SLVU2.8-8A1 [STMICROELECTRONICS]
Low voltage unit for Gigabit Ethernet protection; 千兆以太网保护低电压单位型号: | SLVU2.8-8A1 |
厂家: | ST |
描述: | Low voltage unit for Gigabit Ethernet protection |
文件: | 总8页 (文件大小:202K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SLVU2.8
Low voltage unit for Gigabit Ethernet protection
Features
■ Peak pulse current : I = 30 A 8/20 µs
PP
■ Low capacitance : C = 1.5 pF
typ
■ Stand-off voltage : V = 2.8 V
R
■ Low leakage current : I
= 0.2 µA
Rmax
SO-8 package
®
■ ECOPACK 2 compliant component
■ IEC 61000-4-5 (1kV 42 Ω 24 A) compliant at
T = 150 °C
j
Complies with the following standards
■ IEC 61000-4-2 level 4
– 15 kV (air discharge)
– 8 kV (contact discharge)
SLVU2.8-4A1
SLVU2.8-8A1
■ IEC 61000-4-4 level 4
–
2 kV - 40 A (5/50 ns)
■ IEC 61000-4-5 level 2
1 kV - 42 Ω
Description
–
The SLVU2.8 series has been designed to protect
Ethernet line. Its low capacitance makes it
compatible with Gigabit Ethernet.
■ IEEE 802.3ab and 802.3at compatible on both
receiver (4 Vmax ) and driver side ( 3.6 Vmax)
■ MIL STD 883G - Method 3015-7
SLVU2.8-4A1 is designed to be compatible with
Gigabiit Ethernet and Gigabit PoE by using two
SO-8 packages and can be used on
– 25 kV (human body model)
10/100 Mbps Ethernet by using a single device.
SLVU2.8-8A1 is designed to be compatible with
Gigabiit Ethernet and Gigabit PoE by using a
single SO-8 package.
Surge capability is compatible with IEC 61000-4-5
class 2 (1 kV, 42 Ω, 24 A).
Packaged in SO-8, the SLVU2.8 is a flow-through
design in order to minimize trace inductances.
Footprint is in accordance with IPC 7531
standard.
May 2011
Doc ID 16191 Rev 2
1/8
www.st.com
8
Characteristics
SLVU2.8
1
Characteristics
Table 1.
Symbol
Absolute ratings (T
= 25 °C)
amb
Parameter
Value
Unit
PPP
IPP
Tstg
Tj
Peak pulse power (8/20 µs)
600
30
W
A
Peak pulse current (8/20 µs)
Storage temperature range
-65 to + 150
-55 to + 150
260
°C
°C
°C
Maximum junction temperaturee
Maximum lead temperature for soldering during 10 s.
TL
Table 2.
Electrical characteristics values (T
= 25 °C)
amb
VCL @ PP
I
VCL @ PP
I
C
IRM @VRM
I/O to I/O
8/20 µs
8/20 µs
Order code
max.
85 °C
typ.
nA
max.
µA
max.
max.
typ.
pF
max.
pF
µA
V
V
A
V
A
SLVU2.8-4A1
SLVU2.8-8A1
2
2
0.2
0.2
1
1
2.8
2.8
15
15
24
24
12
12
12
12
1.5
3
2.5
5
Figure 1.
Pulse waveform
%IPP
Repetitive peak pulse current
tr = rise time (µs)
tp = pulse duration time (µs)
100
50
0
tr
tp
2/8
Doc ID 16191 Rev 2
SLVU2.8
Figure 2.
Characteristics
Relative peak pulse power versus Figure 3.
initial junction temperature
Junction capacitance versus
frequency (SLVU2.8-4A1)
PPP[Tj initial] / PPP[T j initial = 25 °C]
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
C(pF)
5
V
= 30 mV
SLVU2.8-4A1
Pin 1-2
Pin 3-4
Pin 5-6
Pin 7-8
osc
RMS
T = 25 °C
j
4
3
2
1
F(MHz)
0
10
100
1000
0
25
50
75
100
125
150
Figure 4.
Junction capacitance versus
frequency (SLVU2.8-8A1)
Figure 5.
