MN102H76G [PANASONIC]
null234234;型号: | MN102H76G |
厂家: | PANASONIC |
描述: | null234234 |
文件: | 总3页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MN102H76G
MN102H76G
128 K
Type
ROM (×8-bit)
RAM (×8-bit)
Package
4 K
*Lead-free
QFP084-P-1818E
Minimum Instruction
Execution Time
83 ns (at 3.135 V to 3.465 V, 12 MHz)
External (7 lines)
Interrupts
Internal (28 lines) : Timer × 11, A/D × 1, Undefined command × 1, RESET × 1, OSD × 2, Serial × 2,
I2C × 1, Caption × 2, Remote control × 1, Address coincidence × 4, HSYNC× 1, VSYNC× 1
8-bit timer × 10
Timer Counter
Serial Interface
Watchdog timer: 17-bit × 1
I2C × 1: for multimaster mode, bus line (output) has 2 systems
Sync serial / UART × 1
• Built-in sync separator × 1
Caption
35
• Common use
I/O Pins
I/O
10-bit × 8-ch. (with S/H)
8-bit × 6-ch.
A/D Inputs
PWM
Remote control reception
Special Ports
CRTC
3-layer display (graphics, characters, splits)
Remote control input discriminant circuit built-in,
Notes
build-in NTSC video signal processing circuit, built-in 3-line comb filter
MAE00018BEM
MN102H76G
Pin Assignment
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
P15, RMIN, /IRQ7
GOUT
ROUT
VIREF
VCOMP
VMOUT
AVDD
FBPIN
AVSS
*P16, SDA0
*P17, SCL0
P20, WDOUT
P21, STOP, VOUT0
P27, SBT0
P30, SBD0
P31, SBO0
*P32, SDA1
*P33, SCL1
P34, PWM0
P35, PWM1
P36, PWM2
DVDD
EW
VOUT
AVDD
FSCOUT
FSCIN
FPCO
MN102H76G
DVSS
AVSS
P22, SYSCLK
*P23, TM5IO
*P26, TM8IO
P43, /RST
FVCOI
HOUT
HDOWN
EHTIN
BEAMIN
ABLIN
P44, /IRQ0
P45, /IRQ1
QFP084-P-1818E *Lead-free
*5 V dielectric Nch open drain output pin
Support Tool
PX-ICE102H76-QFP084-P-1818E
In-circuit Emulator
MAE00018BEM
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general elec-
tronic equipment (such as office equipment, communications equipment, measuring instruments and house-
hold appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-
tion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-
tions satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-
ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP
相关型号:
MN102H797
Microcontroller, 16-Bit, MROM, 12MHz, CMOS, PQFP64, 14 X 14 MM, PLASTIC, LQFP-64
PANASONIC
MN102HF57K
Microcontroller, 16-Bit, FLASH, 12MHz, CMOS, PQFP84, 18 X 18 MM, PLASTIC, QFP-84
PANASONIC
©2020 ICPDF网 联系我们和版权申明