MAAPGM0079-DIE [TE]
Amplifier, Power, 20W 7.5-10.5 GHz; 放大器,电源, 20W 7.5-10.5 GHz的型号: | MAAPGM0079-DIE |
厂家: | TE CONNECTIVITY |
描述: | Amplifier, Power, 20W 7.5-10.5 GHz |
文件: | 总8页 (文件大小:529K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
Features
♦ 17 Watt Saturated Output Power Level
♦ 20 Watt Saturated Output Power Level over 8-10 GHz Band
♦ Variable Drain Voltage (8-10V) Operation
♦ MSAG™ Process
♦ Robust Stability
Description
The MAAPGM0079-DIE is a 3 stage 20W power amplifier with on-chip bias networks.
This product is fully matched to 50 ohms on both the input and output. It can be used
as a power amplifier stage or as a driver stage in high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly reliable GaAs
Multifunction Self-Aligned Gate (MSAG)Process, each device is 100% RF tested on
wafer to ensure performance compliance.
M/A-COM’s MSAG process features robust silicon-like manufacturing processes, pla-
nar processing of ion implanted transistors, multiple implant capability enabling power,
low-noise, switch and digital FETs on a single chip, and polyimide scratch protection
for ease of use with automated manufacturing processes. The use of refractory met-
als and the absence of platinum in the gate metal formulation prevents hydrogen poi-
soning when employed in hermetic packaging.
Primary Applications
♦ SatCom
♦ Commercial Avionics
♦ Radar
Also Available in:
Description
Ceramic Package
Sample Board (Die)
Sample Board (Pkg)
Mechanical Sample (Die)
Part Number
MAAP-000079-PKG001
MAAP-000079-SMB004
MAAP-000079-SMB001
MAAP-000079-MCH000
Electrical Characteristics: TB = 40°C1, Z0 = 50 Ω, VDD = 10V, IDQ = 4A2, Pin = 18 dBm, Rg = 20 Ω
Parameter
Symbol
Typical
7.5-10.5
42
Units
GHz
dBm
dBm
dBm
dB
Bandwidth
f
Output Power
POUT
POUT
Output Power, 8-10 GHz
1-dB Compression Point
Small Signal Gain
43
42
P1dB
G
29
Power Added Efficiency
Input VSWR
PAE
30
%
VSWR
2.5:1
2.5:1
Output VSWR
VSWR
IGG
Gate Current
50
mA
Drain Current, under RF Drive
Output Third Order Intercept
6
A
IDD
48
dBm
dBc
TOI
IM3
Output Third Order Intermod,
Pout = 39 dBm (DCL)
18.5
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.6 and –1.5V to achieve specified Idq.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
Maximum Ratings3
Parameter
Input Power
Absolute Maximum
Units
dBm
V
Symbol
PIN
23
Drain Supply Voltage
+12.0
VDD
Gate Supply Voltage
-3.0
V
VGG
Quiescent Drain Current (No RF)
Quiescent DC Power Dissipated (No RF)
Junction Temperature
6.6
65.8
A
IDQ
W
°C
°C
PDISS
170
TJ
Storage Temperature
TSTG
-55 to +150
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions4
Characteristic
Symbol
Min
Typ
Max
Unit
Drain Voltage
VDD
4.0
10.0
10.0
V
Gate Voltage
Input Power
VGG
PIN
ΘJC
TB
-2.6
-2.2
18.0
2.2
-1.5
V
21.0
dBm
°C/W
°C
Thermal Resistance
MMIC Base Temperature
Note 5
4. Operation outside of these ranges may reduce product reliability.
5. MMIC Base Temperature = 170°C — ΘJC* VDD * IDQ
Power Derating Curve, Quiescent (No RF)
70
60
50
40
30
20
10
0
Operating Instructions
This device is static sensitive. Please handle with care. To
operate the device, follow these steps.
1. Apply VGG = -2.7 V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 10.0 V.
3. Adjust VGG to set IDQ, (approximately @ –2.2 V).
4. Set RF input.
0
20
40
60
80
100
120
140
160
180
5. Power down sequence in reverse. Turn VGG off last.
MMIC Base Temperature (ºC)
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
All Data is at 40ºC MMIC base temperature, CW stimulus, unless otherwise noted.
