FAN53600 [ONSEMI]
3 MHz, 600 mA / 1A Synchronous Buck Regulator;![FAN53600](http://pdffile.icpdf.com/pdf2/p00333/img/icpdf/FAN53600AUC2_2050321_icpdf.jpg)
型号: | FAN53600 |
厂家: | ![]() |
描述: | 3 MHz, 600 mA / 1A Synchronous Buck Regulator |
文件: | 总16页 (文件大小:1176K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
March 2016
FAN53600 / FAN53610
3 MHz, 600 mA / 1A Synchronous Buck Regulator
Features
Description
The FAN53600/10 is a 3 MHz step-down switching voltage
regulator, available in 600 mA or 1 A options, that delivers a
fixed output from an input voltage supply of 2.3 V to 5.5 V.
.
.
.
.
.
.
.
.
.
.
.
.
.
600 mA or 1 A Output Current Capability
26 µA Typical Quiescent Current
3 MHz Fixed-Frequency Operation
Best-in-Class Load Transient Response
Best-in-Class Efficiency
Using
a
proprietary architecture with synchronous
rectification, the FAN53600/10 is capable of delivering a
peak efficiency of 97%.
The regulator operates at a nominal fixed frequency of
3 MHz, which reduces the value of the external components
to as low as 1 µH for the output inductor and 10 µF for the
output capacitor. In addition, the Pulse-Width Modulation
(PWM) modulator can be synchronized to an external
frequency source.
2.3 V to 5.5 V Input Voltage Range
Low Ripple Light-Load PFM Mode
Forced PWM and External Clock Synchronization
Internal Soft-Start
At moderate and light-loads, Pulse Frequency Modulation
(PFM) is used to operate the device in Power-Save Mode
with a typical quiescent current of 26 µA. Even with such a
low quiescent current, the part exhibits excellent transient
response during large load swings. At higher loads, the
system automatically switches to fixed-frequency control,
operating at 3 MHz. In Shutdown Mode, the supply current
drops below 1 µA, reducing power consumption. For
applications that require minimum ripple or fixed frequency,
PFM Mode can be disabled using the MODE pin.
Input Under-Voltage Lockout (UVLO)
Thermal Shutdown and Overload Protection
Optional Output Discharge
6-Bump WLCSP, 0.4 mm Pitch
Applications
.
.
.
.
3G, 4G, WiFi®, WiMAX™, and WiBro® Data Cards
Tablets
The FAN53600/10 is available in 6-bump, 0.4 mm pitch,
Wafer-Level Chip-Scale Package (WLCSP).
DSC, DVC
Netbooks®, Ultra-Mobile PCs
MODE
VIN
EN
A1
B1
C1
A2
B2
C2
L1
CIN
2.2F
SW
All trademarks are the property of their respective owners.
FB
GND
COUT
F
Figure 1. Typical Application
Ordering Information
Output
Max. Output
Current
Active
Temperature
Part Number
Package
Range
Packing
Voltage(1)
Discharge(2)
FAN53600AUC28X
2.8 V
2.9 V
3.0 V
3.3 V
3.3 V
600 mA
1 A
Yes
Yes
Yes
Yes
Yes
FAN53610AUC29X
FAN53610AUC30X
FAN53600AUC33X
FAN53610AUC33X
Notes:
WLCSP-6,
–40 to +85°C
0.4 mm Pitch
Tape and
Reel
1 A
600 mA
1 A
1. Other voltage options available on request. Contact a Fairchild representative.
2. All voltage and output current options are available with or without active discharge. Contact a Fairchild representative.
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
Pin Configurations
A2
B2
C2
A1
B1
C1
A1
B1
C1
A2
B2
C2
VIN
EN
MODE
SW
MODE
SW
VIN
EN
FB
GND
GND
FB
Figure 2. Bumps Facing Down
Figure 3. Bumps Facing Up
Pin Definitions
Pin #
Name
Description
MODE. Logic 1 on this pin forces the IC to stay in PWM Mode. Logic 0 allows the IC to automatically
A1
MODE switch to PFM Mode during light loads. The regulator also synchronizes its switching frequency to
two times the frequency provided on this pin. Do not leave this pin floating.
