SI4844 [SILICON]
Broadcast Analog Tuning Digital Display AM/FM/SW Radio Receiver;型号: | SI4844 |
厂家: | SILICON |
描述: | Broadcast Analog Tuning Digital Display AM/FM/SW Radio Receiver |
文件: | 总3页 (文件大小:1047K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Si4840/44
Broadcast Analog Tuning Digital Display AM/FM/SW Radio Receiver
Description
Features
The Si4840/44 is the first analog-tuned digital-display
(ATDD) CMOS AM/FM/SW radio receiver IC that integrates
the complete receiver function from antenna input to audio
output. The Si4840/44 implements Silicon Labs' proven
low-IF digital architecture, providing an easy and reliable
control interface while eliminating all the manual tuned
external components used in traditional solutions. The
architecture also provides the industry's leading receiver
performance, with excellent sensitivity and selectivity in all
- Worldwide FM band support (64–109 MHz)
- Worldwide AM band support (504–1750 kHz)
- SW band support (Si4844 only) (2.3–28.5 MHz)
- Selectable support for all AM/FM/SW regional bands
- 2-wire control interface
- Flexible Mono/Stereo control and programmability
- Digital volume control support
- Excellent real-world performance
- Automatic frequency control (AFC)
- EN55020 compliant
- Minimal BOM components with no manual alignment
- Two AAA batteries with 2.0 to 3.6 V supply voltage
- Wide range of ferrite loop sticks and air loop antennas
- 24-pin SSOP package
supported bands. The Si4840/44 uses
potentiometer to provide an analog-tuning interface, and
outputs the highly-accurate tuned frequency to
a
simple
a
companion MCU / display driver via I2C-compatible, 2-wire
control interface. The device supports industry-leading
features for band selection, Bass/Treble boost, European
EN 55020/22 and U.S. FCC compliance, and advanced
audio conditioning for all signal environments to remove
pops, clicks, and abrasive static. The device also supports
interrupts for valid tuned frequencies and stereo/mono
signal quality. These features provide a superb and highly
reliable user experience. Like other successful audio
products from Silicon Labs, the Si4840/44 offers
unmatched integration and PCB space savings with
minimum external components and small board area on a
single side PCB. The high integration and complete system
production test simplifies design-in, increases system
quality, and improves manufacturability. The receiver has
very low power consumption, runs off two AAA batteries,
and delivers the performance benefits of high performance
digital radio effect with digital display to the legacy analog-
tuned radio market.
- RoHS compliant
Applications
- Table and portable radios
- Stereos
- Mini/micro systems
- Boomboxes
- Clock radios
- Modules
- Entertainment systems
- Toys, lamps, and any application needing an AM/FM
radio
Si484x
ADC
ADC
DAC
AMI
LOUT
ROUT
AM
ANT
LNA
DSP
RFGND
DAC
FM
ANT
AGC
FMI
0/90
TUNE1/2
BAND
ADC
AFC
REG
XTALI
2.0~3.6V
CONTROL
INTERFACE
VDD1/2
XTAL
OSC
AM/FM/SW Receiver
Copyright © 2011 by Silicon Laboratories
6.13.2011
Si4840/44
Broadcast Analog Tuning Digital Display AM/FM/SW Radio Receiver
Selected FM Electrical Specifications
Parameter
Input Frequency
Symbol
Conditions
Min
64
—
—
—
—
—
—
—
Typ
—
Max
109
—
Units
MHz
fRF
Sensitivity
(S+N)/N = 26 dB
2.2
105
50
µV EMF
dBµV EMF
dB
Input IP3
—
Adjacent Channel Selectivity
Alternate Channel Selectivity
Audio Output Voltage
Audio S/N
±200 kHz
±400 kHz
—
65
—
dB
80
—
mVRMS
dB
55
—
Audio THD
0.1
0.5
%
Selected AM Electrical Specifications
Parameter
Input Frequency
Symbol
Conditions
AM
Min
504
2.3
—
Typ
—
Max
1750
28.5
—
Units
kHz
fRF
SW
—
MHz
µV EMF
dB
Sensitivity
(S+N)/N = 26 dB
30
55
60
0.1
—
Audio S/N
—
—
Audio Output Voltage
Audio THD
—
—
mVRMS
%
—
0.5
Antenna Inductance
180
450
μH
Package Information
Pin Assignments
1
2
24
23
22
21
20
19
18
17
16
15
14
13
LOUT
ROUT
DBYP
VDD2
VDD1
XTALI
XTALO
LNA_EN
IRQ
3
TUNE1
TUNE2
BAND
NC
4
5
6
7
NC
8
FMI
SCLK
SDIO
RST
9
RFGND
NC
Table 1. Package Dimensions
10
11
12
Dimension Min
Nom
—
Max
1.75
0.25
0.30
0.25
Dimension
Min
Nom
0.635 BSC
—
Max
GND
GND
NC
A
—
e
AMI
A1
0.10
0.20
0.10
—
L
0.40
0°
1.27
8°
b
—
θ
—
c
D
—
aaa
bbb
ccc
ddd
0.20
8.65 BSC
6.00 BSC
3.90 BSC
0.18
E
0.10
E1
0.10
Notes:
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing per ANSI Y14.5M-1994.
3. This drawing conforms to the JEDEC Solid State Outline MO-137, Variation
AE.
4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020
specification for Small Body Components.
AM/FM/SW Receiver
Copyright © 2011 by Silicon Laboratories
6.13.2011
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders
Smart.
Connected.
Energy-Friendly
Products
www.silabs.com/products
Quality
www.silabs.com/quality
Support and Community
community.silabs.com
Disclaimer
Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers
using or intending to use the Silicon Laboratories products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific
device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Laboratories
reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy
or completeness of the included information. Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein. This document does not imply
or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products must not be used within any Life Support System without the specific
written consent of Silicon Laboratories. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected
to result in significant personal injury or death. Silicon Laboratories products are generally not intended for military applications. Silicon Laboratories products shall under no
circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
Trademark Information
Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo and combinations
thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®,
USBXpress® and others are trademarks or registered trademarks of Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of
ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
USA
http://www.silabs.com
相关型号:
SI4845DY-T1-E3
Small Signal Field-Effect Transistor, P-Channel, Metal-oxide Semiconductor FET,
VISHAY
SI4848DY-T1-E3
TRANSISTOR 2700 mA, 150 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET, ROHS COMPLIANT, SOP-8, FET General Purpose Small Signal
VISHAY
©2020 ICPDF网 联系我们和版权申明