50
48
46
44
42
40
38
36
34
32
30
50
46
42
38
34
30
26
22
18
14
10
50
48
46
44
42
40
38
36
34
32
30
VDS=10V
VDS=8V
POUT
PAE
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
Frequency (GHz)
Frequency (GHz)
Figure 2. 1dB Compression Point vs. Drain Voltage
Figure 1. Output Power and Power Added Efficiency vs. Frequency
at VDD = 10V and Pin = 18 dBm
50
48
46
44
42
40
38
36
34
32
30
45
42
39
36
33
30
27
24
21
18
15
40
37
34
31
28
25
22
19
16
13
10
6.0
Gain @ 10V
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
Input VSWR
Output VSWR
POUT : VDS=10V
PAE : VDS=10V
POUT : VDS=8V
PAE : VDS=8V
7.0
7.5
8.0
8.5
9.0
Frequency (GHz)
9.5
10.0
10.5
11.0
7
7.5
8
8.5
9
9.5
10
10.5
11
Frequency (GHz)
Figure 4. Small Signal Gain and Input and Output VSWR vs. Frequency.
Figure 3. Saturated Output Power and Power Added Efficiency vs. Frequency
and Drain Voltage
45
7.0
50
45
40
35
30
25
20
43
41
39
37
35
33
31
29
27
25
6.8
6.6
6.4
6.2
6.0
5.8
5.6
5.4
5.2
5.0
7.5 GHz
9.5 GHz
8.5 GHz
10.5 GHz
Pout
SSG
PAE
IDS
30
40
50
60
70
80
90
100
110
120
130
140
150
2
4
6
8
10
12
14
16
18
20
22
Junction Temperature (ºC)
Input Power (dBm)
Figure 6. Output Power vs. Input Power
at VDD = 10V
Fig 5. Output Power, Power Added Efficiency, and Drain Current vs. Junction
Temperature at VD=10V, f=9GHz, and Pin=18dBm.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
All Data is at 40ºC MMIC base temperature, CW stimulus, unless otherwise noted.
40
35
30
25
20
15
10
5
8
7
6
5
4
3
2
1
0
7.5 GHz
8.5 GHz
9.5 GHz
10.5 GHz
7.5 GHz
9.5 GHz
8.5 GHz
10.5 GHz
0
-2
0
2
4
6
8
10
12
14
16
18
20
22
24
2
4
6
8
10
12
14
16
18
20
22
Input Power (dBm)
Input Power (dBm)
Figure 8. Drain Current vs. Input Power
at VDD = 10V
Fig 7. Power Added Efficiency vs. Input Power at VD=10V.
35
33
31
29
27
25
23
21
19
17
15
35
33
31
29
27
25
23
21
19
17
15
7.5 GHz
7.5 GHz
9.0 GHz
10.5 GHz
9.0 GHz
10.5 GHz
25
27
29
31
33
35
37
39
41
43
45
25
27
29
31
33
35
37
39
41
43
45
Output Power (dBm)
Output Power (dBm)
Figure 9. Relative Gain vs. Output Power by Frequency at VD=8V and 25% IDSS
Figure 10. Relative Gain vs. Output Power by Frequency at VD=10V and 25%
IDSS
60
100
90
80
70
60
50
40
30
20
10
0
8 GHz
9 GHz
10 GHz
58
56
54
52
50
48
46
44
42
40
8 GHz
9 GHz
10 GHz
12
14
16
18
Fundamental Output Power, Single Tone (dBm)
Figure 11. Third Order Intercept vs. Output Power and Frequency at 8V.
20
22
24
26
28
30
32
34
36
38
12
14
16
18
Fundamental Output Power per Tone (dBm)
Figure 12. Third Order Intermod vs. Output Power and Frequency at 8V.
20
22
24
26
28
30
32
34
36
38
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
All Data is at 40ºC MMIC base temperature, CW stimulus, unless otherwise noted.