Switching Node. Connect to output inductor.
B1
C1
C2
SW
FB
Feedback. Connect to output voltage.
Ground. Power and IC ground. All signals are referenced to this pin.
GND
Enable. The device is in Shutdown Mode when voltage to this pin is <0.4 V and enabled when
>1.2 V. Do not leave this pin floating.
B2
A2
EN
Input Voltage. Connect to input power source.
VIN
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above
the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended
exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings
are stress ratings only.
Symbol
VIN
Parameter
Min.
Max.
Unit
Input Voltage
–0.3
–0.3
–0.3
–0.3
7.0
V
V
V
V
VSW
Voltage on SW Pin
EN and MODE Pin Voltage
Other Pins
VIN + 0.3(3)
VIN + 0.3(3)
VIN + 0.3(3)
VCTRL
Human Body Model per JESD22-A114
Charged Device Model per JESD22-C101
2.0
1.5
Electrostatic Discharge
Protection Level
ESD
kV
TJ
TSTG
TL
Junction Temperature
Storage Temperature
–40
–65
+150
+150
+260
°C
°C
°C
Lead Soldering Temperature, 10 Seconds
Note:
3. Lesser of 7 V or VIN+0.3 V.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating
conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding
them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
2.3
0
Typ.
Max.
5.5
600
1
Unit
V
VCC
Supply Voltage Range
Output Current
FAN53600
FAN53610
mA
A
IOUT
0
L
CIN
COUT
TA
Inductor
1
µH
µF
µF
°C
°C
Input Capacitor
2.2
10
Output Capacitor
Operating Ambient Temperature
Operating Junction Temperature
–40
–40
+85
TJ
+125
Thermal Properties
Junction-to-ambient thermal resistance is a function of application and board layout. This data is measured with four-layer 2s2p
boards (no vias) in accordance to JEDEC standard JESD51. Special attention must be paid not to exceed junction temperature
TJ(max) at a given ambient temperature TA.
Symbol
Parameter
Typical
Unit
Junction-to-Ambient Thermal Resistance
125
°C/W
JA
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
3
Electrical Characteristics(5)
Minimum and maximum values are at VIN = VEN = 2.3 V to 5.5 V, VMODE = 0 V (AUTO Mode), and TA = -40°C to +85°C; circuit of
Figure 1, unless otherwise noted. Typical values are at TA = 25°C, VIN = VEN = 3.6 V.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
Power Supplies
No Load, Not Switching
PWM Mode
26
3
µA
mA
µA
V
IQ
Quiescent Current
I(SD)
Shutdown Supply Current
VIN = 3.6 V, EN = GND
0.25
2.15
200
1.00
2.27
VUVLO Under-Voltage Lockout Threshold Rising VIN
VUVHYST Under-Voltage Lockout Hysteresis
Logic Inputs: EN and MODE Pins
mV
VIH
VIL
Enable HIGH-Level Input Voltage
Enable LOW-Level Input Voltage
1.2
V
V
0.4
VLHYST Logic Input Hysteresis Voltage
IIN
Enable Input Leakage Current
Switching and Synchronization
100
mV
µA
Pin to VIN or GND
0.01
1.00
fSW
Oscillator Frequency(4)
MODE Synchronization Range(4)
VIN = 3.6 V, TA = 25°C
2.7
1.3
3.0
1.5
3.3
1.7
MHz
MHz
fSYNC
Square Wave at MODE Input
Regulation
ILOAD = 0 to 600 mA, VIN = 3.8 V
ILOAD = 0 to 600 mA, VIN = 5.0 V
ILOAD = 0 to 1000 mA, VIN = 3.8 V
ILOAD = 0 to 1000 mA, VIN = 5.0 V
ILOAD = 0 to 1000 mA, VIN = 3.8 V
ILOAD = 0 to 1000 mA, VIN = 5.0 V
ILOAD = 0 to 1000 mA, VIN = 3.8 V
2.702
2.702
2.797
2.790
2.891
2.891
3.171
2.898
2.898
3.003
3.010
3.110
3.110
3.430
2.800 V
2.900 V
3.000 V
Output Voltage
Accuracy
VO
V
3.300 V
ILOAD = 0 to 1000 mA, VIN = 5.0 V
3.192
3.409
300
VIN = 3.8 V, ILOAD = 10 mA, From
EN Rising Edge
tSS
Soft-Start
180
175
µs
Output Driver
PMOS On Resistance
NMOS On Resistance
VIN = VGS = 3.6 V
VIN = VGS = 3.6 V
m
RDS(on)
165
1100
1750
230
m
mA
mA
FAN53600
FAN53610
EN = GND
900
1250
2000
VIN = 3.6 V,
TA = 25°C
ILIM(OL) PMOS Peak Current Limit
1500
RDIS
TTSD
Output Discharge Resistance
Thermal Shutdown
CCM Only
150
15
°C
°C
THYS
Thermal Shutdown Hysteresis
Notes:
