MA4P4001F-1091T [TE]
DIODE PIN SMT CERAMIC;型号: | MA4P4001F-1091T |
厂家: | TE CONNECTIVITY |
描述: | DIODE PIN SMT CERAMIC 衰减器 CD 开关 测试 二极管 |
文件: | 总13页 (文件大小:2305K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Features
Package Styles
High Power Handling
Low Loss / Low Distortion
Voltage Ratings up to 1000 Volts
Passivated Chip for Low Leakage Current
Low Theta (θ) Due to Full Face Chip Bonding
Leadless Low Inductance MELF Packages
Various Package Options
Available as Chips
Fully RoHS Compliant
Non-Magnetic Packages Available for MRI
401 & 402
1072 & 1091
Description
Applications
The MELF and HIPAX PIN diode series are
designed for usage in switch and attenuator
applications requiring high power handling and low
HIPAX PIN diodes are designed for use in a wide
variety of switch and attenuator applications from
HF through UHF frequencies and at power levels
above 1 kW, CW. The internal chip as well as each
diode assembly has been comprehensively tested
and characterized to ensure predictable and
repeatable performance.
distortion. These diodes incorporate
a
fully
passivated PIN diode chip resulting in an extremely
low reverse bias leakage current. The
semiconductor technology utilized in the MELF and
HIPAX families draws on MACOM ’s substantial
experience in PIN diode design and wafer
fabrication. The result is a device which has a thick
I-region and long carrier lifetime while maintaining
low series resistance and capacitance values. The
chips of the MELF and HIPAX PIN diodes are
enclosed in a rugged ceramic package and is full
face bonded to metal pins on both the anode and
cathode. The result is a low loss PIN diode with low
thermal resistance due to symmetrical thermal
paths. The parts are offered in either magnetic or
non-magnetic, HIPAX (axial leaded) or MELF (Metal
Electrode Leadless Faced) surface mount packages
for MRI applications. The MELF is a rectangular
SMQ, package which is designed for high volume
tape and reel assembly. This easy to use package
design makes automatic pick and place, indexing
and assembly, extremely easy. The parallel flat sur-
faces are suitable for most key jaw or vacuum pick-
up techniques. All of the solderable surfaces are tin
plated and compatible with industry standard reflow
and vapor phase soldering processes. See Applica-
tion Note M538 for a typical solder reflow profile.
Design Recommendations
Low Distortion Attenuators
MA4P4301B
Surface Mount Switches
MA4P7101F
Cellular Radio Antenna Switches
MA4P1200, MA4P1250
Absolute Maximum Ratings
TA = +25°C (Unless Otherwise Noted)1
Parameter
Absolute Maximum
DC Reverse Voltage (VR)
(See Tables)
Operating Chip Junction
Temperature
-55°C to +175°C
Storage Temperature
Installation Temperature
ESD
-55°C to +200°C
+280°C for 30 Seconds
Class 1A, HBM
Many of MACOM’s HIPAX PIN diodes are also
available as chips. Please consult the “Silicon PIN
Chip Datasheet” for availability and specifications.
Notes
1.Operation of this device above any one of these
parameters may cause permanent damage.
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
MA4P1000 Series Electrical Specifications @ TA = +25°C
CT
Total Capacitance
pF
VR
Reverse Voltage
VDC
RS
Series Resistance
W
RP
Parallel Resistance
kW
Part #
(NM Indicates Non-
Magnetic)
VR = 50 V, 1 MHz
IR = 10 mA
IF = 50 mA, 100 MHz
VR = 0 V, 100 MHz
Min.
Typ.
Max.
Min.
Max.
Typ.
Max.
MA4P1200 - 401T
MA4P1200NM - 401T
MA4P1250 -1072T
1.2
1.2
0.8
1.5
1.5
1.2
50
100
0.5
0.75
5
MA4P1250NM -1072T
MA4P1450 -1091T
0.8
1.8
1.2
2.5
VF
TL
Forward Bias
Reverse Bias
Forward Voltage
(Max. I Forward @ 1V ≤
Carrier Lifetime
Harmonic Distortion Harmonic Distortion
R(2a/a) * R(3a/a) R(2a/a) – R(3a/a)
Part #
PIN = 30 W, 100 MHz PIN = 0 dBm, VR = 0 V,
IF = 50 mA 100 MHz
(NM Indicates Non-
Magnetic)
IF = 50 mA
IF = 10 mA, IR = 6 mA
Typ.