60
58
56
54
52
50
48
46
44
42
40
100
90
80
70
60
50
40
30
20
10
0
8 GHz
9 GHz
10 GHz
8 GHz
9 GHz
10 GHz
12
14
16
18
20
22
24
26
28
30
32
34
36
38
12
14
16
18
20
22
24
26
28
30
32
34
36
38
Fundamental Output Power, Single Tone (dBm)
Fundamental Output Power per Tone (dBm)
Figure 13. Third Order Intercept vs. Output Power and Frequency at 10V.
Figure 14. Third Order Intermod vs. Output Power and Frequency at 10V.
60
55
50
45
40
35
30
25
20
15
10
60
58
56
54
52
50
48
46
44
42
40
8 GHz
9 GHz
10 GHz
8 GHz
9 GHz
10 GHz
-30 -25 -20 -15 -10 -5
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85
MMIC Base Temperature (ºC)
-30 -25 -20 -15 -10 -5
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85
MMIC Base Temperature (ºC)
Figure 15. Third Order Intercept vs. Temperature and Frequency
at 10V and Pout = 39 dBm DCL.
Figure 16. Third Order Intermod vs. Temperature and Frequency
at 10V and Pout = 39 dBm DCL.
60
58
56
54
52
50
48
46
44
42
40
100
90
80
70
60
50
40
30
20
10
0
10% IDSS
25% IDSS
10% IDSS
25% IDSS
12
14
16
18
20
22
24
26
28
30
32
34
36
38
12
14
16
18
Fundamental Output Power per Tone (dBm)
Figure 18. Third Order Intermod vs. Output Power and %IDSS at 10V and 9GHz.
20
22
24
26
28
30
32
34
36
38
Fundamental Output Power, Single Tone (dBm)
Figure 17. Third Order Intercept vs. Output Power and %IDSS at 10V and 9GHz.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
Figure 11. Fixture used to characterize
MAAPGM0079-DIE under CW stimulus.
6
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
Mechanical Information
Chip Size: 5.000 x 8.150 x 0.075 mm
(197 x 321 x 3 mils)
Chip edge to bond pad dimensions are shown to the center of the bond pad.
Figure 12. Die Layout
Bond Pad Dimensions
Pad
Size (mils)
Size (μm)
100 x 200
200 x 150
500 x 200
150 x 150
150 x 125
RF In and Out
4 x 8
8 x 6
20 x 8
6 x 6
6 x 5
DC Drain Supply Voltage VD1,2
DC Drain Supply Voltage VD3
DC Gate Supply Voltage VG1,2
DC Gate Supply Voltage VG3
7
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 20W
7.5-10.5 GHz
MAAPGM0079-DIE
Rev A
Preliminary Datasheet
VDD
0.01-
Assembly and Bonding Diagram
0.1
F
VDD
VGG
Gnd
RF
Thermal Management is critical on this
part. Refer to Application Note AN3019
for applicable guidelines.
100-
200
pF
100-
200
pF
100-
200
pF
100-
200
pF
NOTE 1: All Application Notes may be ac-
cessed by going to http://www.macom.com/
Application%20Notes/index.htm.
Gate
Crossover
Drain
Crossover
NOTE 2: In implementing the DC/ RF cross-
over shown, the following rules must applied.
RFOUT
RFIN
1. the DC crossovers should approach and
cross the RF trace at a 90 degree angle;
2. the printed DC traces that approach the
RF line should be stopped 2 substrate
heights from the RF line edge;
3. the rated current capability of the DC
crossovers should be greater than the
maximum current of the device; and
100-
200
pF
100-
200
pF
100-
200
pF
100-
200
pF
4. the wires or ribbons used to make the DC
crossovers should clear the RF trace by
~ 1 substrate height.
20
VGG
0.01-
0.1
F
GND
Figure 13. Recommended operational configuration. Wire bond as shown.
Die Handling:
Refer to Application Note AN3016.
Assembly Instructions:
Die Attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 310 °C to less
than 7 minutes. Refer to Application Note AN3017 for more detailed information.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge
bond techniques. For DC pad connections, use either ball or wedge bonds. For
best RF performance, use wedge bonds of shortest length, although ball bonds are
also acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to
VDD to prevent damage to amplifier.
8
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明