Junction capacitance versus
reverse applied voltage
(typical values)
C(F)
C(pF)
5
5.0
F = 1 MHz
V
= 30 mV
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
osc
RMS
V
= 30 mVRMS
osc
T = 25 °C
T = 25 °C
j
4
3
2
1
j
SLVU2.8-8A1
Pin 1-2
Pin 3-4
Pin 5-6
Pin 7-8
SLVU2.8-8A1
SLVU2.8-4A1
F(MHz)
VR(V)
0
0.0
0
10
100
1000
1
2
3
Figure 6.
Leakage current versus junction
temperature (typical values)
Figure 7.
S21 attenuation (typical value)
dB
Ir(nA)
100
0
-2
-4
-6
-8
Vr = Vrm
10
Tj (°C)
150
F(Hz)
1
25
50
75
100
125
300k
1M
3M
10M 30M 100M 300M 1G
3G
Doc ID 16191 Rev 2
3/8
Characteristics
SLVU2.8
Figure 8.
Connection for 10/100 Mbps
Ethernet with SLVU2.8-4A1
Figure 9.
Connection for 1G Ethernet with
SLVU2.8-8A1
Pair #1
Pair #1
Pair #3
Pair #4
Pair #2
Pair #2
Figure 10. Schematic for 10/100 Mbps Ethernet
Secondary
Primary
Tranceiver
Protection
Protection
V
RJ45
4/8
Doc ID 16191 Rev 2
SLVU2.8
Ordering information scheme
Figure 11. Schematic for 1 Gbps Ethernet
Secondary
Protection
(optional)
V
Tranceiver
Primary
Protection
V
1. For further information, refer to application note : AN3007
2
Ordering information scheme
Figure 12. Ordering information scheme
SLVU
2.8
-
4
A
1
ST low voltage unit
Stand off voltage
Vrm = 2.8 V
Number of lines
Version
Packaging
1 = SO-8
Doc ID 16191 Rev 2
5/8
Package information
SLVU2.8
3
Package information
●
●
●
●
Case: JEDEC SO-8 molded plastic over planar junction
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Flammability: Epoxy is rated UL94V-0
RoHS package
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
Table 3.
SO-8 dimensions
Dimensions
Millimeters
Min. Typ. Max. Min. Typ. Max.
Ref.
Inches
Seating
Plane
C
h x 45°
A
1.75
0.069
0.010
A1
0.1
0.25 0.004
0.049
A2
A1
A
C
A2 1.25
L
e
k
b
b
C
D
E
0.28
0.17
0.48 0.011
0.23 0.007
0.019
0.009
ppp C
L1
D
4.80 4.90 5.00 0.189 0.193 0.197
5.80 6.00 6.20 0.228 0.236 0.244
8
1
5
E1 3.80 3.90 4.00 0.150 0.154 0.157
E1
E
e
h
1.27
0.050
0.25
0.40
0.50 0.010
1.27 0.016
0.020
0.050
4
L
L1
k
1.04
0.041
0°
8°
0°
8°
ppp
0.10
0.004
Figure 13. Foot print recommendations Figure 14. Marking
6.8
(0.268)
0.6
XXXXX : Marking
ZZ : Manufacturing location
Y : Year
(0.024)
x x x x x x
4.2
WW : week
(0.165)
z z y w w
â
1.27
(0.050)
Pin 1
6/8
Doc ID 16191 Rev 2
SLVU2.8
Ordering information
4
Ordering information
Table 4.
Order code
SLVU2.8-4A1
SLVU2.8-8A1
Ordering information
Marking
Package
Weight
Base qty
Delivery mode
SLVU284
SLVU288
SO-8
SO-8
78 mg
78 mg
2500
2500
Tape and reel
Tape and reel
5
Revision history
Table 5.
Date
Document revision history
Revision
Changes
01-Sep-2009
31-May-2011
1
2
Initial release.
Updated Ethernet standard compatibility on the cover page.
Doc ID 16191 Rev 2
7/8
SLVU2.8
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
8/8
Doc ID 16191 Rev 2
相关型号:
SLVU2.8.TG
Trans Voltage Suppressor Diode, 400W, 2.8V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC PACKAGE-3
SEMTECH
©2020 ICPDF网 联系我们和版权申明