Max.
Min.
Typ.
Min.
Typ.
Min.
Typ.
MA4P1200 - 401T
MA4P1200NM - 401T
MA4P1250 -1072T
MA4P1250NM-1072T
MA4P1450 -1091T
0.85
1.0
2
8
80
90
60
70
*Notes:
1.) “NM” in the base part number signifies non-magnetic package.
2.) “T” suffix denotes tape and reel
Power Dissipation and Thermal Resistance Ratings @ TA = +25°C
MA4P1200(NM)-401T
MA4P1250(NM)-1072T
MA4P1450-1091T
Package
Style
Condition
PDISS
1.5 W
5.5 W
θJC
PDISS
—
θJC
—
PDISS
—
θJC
—
No Heatsink
Lead Length 1/4"
No Heatsink
B
15°C/W
Axial Lead
—
—
—
—
—
—
6 W
18 W
10 W
30 W
F
15°C/W
5°C/W
MELF
Infinite Heatsink
2
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Typical Performance Curves @ TA = +25°C
MA4P1200 Series
Capacitance vs. Frequency & Reverse Bias
Series Resistance @ 100 MHz vs. Forward Current
pF
Ω
MHz
Frequency
Forward Current
Heatsink Temperature vs. Max. Power Dissipation
Parallel Resistance vs. Frequency & Reverse Bias
Ω
MHz
Frequency
°C
Heatsink Temperature
3
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Typical Performance Curves @ TA = +25°C
MA4P1250 Series
Series Resistance @ 100 MHz vs. Forward Current
Capacitance vs. Frequency & Reverse Bias
pF
Ω
MHz
Forward Current
Frequency
Parallel Resistance vs. Frequency & Reverse Bias
Carrier Lifetime vs. Forward Bias Current
Ω
MHz
Frequency
Forward Current
4
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Typical Performance Curves @ TA = +25°C
MA4P1450 Series
Capacitance vs. Frequency and Reverse Bias
Series Resistance @ 100 MHz vs. Forward Current
pF
Ω
MHz
Frequency
Forward Current
Parallel Resistance vs. Frequency and Reverse Bias
Ω
MHz
Frequency
5
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
MA4P4000 - MA4P7100 Series Electrical Specifications @ TA = +25°C
MA4P4000 MA4P4300
MA4P7000
Series
MA4P7100
Series
Parameter
Symbol
Condition
Series
0.5 Ω
2.2 pF
20 kΩ
20 µs
1.0 V
1 µA
Series
1.0 Ω
2.0 pF
50 kΩ
15 µs
1.2 V
1 µA
Maximum Series Resistance
Maximum Total Capacitance
Minimum Parallel Resistance
Minimum Carrier Lifetime
Maximum Forward Voltage
Maximum Reverse Current
RS
CT
RP
TL
VF
IR
IF = 100 mA
VR = 100 V
0.9 Ω
0.7 pF
200 kΩ
5 µs
0.5 Ω
1.0 pF
100 kΩ
2.5 µs
1.0 V
VR = 100 V
IF = 10 mA
IF = 100 mA
1.0 V
1 µA
At max. rated voltage
1 µA
Nominal I-Region Width
μ
—
175 µm
300 µm
175 µm
100 µm
Maximum Reverse Voltage Rating ( VR )
Maximum Reverse
Voltage Rating
MA4P4000
Series
MA4P4300
Series
MA4P7000
Series
MA4P7100
Series
MA4P4001B-402
MA4P4001BNM-402
MA4P4001F-1091T
MA4P4301B-402
MA4P4301F-1091T
MA4P7101B-401T
MA4P7101F-1072T
100 V
MA4P7001F-1072T
MA4P4002B-402
MA4P4002F-1091T
MA4P7002B-401T
MA4P7002F-1072T
MA4P7102B-401T
MA4P7102F-1072T
200 V
400 V
600 V
MA4P4302B-402
MA4P7104B-401T
MA4P7104F-1072T
—
—
—
—
MA4P4006F-1091T
MA4P4006B-402
MA4P7006B-401T
MA4P7006F-1072T
—
*Notes:
1.) “NM” in the base part number signifies non-magnetic package.