4. Close-Loop Switching frequency may be limited by the effect of tOFF minimum (see Operation Description section).
5. The Electrical Characteristics table reflects open-loop data. Refer to Operation Description and Typical Characteristics
Sections for closed loop data
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
4
Typical Performance Characteristics
Unless otherwise noted, VIN = VEN = 3.6 V, VMODE = 0 V (AUTO Mode), and TA = 25°C.
98%
95%
92%
89%
86%
83%
80%
100%
95%
90%
85%
80%
75%
70%
- 40C, AUTO
+25C, AUTO
+85C, AUTO
- 40C, PWM
+25C, PWM
+85C, PWM
3.6 VIN
4.2 VIN
5.0 VIN
5.5 VIN
0
200
400
600
800
1000
0
200
400
600
800
1000
Load Current (mA)
Load Current (mA)
Figure 4. Efficiency vs. Load Current and Input
Voltage, VOUT=3.3 V, Dotted for Decreasing Load
Figure 5. Efficiency vs. Load Current and
Temperature VIN=5 V, VOUT=3.3 V, Dotted for FPWM
98%
95%
92%
89%
86%
100%
95%
90%
85%
80%
- 40C, AUTO
+25C, AUTO
+85C, AUTO
- 40C, PWM
+25C, PWM
3.2 VIN
3.6 VIN
4.2 VIN
83%
75%
5.0 VIN
+85C, PWM
80%
70%
0
200
400
600
800
1000
0
200
400
600
800 1000
Load Current (mA)
Load Current (mA)
Figure 6. Efficiency vs. Load Current and Input
Voltage, VOUT=2.9 V, Dotted for Decreasing Load
Figure 7. Efficiency vs. Load Current and
Temperature, VOUT=2.9 V, Dotted for FPWM
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
5
Typical Performance Characteristics (Continued)
Unless otherwise noted, VIN = VEN = 3.6 V, VMODE = 0 V (AUTO Mode), and TA = 25°C.
3
2
3
2
3.2VIN, AUTO
3.6VIN, AUTO
4.2VIN, AUTO
5.0VIN, AUTO
3.2VIN, PWM
3.6VIN, PWM
4.2VIN, PWM
5.0VIN, PWM
3.6VIN, AUTO
4.2VIN, AUTO
5.0VIN, AUTO
5.5VIN, AUTO
3.6VIN, PWM
4.2VIN, PWM
5.0VIN, PWM
5.5VIN, PWM
1
1
0
0
-1
-2
-3
-1
-2
-3
0
200
400
600
800
1000
0
200
400
600
800
1000
Load Current (mA)
Load Current (mA)
Figure 8. ∆VOUT (%) vs. Load Current and Input
Voltage, VOUT=2.9 V, Normalized to 3.6 VIN, 500 mA
Load, FPWM, Dotted for Auto Mode
Figure 9. ∆VOUT (%) vs. Load Current and Input
Voltage, VOUT=3.3 V, Normalized to 3.6 VIN, 500 mA
Load, FPWM, Dotted for Auto Mode
500
400
300
200
500
400
300
200
100
100
PWM
PWM
PFM
PFM
100% d.c.
100% d.c.
