STV8116 [STMICROELECTRONICS]
162 RGB x 132 single chip true 262K color OLED controller/driver; 162 RGB X 132单芯片262K真彩色OLED控制器/驱动器
| 型号： | STV8116 |
| 厂家： | 
ST |
| 描述： | 162 RGB x 132 single chip true 262K color OLED controller/driver |
| 文件： | 总4页 (文件大小：176K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STV8116
162 RGB x 132 single chip true 262K color OLED controller/driver
Data Brief
Features
Description
■ 162x132 display matrix
■ 200µA max column current
■ 100mA max row current
The STV8116 is a low-power CMOS
controller/driver “combo” IC for passive OLED
displays featuring extremely low current
consumption.
■ On-chip DC/DC step-up converter supplied
Designed to drive displays of up to 132 rows by
162 columns with 262K colors, the STV8116
provides all necessary functions in a single chip,
including an on-chip DC/DC step-up converter
resulting in a minimum of externals components.
from a 2.3 to 6V battery
■ Low power optimization:
– automatic precharge voltage
– Vrowoff optimization voltage
– Vpp self adjustment
This IC provides automatic precharge and
Vrowoff voltages as well as self adjustment of the
Vpp voltage. Global power management is
automatically adjusted to changes in brightness
levels, aging of the display and temperature.
Embedded OTP memory allows various
adjustments and storages such as white balance,
gamma table and frame frequency. These
features contribute to enhanced picture quality,
low power dissipation, improved robustness and
reduced manufacturing cost.
■ 262Kcolor mode among 2M color Palette (24-
bit look-up table for gamma settings)
■ Dual partial display modes
■ Vertical scrolling
■ Programmable number of lines
■ Programmable frame rate, 165Hz max.
■ Selectable input interfaces (read and write),
operating voltage compatible with 1.8V as well
as 3.3V signals:
A complete set of digital functions reduces host
microcontroller overhead to manage complex
display configurations and fast moving image data
transfers to the display RAM of the STV8116.
– 68000 and 8080 parallel interfaces
– 3-wire and 4-wire SPI interfaces
– 3-wire, 9-bit serial interface
■ Fully integrated oscillator requires no external
STV8116 features five standard I/O interfaces (3-
wire serial, 3-wire SPI, 4-wire SPI, 68000 parallel
and 8080 parallel) for easy interfacing with the
host microcontroller.
components
■ 7-bit RGB brightness control
■ 5-bit luminance control
■ Low-voltage digital supply range: 1.65 to 1.95V
■ Low-voltage analog supply range: 2.2 to 3.6V
■ 3.3V single supply with on-chip 1.8V LDO
■ High-voltage display supply range: 4.5 to 22V
■ One Time Programmable (OTP) non-volatile
embedded memory
■ Delivered in bumped die for chip-on-glass
(COG) or chip-on-foil (COF).
December 2006
Rev 1
1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
STV8116
Table 1.
Key features and benefits
Features
Benefits
Precise pixel voltage settings with any brightness
current value and with any change of OLED pixel
physical characteristics due to aging or
temperature.
Fully automatic precharge system
Improved power consumption.
Improved image quality.
Improved OLED pixel reliability.
Gray scale by pulse width modulation
262Kcolors selected among 16M colors.
Enables Gamma correction and guarantees finer
picture quality
On-chip DC/DC converter
On-chip oscillator
Reduced number of system components
Allows parameters setting for calibration at
module maker
Embedded OTP memory
Direct interface with system host:
Interface operating voltage @ 1.8V
- reduced number of system components
- optimization for next generation of handsets
Figure 1.
Functional block diagram
2/4
STV8116
Revision history
Revision history
Table 2.
Date
18-Dec-2006
Document revision history
Revision
Changes
1
Initial release.
3/4
STV8116
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
相关型号：
STV8130A#
DUAL OUTPUT, FIXED/ADJUSTABLE POSITIVE REGULATOR, PSFM9, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SIP-9
STMICROELECTR
STV8130AD
ADJUSTABLE AND +3.3 V DUAL VOLTAGE REGULATOR WITH DISABLE AND RESET FUNCTIONS
STMICROELECTR
STV8130D
DUAL OUTPUT, FIXED/ADJUSTABLE POSITIVE REGULATOR, PDIP16, 0.300 INCH, PLASTIC, DIP-16
STMICROELECTR
STV8162D
+5 V, +5 V and +8 V Triple-Voltage Regulator with Disable and Reset Functions
STMICROELECTR
STV8162_09
+5 V, +5 V and +8 V triple voltage regulator with disable and reset functions
STMICROELECTR
STV8163
+3.3 V, +5 V and Adjustable Triple-Voltage Regulator with Disable and Reset Functions
STMICROELECTR
STV8164
+5 V, +5 V and Adjustable Triple-Voltage Regulator with Disable and Reset Functions
STMICROELECTR
STV8172A
Vertical Deflection Booster for 3-APPTV/Monitor Applications with 70-V Flyback Generator
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明