STEVAL-IPE018V1 [STMICROELECTRONICS]
Single-phase energy metering demonstration board with one current transformer based on the STPM10; 基于STPM10单相电能计量演示板带一个电流互感器型号: | STEVAL-IPE018V1 |
厂家: | ST |
描述: | Single-phase energy metering demonstration board with one current transformer based on the STPM10 |
文件: | 总4页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STEVAL-IPE018V1
Single-phase energy metering demonstration board
with one current transformer based on the STPM10
Data brief
Features
■ Single-phase, class 0.5 accuracy
■ V (RMS) = 140 to 300 V, I / I
(RMS) =
nom max
nom
2/20 A, f = 45 to 65 Hz
lin
■ Capacitive power supply
■ SPI interface connector
■ RoHS compliant
Description
The STEVAL-IPE018V1 demonstration board is a
class 0.5, single-phase microprocessor-based
STEVAL-IPE018V1
meter for power line systems of V
= 140 to 300
nom
V
, I
/ I
= 2/20 A
, f = 45 to 65 Hz
RMS nom max
RMS lin
and T
= -40 to +85 °C. One current
amb
transformer is used for current sensing.
The STEVAL-IPE018V1 demonstration board has
a 10-pin connector to be interfaced to a
microcontroller or to a PC through a parallel or
serial programmer for reading data.
December 2011
Doc ID 022630 Rev 1
1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Schematic
1
STEVAL-IPE018V1
Schematic
Figure 1.
Schematic circuit
2/4
Doc ID 022630 Rev 1
STEVAL-IPE018V1
Revision history
2
Revision history
Table 1.
Date
22-Dec-2011
Document revision history
Revision
Changes
1
Initial release.
Doc ID 022630 Rev 1
3/4
STEVAL-IPE018V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Doc ID 022630 Rev 1
相关型号:
STEVAL-ISA007V1
High power 3-phase auxiliary power supply evaluation board Based on L5991 and ESBT STC08DE150HV
STMICROELECTR
STEVAL-ISA009V1
VIPer53-E single output reference design board with 90 to 264 VAC input and 24 W output
STMICROELECTR
STEVAL-ISA010V1
Ultra wide range dual output back converter demonstration board based on the VIPER16
STMICROELECTR
STEVAL-ISA011V1
VIPER12ADIP-E low power AC/DC adapter demonstration board (suitable for the STEVAL-ILL002V1)
STMICROELECTR
STEVAL-ISA019V3
80 W ESBT quasi-resonant wide-range SMPS demonstration board based on the L6565 for 3-phase applications
STMICROELECTR
STEVAL-ISA020V1
3.5 W battery charger demonstration board based on the VIPer12AS-E and TSM101
STMICROELECTR
STEVAL-ISA023V2
Flyback AC-DC converter evaluation board based on the VIPer53-E with 24 W negative output
STMICROELECTR
STEVAL-ISA024V1
20 A step-down DC-DC converter demonstration board with 3.3 Vout and 250 kHz switching frequency, based on the L6725
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明