0
0
2.9
3.4
3.9
4.4
4.9
5.4
3.3
3.8
4.3
4.8
5.3
Input Voltage (V)
Input Voltage (V)
Figure 10. PFM / PWM /100% Duty Cycle Boundary
vs. Input Voltage, VOUT=2.9 V
Figure 11. PFM / PWM /100% Duty Cycle Boundary
vs. Input Voltage, VOUT=3.3 V
40
35
30
25
25
20
15
10
20
- 40C, EN=VIN
+25C, EN=VIN
+85C, EN=VIN
- 40C, EN=1.8V
5
15
- 40C
+25C
+25C, EN=1.8V
+85C, EN=1.8V
+85C
10
0
2.5
3.0
3.5
4.0
4.5
5.0 5.5
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Input Voltage (V)
Input Voltage (V)
Figure 12. Quiescent Current vs. Input Voltage and
Temperature, VOUT=2.9 V, EN=VIN Solid, Dotted for
EN=1.8 V
Figure 13. Quiescent Current vs. Input Voltage and
Temperature, VOUT=2.9 V, Mode=EN=VIN (FPWM)
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
6
Typical Performance Characteristics (Continued)
Unless otherwise noted, VIN = VEN = 3.6 V, VMODE = 0 V (AUTO Mode), and TA = 25°C.
Figure 14. Output Ripple vs. Load Current and Input
Voltage, VOUT=2.9 V, FPWM, Dotted for Auto Mode
Figure 15. Output Ripple vs. Load Current and Input
Voltage, VOUT=3.3 V, FPWM, Dotted for Auto Mode
3,500
3,000
3,500
3,000
2,500
2,500
3.6VIN, AUTO
3.6VIN, AUTO
2,000
2,000
3.2VIN, AUTO
5.0VIN, AUTO
3.6VIN, AUTO
3.6VIN, PWM
1,500
1,500
4.2VIN, PWM
5.0VIN, AUTO
5.0VIN, PWM
3.2VIN, PWM
1,000
1,000
3.6VIN, PWM
5.0VIN, PWM
500
500
0
0
0
200
400
600
800
1000
0
200
400
600
800
1000
Load Current (mA)
Load Current (mA)
Figure 16. Frequency vs. Load Current and Input
Voltage, VOUT=2.9 V, Auto Mode, Dotted for FPWM
Figure 17. Frequency vs. Load Current and Input
Voltage, VOUT=3.3 V, Auto Mode, Dotted for FPWM
Figure 18. Load Transient, VIN=5 V, VOUT=3.3 V,
10-200-10 mA, 100 ns Edge
Figure 19. Load Transient, VIN=5 V, VOUT=3.3 V, 200-
800-200 mA, 100 ns Edge
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
7
Typical Performance Characteristics (Continued)
Unless otherwise noted, VIN = VEN = 3.6 V, VMODE = 0 V (AUTO Mode), and TA = 25°C.
Figure 20. Load Transient, VIN=5 V, VOUT=2.9 V,
10-200-10 mA, 100 ns Edge
Figure 21. Load Transient, VIN=5 V, VOUT=2.9 V,
200-800-200 mA, 100 ns Edge
Figure 22. Line Transient, 3.3-3.9-3.3 VIN, 10 µs Edge,
VOUT=2.9 V, 58 mA Load
Figure 23. Line Transient, 3.3-3.9-3.3 VIN, 10 µs Edge,
VOUT=2.9 V, 600 mA Load
Figure 24. Combined Line / Load Transient,
VOUT=2.9 V, 3.9-3.3-3.9 VIN, 10 µs Edge, 58-500-58 mA
Load, 100 ns Edge
Figure 25. Startup, VOUT=2.9 V, 50 Ω Load
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
8
Typical Performance Characteristics (Continued)
Unless otherwise noted, VIN = VEN = 3.6 V, VMODE = 0 V (AUTO Mode), and TA = 25°C.
Figure 26. Startup, VOUT=2.9 V, 4.7 Ω Load
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
9
Operation Description
The FAN53600/10 is a 3 MHz, step-down switching voltage
regulator, available in 600 mA or 1 A options, that delivers a
fixed output from an input voltage supply of 2.3 V to 5.5 V.
