NE3519M04-T2B [RENESAS]
RF SMALL SIGNAL, FET;型号: | NE3519M04-T2B |
厂家: | RENESAS TECHNOLOGY CORP |
描述: | RF SMALL SIGNAL, FET |
文件: | 总13页 (文件大小:418K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PreliminaryData Sheet
NE3519M04
N-channel GaAs HJ-FET, L to C Band Low Noise Amplifier
R09DS0008EJ0100
Rev.1.00
Oct 21, 2010
FEATURES
•
Low noise figure and high associated gain
NF = 0.40 dB TYP., Ga = 18.5 dB TYP. @VDS = 2 V, ID = 10 mA, f = 2 GHz
•
Flat-lead 4-pin thin-type super minimold (M04) package
APPLICATIONS
•
•
Satellite radio (SDARS, etc.)
Low noise amplifier for microwave communication system
ORDERING INFORMATION
Part Number
Order Number
Package
Quantity
Marking
Supplying Form
NE3519M04-T2
NE3519M04-T2-A
Flat-lead 4-pin
thin-type super
minimold (M04)
(Pb-Free)
3 kpcs/reel
V85
bossed tape 8 mm wide
1 (Source), Pin 2 (Drain)
face the perforation side of
the tape
NE3519M04-T2B NE3519M04-T2B-A
15 kpcs/reel
Remark To order evaluation samples, please contact your nearby sale
Part number for sample order: NE3519M04
ABSOLUTE MAXIMUM RATINGS (T = +2s otherwise specified)
A
Parameter
Drain to Source Voltage
Gate to Source Voltage
Drain Current
Symbol
VDS
VGS
ID
R
Unit
V
V
mA
μA
mW
°C
Gate Current
IG
200
Total Power Dissipation Note
Channel Temperature
Storage Temperature
150
+150
−65 to +150
°C
Note: Mounted on 1.08 cm2 lass epoxy PWB
CAUTION
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 1 of 11
NE3519M04
RECOMMENDED OPERATING RANGE (T
A
= +25°C)
Parameter
Drain to Source Voltage
Drain Current
Symbol
VDS
MIN.
TYP.
MAX.
Unit
V
−
−
−
2
10
−
3
25
0
ID
mA
dBm
Input Power
Pin
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified)
Parameter
Gate to Source Leak Current
Saturated Drain Current
Gate to Source Cutoff Voltage
Transconductance
Symbol
IGSO
Test Conditions
VGS = −3.0 V
MIN.
−
TYP.
0.5
MAX.
10
Unit
μA
mA
V
IDSS
VDS = 2 V, VGS = 0 V
30
45
60
VGS (off)
gm
VDS = 2 V, ID = 50 μA
VDS = 2 V, ID = 10 mA
−0.25
80
−0.50
−
0.40
18.5
−0.75
−
0.70
−
mS
dB
dB
Noise Figure
NF
VDS = 2 V, ID = 10 mA, f = 2 GHz
−
16.5
Associated Gain
Ga
STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25C, unless otherwise
specified)
Parameter
Symbol
Test Conditions
ence Value
Unit
Gain 1 dB Compression Output
Power
PO (1 dB) VDS = 2 V, ID = 10 mA set (Non
f = 2 GHz
+11
dBm
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 2 of 11
NE3519M04
TYPICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified)
TOTAL POWER DISSIPATION
vs. AMBIENT TEMPERATURE
250
Mounted on Glass Epoxy PCB
(1.08 cm2 × 1.0 mm (t) )
200
150
100
50
0
50
100
150
200
(°C)
250
Ambient Temperature T
A
DRAIN CURRENT vs.
DRAIN CUT vs.
GATE TO SOURCE VOLTAGE
DRAIN VOLTAGE
50
45
40
35
30
25
20
15
10
5
100
80
V
DS = 2 V
VGS = 0 V
–0.1 V
–0.2 V
–0.3 V
20
–0.4 V
–0.5 V
0
–1.0
–0.8
–0.6
–0.4
–0.