2.) “T” suffix denotes tape and reel.
MA4P4000
Package
MA4P4300
Series
MA4P7000
Series
MA4P7100
Series
Series
Condition
Style
PDISS
θJC
PDISS
θJC
PDISS
θJC
PDISS
θJC
1/4” Lead Length
No Heatsink
12 W
2.5 W
7.5 W
12.5°C/W
10 W
2.5 W
5 W
15°C/W
5 W
30°C/W
—
6 W
25°C/W
B
Axial Leaded
—
—
30°C/W
—
1.5 W
10 W
1.5 W
—
F
Infinite Heatsink
20°C/W
15°C/W
11.5 W
13°C/W
MELF
Both B and F
Both B and F
Single 1 µs pulse 100 kW
Single 100 µs 5 kW
—
100 kW
5 kW
15 kW
—
15 kW
300 W
—
0.03°C/W
0.03°C/W 300 W
0.5°C/W
0.5°C/W
6
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Typical Performance Curves @ TAMB = +25°C
MA4P4000,MA4P4300, MA4P7000, MA4P7100 Series
Series Resistance at 100 MHz vs. Forward Current
MA4P4000, MA4P4300 Series
Series Resistance at 100 MHz vs. Forward Current
MA4P7000, MA4P7100 Series
Ω
Ω
Forward Current
Forward Current
Carrier Lifetime vs. Forward Bias Current
Thermal Resistance vs. Pulse Width
MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series
MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series
µS
°C/W
Forward Current
Pulse Width
7
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Typical Performance Curves @ TAMB = +25°C
MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series
Capacitance vs. Frequency & Reverse Bias
Capacitance vs. Frequency & Reverse Bias
MA4P4000 Series
MA4P4300 Series
pF
pF
MHz
Frequency
MHz
Frequency
Capacitance vs. Frequency & Reverse Bias
MA4P7100 Series
Capacitance vs. Frequency & Reverse Bias
MA4P7000 Series
pF
pF
MHz
MHz
Frequency
Frequency
8
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Typical Performance Curves @ TAMB = +25°C
MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P4000 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P4300 Series
Ω
Ω
Volts
Volts
Reverse Bias
Reverse Bias
Parallel Resistance vs. Reverse Bias & Frequency
MA4P7000 Series
Parallel Resistance vs. Reverse Bias & Frequency
MA4P7100 Series
Ω
Ω
Volts
Volts
Reverse Bias
Reverse Bias
9
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Case Styles
401 Axial Leaded Packages
402 Axial Leaded Packages
Cathode Band
Cathode Band
B
B
D
D
C
C
A
C
C
A
401 Package
(tape and reel only)
402 Package
(bulk only)
INCHES
MM
INCHES
MM
500 or 1000 pcs/reel
specify when ordering
100 pcs/bag
Min. Max. Min. Max.
Min. MAX Min. Max.
A
B
—
—
0.130
0.090
—
—
3.30
2.29
—
A
—
0.230
0.140
—
5.84
MA4P1200-401T
MA4P1200NM-401T
MA4P7002B-401T
MA4P7006B-401T
MA4P7101B-401T
MA4P7102B-401T
MA4P7104B-401T
MA4P4001B-402
MA4P4001BNM-402
MA4P4002B-402
MA4P4006B-402
MA4P4301B-402
MA4P4302B-402
B
C
—
—
3.56
0.975
24.77
—
C 0.975
24.77
D
0.039 0.041 0.99 1.04
D 0.027 0.029 0.69 0.74
1072 MELF Surface Mount Packages
1091 MELF Surface Mount Packages
Cathode
Cathode
B
A
B
A
Solderable
Surfaces
Solderable
Surfaces
A
A
C
C
1072 Package
(tape and reel only)
1091 Package
(tape and reel only)
INCHES
MM
INCHES
MM
1500 or 5000 pcs/reel
specify when ordering
500 pcs/reel
Min. Max. Min. Max.