All voltage options can be ordered with a feature that actively
discharges FB to ground through a 230 path when EN is
LOW. Raising EN above its threshold voltage activates the
part and starts the soft-start cycle. During soft-start, the
internal reference is ramped using an exponential RC shape
to prevent overshoot of the output voltage. Current limiting
minimizes inrush during soft-start.
Using
a
proprietary architecture with synchronous
rectification, the FAN53600/10 is capable of delivering a
peak efficiency of 97%.
The regulator operates at a nominal fixed frequency of
3 MHz, which reduces the value of the external components
to as low as 1 µH for the output inductor and 10 µF for the
output capacitor. In addition, the PWM modulator can be
synchronized to an external frequency source.
The IC may fail to start if heavy load is applied during startup
and/or if excessive COUT is used. This is due to the current-
limit fault response, which protects the IC in the event of an
over-current condition present during soft-start.
The current required to charge COUT during soft-start,
commonly referred to as ―displacement current,‖ is given as:
Control Scheme
The FAN53600/10 uses a proprietary, non-linear, fixed-
frequency PWM modulator to deliver a fast load transient
response, while maintaining a constant switching frequency
over a wide range of operating conditions. The regulator
performance is independent of the output capacitor ESR,
allowing the use of ceramic output capacitors. Although this
type of operation normally results in a switching frequency
that varies with input voltage and load current, an internal
frequency loop holds the switching frequency constant over
a large range of input voltages and load currents.
dV
IDISP COUT
(2)
dt
dV
dt
where the
term refers to the soft-start slew rate above.
To prevent shutdown during soft-start, the following condition
must be met:
IDISP ILOAD IMAX (DC)
(3)
For very light loads, the FAN53600/10 operates in
Discontinuous Conduction Mode (DCM), single-pulse, PFM
Mode; which produces low output ripple compared with other
PFM architectures. Transition between PWM and PFM is
seamless, allowing for a smooth transition between DCM
and CCM modes.
where IMAX(DC) is the maximum load current the IC is
guaranteed to support.
Startup into Large COUT
Multiple soft-start cycles are required for no-load startup if
COUT is greater than 15 F. Large COUT requires light initial
load to ensure the FAN53600/10 starts appropriately. The IC
shuts down for 1.3 ms when IDISP exceeds ILIMIT for more
than 200 s of current limit. The IC then begins a new soft-
start cycle. Since COUT retains its charge when the IC is off,
the IC reaches regulation after multiple soft-start attempts.
Combined
with
exceptional
transient
response
characteristics, the very low quiescent current of the
controller (26 µA) maintains high efficiency at very light
loads, while preserving fast transient response for
applications requiring tight output regulation.
100% Duty Cycle Operation
MODE Pin
When VIN approaches VOUT, the regulator increases its duty
cycle until 100% duty cycle is reached. As the duty cycle
approaches 100%, the switching frequency declines due to
the minimum off-time (tOFF(MIN)) of about 40 ns imposed by
the control circuit. When 100% duty cycle is reached, VOUT
follows VIN with a drop-out voltage (VDROPOUT) determined by
the total resistance between VIN and VOUT as calculated by:
Logic 1 on this pin forces the IC to stay in PWM Mode. Logic
0 allows the IC to automatically switch to PFM during light
loads. If the MODE pin is toggled, with a frequency between
1.3 MHz and 1.7 MHz, the converter synchronizes its
switching frequency to two times the frequency on the
MODE pin.
The MODE pin is internally buffered with a Schmitt trigger,
which allows the MODE pin to be driven with slow rise and
fall times. An asymmetric duty cycle for frequency
synchronization is also permitted as long as the minimum
time below VIL(MAX) or above VIH(MAX) is 100 ns.
VDROPOUT ILOAD
PMOSRDS(ON) DCRL
(1)
Enable and Soft-Start
When EN is LOW, all circuits are off and the IC draws
~250 nA of current. When EN is HIGH and VIN is above its
UVLO threshold, the regulator begins a soft-start cycle. The
output ramp during soft-start is a fixed slew rate of 50 mV/s
from VOUT = 0 to 1 V, then 12.5 mV/s until the output
reaches its setpoint. Regardless of the state of the MODE
pin, PFM Mode is enabled to prevent current from being
discharged from COUT if soft-start begins when COUT is
charged.