1
2
3
4
5
0
Gate to Source Voltage V
Drain to Source Voltage VDS (V)
MINIMUM NOISE FIG
ASSOCIATED GAIN ENCY
MINIMUM NOISE FIGURE,
ASSOCIATED GAIN vs. FREQUENCY
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
20
18
16
14
12
10
8
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
20
18
16
14
12
10
8
G
a
G
a
6
6
NFmin
NFmin
4
4
V
DS = 2 V
= 10 mA
VDS = 2 V
ID = 25 mA
2
2
0.2
0.0
0.2
0.0
ID
0
0
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20
Frequency f (GHz)
Frequency f (GHz)
Remark The graphs indicate nominal characteristics.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 3 of 11
NE3519M04
MINIMUM NOISE FIGURE,
MINIMUM NOISE FIGURE,
ASSOCIATED GAIN vs. DRAIN CURRENT
ASSOCIATED GAIN vs. DRAIN CURRENT
20
20
1.6
1.6
f = 2.0 GHz,
VDS = 2 V
f = 2.5 GHz,
VDS = 2 V
18
16
14
12
10
8
18
16
14
12
10
8
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
G
a
G
a
NFmin
NFmin
6
6
4
4
0
5
10
15
20
25
30
5
25
0
10
15
20
30
Drain Current I
D
(mA)
Drain Current I
D
(mA)
MINIMUM NOISE FIGURE, ASSOCIATED GAIN
vs. DRAIN TO SOURCE VOLTAGE
MINIMUM NOISE FIGURE, ASSOCIATED GAIN
vs. DRAIN TO SOUVOLTAGE
20
18
16
14
12
10
8
20
18
16
14
12
10
8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1.6
1.4
1.2
1.0
.2
0.0
f = 2.0 GHz, I
D
= 10 mA
f = 2.5 G
Ga
Ga
NFmin
NFmin
6
6
4
1.0
1.5
2.0
2.5
3.0
1.0
1.5
2.0
2.5
3.0
3.5
Drain to Source Voltage VDS (V
Drain to Source Voltage VDS (V)
Remark The graphs indicate nomstics.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 4 of 11
NE3519M04
INSERTION POWER GAIN, ISOLATION
vs. FREQUENCY
MAG, MSG, K FACTOR vs. FREQUENCY
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0
25
20
15
10
5
25
20
15
10
5
V
DS = 2 V,
= 10 mA
V
DS = 2 V,
= 10 mA
ID
ID
–5
–10
–15
–20
–25
2
|S21
|
MSG
MAG
2
|S12
|
K factor
0
0
0
2
4
6
8
10 12 14 16 18 20 22 24
0
2
4
6
8
10 12 14 16 18 20 22 24
Frequency f (GHz)
Frequency f (GHz)
INSERTION POWER GAIN, ISOLATION
vs. FREQUENC
MAG, MSG, K FACTOR vs. FREQUENCY
5.0
25
20
15
10
5
0
25
20
5
V
DS = 2 V,
= 25 mA
V
DS = 2 V,
= 25 mA
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
I
D
ID
–5
–10
–15
–20
–25
MSG
MAG
2
|S12
|
K factor
0
0
0
2
4
6
8
10 12 14 16 18 20
0
2
4
6
8
10 12 14 16 18 20 22 24
Frequency f (GHz)
Frequency f (GHz)
Remark The graphs indicate nomstics.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 5 of 11
NE3519M04
OUTPUT POWER, POWER GAIN, DRAIN CURRENT,
GATE CURRENT vs. INPUT POWER
25
20
15
10
5
80
70
60
50
40
30
20
10
G
P
f = 2 GHz, VDS = 2 V,
I
P
D
= 10 mA set,
O (1 dB) optimize
P
out
0
I
D
–5
–10
–15
I
G
–25
–30
–20
–15
–10
–5
0
5
Input Power Pin (dBm)
OUTPUT POWECURRENT
vs. INPUT PO
100
90
80
70
60
50
40
30
20
10
0
30
20
f1 = 2 000 MHz
f2 = 2 001 MHz
10
0
–10
–
–30
–40
–50
–60
–70
IM3 (L)
IM3 (H)
I
D
V
P
DS = 2 V, I
O (1 dB) optimize
D
= 10 mA set,
–30
–25
–20
–15
–10
–5
0
5
10
Input Power Pin (2 tone) (dBm)
Remark The graphs indicate nominal characteristics.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 6 of 11
NE3519M04
S-PARAMETERS
S-parameters and noise parameters are provided on our Web site in a format (S2P) that enables the direct import of the
parameters to microwave circuit simulators without the need for keyboard inputs.
Click here to download S-parameters.
[RF and Microwave] → [Device Parameters]
URL http://www2.renesas.com/microwave/en/download.html
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 7 of 11
NE3519M04
MOUNTING PAD LAYOUT DIMENSIONS
FLAT-LEAD 4-PIN THIN-TYPE SUPER MINIMOLD (M04) (UNIT: mm)
1.6
0.6
Remark The mounting pad layout in this document is for reference only.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 8 of 11
NE3519M04
PACKAGE DIMENSIONS
FLAT-LEAD 4-PIN THIN-TYPE SUPER MINIMOLD (M04) (UNIT: mm)
2.05 0.1
1.25 0.1
(Bottom View)
(1.05)
CONNECTIONS
1. Source
2. Drain
3. Source
4. Gate
Remark ( ): Reference
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 9 of 11
NE3519M04
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature) : 260°C or below
IR260
Time at peak temperature
: 10 seconds or less
: 60 seconds or less
: 120 30 seconds
: 3 times
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
Partial Heating
Peak temperature (terminal temperature)
Soldering time (per side of device)
: 350°C or below
: 3 seconds or less
HS350
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
CAUTION
Do not use different soldering methods together (except for partial heating).
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 10 of 11
NE3519M04
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R09DS0008EJ0100 Rev.1.00
Oct 21, 2010
Page 11 of 11
Revision History
NE3519M04 Data Sheet
Description
Summary
Rev.
1.00
Date
Page
Oct 21, 2010
−
First edition issued
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas
Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to
be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and
regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to
the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product
depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas
Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the
use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.
The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic applances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equical equipment not specifically
designed for life support.
"Specific":
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life sdevices or systems), surgical
implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct thre
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, espem rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electmalfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products havs the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistanplement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronin for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other e the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the ach Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use ng without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable
11. This document may not be reproduced or duplicated, in any form, in whole or in part, withesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regardinhis document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electrons its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or mElectronics.
SALES OFFICES
http://www.renesas.com
Refer to "http://www.renesas.com/" for thation.
Renesas Electronics America Inc
2880 Scott Boulevard Santa Clar
Tel: +1-408-588-6000, Fax: +1
Renesas Electronics Cana
1101 Nicholson Road, NewmCanada
Tel: +1-905-898-5441, Fax: +1-9
Renesas Electronics Europe Lim
Dukes Meadow, Millboard Road, Bou, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628--900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
7F, No. 363 Fu Shing North Road Taipei, Taiwan, R.O.C.
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2010 Renesas Electronics Corporation. All rights reserved.
Colophon 1.0
相关型号:
©2020 ICPDF网 联系我们和版权申明