
J: 10 m
K: 15 m
1
2 3 4 5
6 7 8
9
1. Type
H:
Connector connected to cable, M12 plug on one cable end
2. Signal type
7. Connections
M: A Yellow, B White, C Orange, D Blue
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
0: One M12 Plug
9. Cable Specifications
K: UL CM PVC (double shielded) / Cat.5E
T:
Ethernet
3. Connector Poles
4:
4 poles
4. Contact Plating
2:
0.4-μm gold plating - M12 connectors
5. Cable Connection Direction
1:
Straight
2
Industrial Ethernet Connectors XS5@-T / XS6@-T
■ XS5W - Plugs on Both Cable Ends
TM
XS5W-T421-@M2-K (2 x M12)
Dimensions
(Unit: mm)
L (cable length)
44.7
44.7
2
1
14.9 dia.
14.9 dia.
3
4
M12
D - Coding
M12
Ordering Information
Model
Straight
Type
Cable length L (m)
0.5
1
2
XS5W-T421-BM2-K
XS5W-T421-CM2-K
XS5W-T421-DM2-K
XS5W-T421-EM2-K
XS5W-T421-GM2-K
XS5W-T421-JM2-K
XS5W-T421-KM2-K
Cable with Connector on Both Ends
(M12 / M12)
3
5
10
15
TM
XS5W-T421-@MC-K (1x M12 and 1x RJ45)
Dimensions
(Unit: mm)
L (cable length)
44.7
54.7
2
1
14.9 dia.
3
4
D - Coding
M12
RJ45
Ordering Information
Model
Straight
Type
Cable length L (m)
0.3
0.5
1
XS5W-T421-AMC-K
XS5W-T421-BMC-K
XS5W-T421-CMC-K
XS5W-T421-DMC-K
XS5W-T421-EMC-K
2
Cable with Connector on Both Ends
(M12 / RJ45)
3
5
XS5W-T421-GMC-K
XS5W-T421-JMC-K
XS5W-T421-KMC-K
10
15
Note: Ask your OMRON representative about other specifications.
Industrial Ethernet Connectors XS5@-T / XS6@-T
3
XS5W-T421-@MD-K (2 x RJ45)
Dimensions
(Unit: mm)
L (cable length)
54.7
54.7
RJ45
RJ45
Ordering Information
Model
Straight
Type
Cable length L (m)
0.3
0.5
1
XS5W-T421-AMD-K
XS5W-T421-BMD-K
XS5W-T421-CMD-K
XS5W-T421-DMD-K
XS5W-T421-EMD-K
XS5W-T421-GMD-K
XS5W-T421-JMD-K
XS5W-T421-KMD-K
2
Cable with Connector on Both Ends
(RJ45 / RJ45)
3
5
10
15
Note: Ask your OMRON representative about other specifications.
Model Number Legend
Use this model number legend to identify products from their model number.
When ordering, use a model number from the table in Ordering Information.
6. Cable Length
XS5W - T421 - @M@ -K
A:
B:
C:
D:
E:
0.3 m
0.5 m
1 m
2 m
3 m
G: 5 m
J: 10 m
K: 15 m
1
2 3 4 5
6 7 8
9
1. Type
W:
2. Signal type
Connector connected to cable, plugs on both cable ends
7. Connections
M: A Yellow, B White, C Orange, D Blue
(Numbers inside circles are terminal numbers)
8. Connectors on One End/Both Ends
T:
Ethernet
3. Connector Poles
4:
4. Contact Plating
2: 0.4-μm gold plating - M12 connectors
1.4 μm gold plating - RJ45 connectors
5. Cable Connection Direction
1: Straight
4 poles
2:
Two M12 Plugs
C:
D:
One M12 Plug + One RJ45 Plug
Two RJ45 Plugs
9. Cable Specifications
K: UL CM PVC (double shielded) / Cat.5E
4
Industrial Ethernet Connectors XS5@-T / XS6@-T
Assembly Connector - RJ45
■ XS6G - Plugs
XS6G-T421-1
Dimensions
(Unit: mm)
52.6
Applicable wires
6.1 to 6.9 dia.
Stranded wires: AWG22 to AWG24
Solid wires: AWG22 to AWG23
11.8
8.1
11.3
Contact 6
Contact 3
Contact 1
Contact 2
Ordering Information
Model
Straight
Type
Cable length L (m)
RJ45 Assembly Connector
- - -
XS6G-T421-1
4-Pin Panel-mount Connectors
■ XS5P - Sockets
XS5P-T42@-5 (Rear or Front locking M12 socket)
Dimensions
(Unit: mm)
Wiring
XS5P-T426-5 (Rear Locking)
Terminal No.
Color
Yellow
White
Orange
Blue
M12
PG9
18
17
2.8
2.5
1
2
3
4
Orange
White
500
18
14.6 dia.
20
Yellow
Blue
(20)
3
10
11.9
Panel Cutout Dimension
D - Coding
22.1
15.3 +0.1
dia.
0
XS5P-T427-5 (Front Locking)
Panel thickness (t)
= 1 to 4
M12
2.8
17
18
PG9
500
Orange
White
Note 1: The panel cutout dimen-
sion is the same for
Front-locking and Rear-
locking Connectors.
Note 2: Rotational positioning is
not possible for connec-
tor rotation.
20
13.9 dia.
18
Blue
(20)
3
10
Yellow
2.5
D - Coding
10.5
22.1
Ordering Information
Type
Model
Straight
Cable length L (m)
Rear Locking
Front Locking
0.5 m
0.5 m
XS5P-T426-5
XS5P-T427-5
M12 Connector for Panel Mounting
Industrial Ethernet Connectors XS5@-T / XS6@-T
5
Precautions
■ Correct Use
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
■ General Precautions
•
Do not pull excessively on the Connectors or cables. Do not install
the Connectors or cables in any way that would place a load
directly on the mating section or cable connections. Doing so can
damage the Connectors or break the wires inside the cables.
Connector Connection and Disconnection
•
When connecting or disconnecting Connectors, be sure to hold the
Connectors by hand.
• Install the Connectors and cables where they will not be stepped
on to prevent the wires inside the cables from being broken and to
prevent the Connectors from being damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.
• Do not hold the cable when disconnecting Connectors.
•
When mating Connectors, be sure to insert the plug all the way to
the back of the socket before attempting to lock the Connectors.
• Refer to the specifications for your cables before bending the
cables and do not bend them past their minimum bending radius.
• Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.
Wiring
• Lay the cables so that external force is not applied to the
Connectors. Otherwise, the degree of protection (IP67) may not
be achieved.
Degree of Protection
• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not the Connectors underwater.
•
Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors
.
6
Industrial Ethernet Connectors XS5@-T / XS6@-T
MEMO
Industrial Ethernet Connectors XS5@-T / XS6@-T
7
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
11/10
Specifications subject to change without notice
Printed in USA
Cat. No. G019-E-01
8
Industrial Ethernet Connectors XS5@-T / XS6@-T
相关型号：
©2020 ICPDF网 联系我们和版权申明