Min. Max. Min. Max.
MA4P1250-1072T
MA4P1250NM-1072T
MA4P7001F-1072T
MA4P7002F-1072T
MA4P7006F-1072T
MA4P7101F-1072T
MA4P7104F-1072T
A 0.080 0.095 2.032 2.413
A
B
C
0.138 0.155 3.51 3.94
MA4P1450-1091T
MA4P4001F-1091T
MA4P4002F-1091T
MA4P4006F-1091T
MA4P4301F-1091T
B 0.115 0.125 2.921 3.175
C 0.008 0.023 0.203 0.584
0.181 0.191 4.57 4.85
0.011 0.026 0.279 0.660
10
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
MELF Assembly Recommendations
Devices may be soldered using standard 60Sn/40Pb or RoHS compliant solders. Axial leads and solderable
surfaces of MELF devices are tin plated 50 μm thick to ensure an optimum connection.
For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the MACOM website.
Circuit Pad Layout for MELF Diodes
MELF Internal Construction
Package Style
Dimension
1072
inches
1091
inches
mm
2.36
1.27
1.52
mm
3.81
1.27
2.54
A
B
C
0.093
0.050
0.060
0.150
0.050
0.100
A
C
B
B
Ordering Information
MELF diodes are available in tape and reel in quantities as shown in table below
Package Style
Quantity (7” Reel)
Bulk Devices Per Bag
1072T
1091T
1500 or 5000
500
N/A
N/A
Tape and reel information can be found in application note M513 the MACOM website.
11
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
Axial Leaded HIPAX Assembly Recommendations
Bends on case styles 401 and 402, axially leaded devices, must be made while holding the lead firm and forming
the bend no closer than .060 inches from the body of the part. Bending the lead <0.060 inches from the body of
the part is not recommended and may cause internal damage to the chip. Appropriate fixturing should be used.
Devices may be soldered using standard 60Sn/40Pb or any RoHS compliant solders. Axial leads are tin plated
50 μm thick to ensure an optimum connection.
For recommended Sn/Pb and RoHS soldering profiles see Application Note M538 on the MACOM website.
Case Style 401 & 402
Case Style 401 & 402
Internal Construction
Minimum Bend Distance
Cathode Band
Passivated Chip
.060” Min
.060” Min
Ordering Information
Axial leaded diodes are available in tape and reel or bulk in quantities shown in the table below
Package Style
Quantity Per Reel
Bulk Devices Per Bag
401T
402
500 or 1000 (specify qty. when ordering)
N/A
N/A
100
Environmental Ratings
HIPAX PIN diodes are designed to meet most environmental and electrical requirements and may be ordered
screened to MIL-STD-750 specifications as described in the table below.
TEST
METHOD
DESCRIPTION/ CONDITIONS
Moisture Resistance
High Temperature Storage
HTRB
1021
1031
85°C, 85% Relative Humidity, 168 hrs
+175°C , 250 Hours
1038
80% of rated VR, 50°C, 96 Hours
-65°C to +175°C, 20 Cycles
1 x 10-7 CC/Sec
Temperature Shock
Fine Leak
1051
1071 Cond. H
2006
Constant Acceleration
Solderability
20,000 G’s
2026
IPC/JDEC J-STD-02
Tension1
Lead Fatigue1
2036.3 Cond. A
2036.3 Cond. E
2 Lbs., 30 Seconds
3 Cycles, 8 oz., 90°,
Note:
1) Test applicable to HIPAX axially leaded devices only.
12
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4P MELF & HIPAX Series
High Power PIN Diodes
V16
MACOM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
13
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号:
©2020 ICPDF网 联系我们和版权申明