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
10
Current Limit, Fault Shutdown, and Restart
Minimum Off-Time and Switching Frequency
A heavy load or short circuit on the output causes the current
in the inductor to increase until a maximum current threshold
is reached in the high-side switch. Upon reaching this point,
the high-side switch turns off, preventing high currents from
causing damage. The regulator continues to limit the current
cycle by cycle. After 16 cycles of current limit, the regulator
triggers an over-current fault, causing the regulator to shut
down for about 1.3 ms before attempting a restart.
tOFF(MIN) is 40 ns. This imposes constraints on the maximum
VOUT
that the FAN53600/10 can provide, or the maximum
VIN
output voltage it can provide at low VIN while maintaining a
fixed switching frequency in PWM Mode.
When VIN is LOW, fixed switching frequency is maintained as
long as:O
If the fault was caused by short circuit, the soft-start circuit
attempts to restart and produces an over-current fault after
about 200 s.
VOUT
1tOFF (MIN ) fSW 0.88
VIN
The closed-loop peak-current limit, ILIM(PK), is not the same as
the open-loop tested current limit, ILIM(OL), in the Electrical
Characteristics table. This is primarily due to the effect of
propagation delays of the IC current-limit comparator.
The switching frequency drops when the regulator cannot
provide sufficient duty cycle at 3 MHz to maintain regulation.
This occurs when VOUT >0.85 VIN at high load currents. The
calculation for switching frequency is given by:
Under-Voltage Lockout (UVLO)
1
fSW min
,3MHz
(4)
When EN is HIGH, the under-voltage lockout keeps the part
from operating until the input supply voltage rises high
enough to properly operate. This ensures no misbehavior of
the regulator during startup or shutdown.
tSW (MAX )
where:
VOUT IOUT ROFF
VIN IOUT RON VOUT
tSW(MAX ) 40ns 1
(5)
Thermal Shutdown (TSD)
When the die temperature increases, due to a high load
condition and/or a high ambient temperature, the output
switching is disabled until the temperature on the die has
fallen sufficiently. The junction temperature at which the
thermal shutdown activates is nominally 150°C with a
15°C hysteresis.
where:
ROFF
RON
=
RDSON _N DCRL
=
RDSON _P DCRL
.
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
11
Applications Information
Selecting the Inductor
The output inductor must meet both the required inductance
and the energy handling capability of the application. The
inductor value affects average current limit, the PWM-to-
PFM transition point, output voltage ripple, and efficiency.
The increased RMS current produces higher losses through
the RDS(ON) of the IC MOSFETs, as well as the inductor DCR.
Increasing the inductor value produces lower RMS currents,
but degrades transient response. For a given physical
inductor size, increased inductance usually results in an
inductor with lower saturation current and higher DCR.
The ripple current (∆I) of the regulator is:
Table 1 shows the effects of inductance higher or lower than
the recommended 1 H on regulator performance.
VOUT
VIN
VIN VOUT
L fSW
I
(6)
Output Capacitor
The maximum average load current, IMAX(LOAD), is related to
the peak current limit, ILIM(PK), by the ripple current, given by:
Table 2 suggests 0603 capacitors which may improve
performance in that the effective capacitance is higher. This
improves transient response and output ripple.
I
2
IMAX (LOAD) ILIM(PK )
(7)
Increasing COUT has no effect on loop stability and can
therefore be increased to reduce output voltage ripple or to
improve transient response. Output voltage ripple, ∆VOUT, is:
The transition between PFM and PWM operation is
determined by the point at which the inductor valley current
crosses zero. The regulator DC current when the inductor
current crosses zero, IDCM, is:
2
f
C
2D
ESR
1
SW
OUT
V
I
OUT
L
(10)
1D
8 f
C
SW OUT
I
2
(8)
IDCM
Input Capacitor
The 2.2 F ceramic input capacitor should be placed as
close as possible between the VIN pin and GND to minimize
parasitic inductance. If a long wire is used to bring power to
the IC, additional ―bulk‖ capacitance (electrolytic or tantalum)
should be placed between CIN and the power source lead to
reduce ringing that can occur between the inductance of the
power source leads and CIN.
