STOD30TPQR [STMICROELECTRONICS]
300 mA triple DC-DC converter for powering AMOLED display;型号: | STOD30TPQR |
厂家: | ST |
描述: | 300 mA triple DC-DC converter for powering AMOLED display |
文件: | 总8页 (文件大小:239K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STOD30
300 mA triple DC-DC converter for powering AMOLED display
Data brief
• Temperature range -40 °C to 85 °C
• True shutdown mode
• Fast outputs discharge after shutdown
• Short-circuit protection
• Package QFN 3.5x3.5 18 leads, 0.5 mm pitch
Applications
QFN18 3.5x3.5 mm
• Active matrix OLED power supply in portable
devices
Features
• Cellular phones, multimedia players,
camcorders and digital cameras
• Two step-up converters and an inverting
converter
Description
• Operating input voltage range from 2.5 V to
4.5 V
The STOD30 is a triple DC-DC converter for
AMOLED display panel. It integrates 300 mA
step-up and inverting DC-DC converters plus
auxiliary step-up converter. This device is
particularly suitable for battery operated products,
in which the major concern is the overall system
efficiency. It works in pulse skipping mode during
low load condition and PWM mode at 1.45 MHz
frequency for medium/high load conditions. The
high frequency allows the value and size of
external components to be reduced. The enable
and SWIRE pins allow the device to be turned off
so to reduce the current consumption to less than
1 μA. The negative inverter and auxiliary step-up
positive output voltages can be programmed by
an MCU through a dedicated pin which
• Synchronous rectification for all DC-DC
converters
• 300 mA output current for step-up and inverting
converters (VIN > 2.9 V)
• 60 mA output current for auxiliary step-up
converter
• Step-up converter fixed 4.6 V positive voltage
• Programmable negative voltage by SWIRE from
-1.4 V to -5.4 V in 100m V steps
• Greater than 90% efficiency
• Pulse skipping mode at light load condition
• 1.45 MHz PWM mode control switching
frequency
implements SWIRE protocol. Auxiliary step-up
positive output voltage is also configured by an
external pull-down resistor. Soft-start with
controlled inrush current limit, thermal shutdown
and short-circuit protection are integrated
functions of the device.
• TDMA noise high immunity
• Auxiliary step-up converter positive voltage
programmable by SWIRE from 6.7 V to 7.6 V in
300 mV steps and configurable by external
pull-down resistor
• Enable pin for auxiliary step-up converter
shutdown mode
Table 1. Device summary
• Low quiescent current in shutdown mode
• Soft-start with inrush current protection
• Overtemperature protection
Order code
Package
Packaging
QFN18 3.5x3.5
mm
3000 parts per
reel
STOD30TPQR
January 2014
DocID025751 Rev 1
1/8
For further information contact your local STMicroelectronics sales office.
www.st.com
Pin configuration
STOD30
1
Pin configuration
Figure 1. Pin configuration (top view)
Table 2. Pin description
Description
Pin
Pin name
1
2
VINP
VO3
Power input voltage pin
Aux. step-up output voltage pin
Aux. step-up switching pin
Power ground
3
LX3
4
PGND2
PGND1
LX1
5
Power ground
6
Step-up switching pin
Step-up output voltage pin
Feedback sense
7
VO1
8
FBS
9
AGND
VINA
VREF
SEL_VO3
SWIRE
EN_VO3
NC
Analog Ground
10
11
12
13
14
15
16
17
18
Analog input voltage pin
Reference voltage pin
Aux. step-up output voltage select pin
SWIRE pin
Aux. step-up enable pin
Not connected
FD
Fast Discharge configuration pin
Inverter output voltage pin
Inverter switching pin
VO2
LX2
To guarantee proper operation of the device exposed pad must be
connected to ground layers on the PCB
EXPPAD
2/8
DocID025751 Rev 1
STOD30
Package mechanical data
2
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
DocID025751 Rev 1
3/8
8
Package mechanical data
STOD30
Figure 2. QFN18 3.5x3.5x0.55 pitch 0.5 mm drawing
8374718_A
4/8
DocID025751 Rev 1
STOD30
Package mechanical data
Table 3. QFN18 3.5x3.5x0.55 pitch 0.5 mm mechanical data
mm
Dim.
Min.
Typ.
Max.
A
A1
b
0.51
0.00
0.18
0.55
0.02
0.25
3.50
3.50
2.14
2.14
0.50
0.40
0.60
0.05
0.30
D
E
D2
E2
e
1.99
1.99
2.24
2.24
L
0.30
0.20
0.50
K
aaa
bbb
ccc
ddd
eee
0.05
0.10
0.10
0.05
0.08
DocID025751 Rev 1
5/8
8
Package mechanical data
STOD30
Figure 3. QFN18 3.5x3.5x0.55 pitch 0.5 mm recommended footprint (a)
Footprint_8374718_A
a. All dimensions are in millimeters
6/8
DocID025751 Rev 1
STOD30
Revision history
3
Revision history
Table 4. Document revision history
Date
Revision
Changes
07-Jan-2014
1
Initial release.
DocID025751 Rev 1
7/8
8
STOD30
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
8/8
DocID025751 Rev 1
相关型号:
STOD32A
300 mA triple DC-DC converter for powering AMOLED displaysWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
STOD32ATPQR
300 mA triple DC-DC converter for powering AMOLED displaysWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
STOD32W
100 mA triple DC-DC converter for powering AMOLED displaysWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
STOD32WJR
100 mA triple DC-DC converter for powering AMOLED displaysWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
STOE30G06
High Efficiency Thyristor DiscretesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIRECTIFIER
STOE30G08
High Efficiency Thyristor DiscretesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIRECTIFIER
STOE30G10
High Efficiency Thyristor DiscretesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIRECTIFIER
STOE30G12
High Efficiency Thyristor DiscretesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIRECTIFIER
STOPSTAR.2
DIGITALE HANDSTOPPUHRWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
STOR.EALU2
STORE YOUR DATA WITH A SOLID AND STYLISH HARD DRIVEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
STOREALU2
STORE YOUR DATA WITH A SOLID AND STYLISH HARD DRIVEWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
STORM-433F
‘STORM’ RADIO MODEM RS232 / USBWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
RFSOLUTIONS
©2020 ICPDF网 联系我们和版权申明