The FAN53600/10 is optimized for operation with L = 1 H,
but is stable with inductances up to 2.2 H (nominal). The
inductor should be rated to maintain at least 80% of its value
at ILIM(PK)
.
Efficiency is affected by inductor DCR and inductance value.
Decreasing the inductor value for a given physical size
typically decreases DCR; but since ∆I increases, the RMS
current increases, as do the core and skin effect losses:
The effective capacitance value decreases as VIN increases
due to DC bias effects.
I2
12
2
(9)
IRMS
IOUT(DC)
Table 1. Effects of Changes in Inductor Value (1 µH Recommended Value) on Regulator Performance
Inductor Value
Increase
IMAX(LOAD)
Increase
Decrease
∆VOUT
Decrease
Increase
Transient Response
Degraded
Decrease
Improved
Table 2. Recommended Passive Components and Variation Due to DC Bias
Component
Description
Vendor
Min.
Typ.
Comment
1 H, 2012, 190 m,
Murata LQM21PN1R0MC0
Not recommended for 1 A load
1 H
0.8 A
L1
Murata
LQM2MPN1R0MGH
Utilized to generate graphs,
Figure 4 — Figure 26
1 H, 1.4 A, 64 m,
1 H
2016
Murata or Equivalent
GRM155R60J225ME15
GRM188R60J225KE19D
Decrease primarily due to DC bias
(VIN) and elevated temperature
2.2 F, 6.3 V, X5R,
CIN
1.0 F
4.5 F
2.2 F
0402
Decrease primarily due to DC bias
(VOUT) and elevated temperature.
Output capacitor for VOUT ≥ 2.7 V
Murata or Equivalent
GRM188R60J106ME47D
COUT
10 F, X5R 0603
10 F
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
12
PCB Layout Guidelines
There are only three external components: the inductor and
the input and output capacitors. For any buck switcher IC,
including the FAN53600/10, it is important to place a low-ESR
input capacitor very close to the IC, as shown in Figure 27.
The input capacitor ensures good input decoupling, which
helps reduce noise at the output terminals and ensures that
the control sections of the IC do not behave erratically due to
excessive noise. This reduces switching cycle jitter and
ensures good overall performance. It is important to place the
common GND of CIN and COUT as close as possible to the C2
terminal. There is some flexibility in moving the inductor further
away from the IC; in that case, VOUT should be considered at
the COUT terminal.
Figure 27. PCB Layout Guidance
The following information applies to the WL-CSP package dimensions on the next page:
Product-Specific Dimensions
D
E
X
Y
1.160 ±0.030
0.860 ±0.030
0.230
0.180
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN53600 / FAN53610 • Rev. 1.4
13
F
0.03 C
E
A
2X
0.40
B
D
A1
BALL A1
INDEX AREA
(Ø0.20)
Bottom of Cu Pad
0.40
F
(Ø0.30)
Solder Mask
Opening
0.03 C
2X
TOP VIEW
RECOMMENDED LAND PATTERN
(NSMD PAD TYPE)
0.06 C
0.378±0.018
0.208±0.021
0.05 C
0.586±0.039
E
SEATING PLANE
D
C
NOTES:
SIDE VIEWS
A. NO JEDEC REGISTRATION APPLIES.
B. DIMENSIONS ARE IN MILLIMETERS.
Ø0.260±0.010
6X
C. DIMENSIONS AND TOLERANCES PER
ASMEY14.5M, 2009.
0.40
0.005
C A B
D. DATUM C, THE SEATING PLANE IS DEFINED
BY THE SPHERICAL CROWNS OF THE BALLS.
C
B
A
(Y) +/-0.015
F
E. PACKAGE TYPICAL HEIGHT IS 586 MICRONS
0.40
±39 MICRONS (547-625 MICRONS).
F. FOR DIMENSIONS D, E, X, AND Y, SEE
PRODUCT DATASHEET.
2
1
(X) +/-0.015
G. DRAWING FILENAME: MKT-UC006ACrev6.
BOTTOM VIEW
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明