MADP-000234-10720_15 [TE]

MELF PIN Diode;
MADP-000234-10720_15
型号: MADP-000234-10720_15
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

MELF PIN Diode

文件: 总2页 (文件大小:75K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MADP-000234-10720T  
MELF PIN Diode  
RoHS Compliant  
Rev. V3  
Absolute Maximum Ratings1,2 @ 25°C  
Case Style ODS 1072  
Parameter  
Absolute Maximum  
0.85 V  
Cathode  
Forward Voltage  
B
A
Reverse Voltage  
-500 V  
Solderable  
Surfaces  
A
Operating Temperature  
Storage Temperature  
Mounting Temperature  
-55°C to +150°C  
-55°C to +175°C  
+260°C for 360 seconds  
C
Size Inches (mm)  
1. Exceeding these limits may cause permanent damage to  
the device.  
2. Values will de-rate over temperature.  
A (sq)  
Min./Max.  
B
C
Case Style  
Min./Max.  
Min./Max.  
0.080/0.095  
(2.032/2.413) (2.921/3.429)  
0.115/0.135  
0.008/0.030  
(.203/.762)  
1072  
All tolerances are ± .001” (± .025 mm).  
Handling Procedures  
The following precautions should be observed to  
avoid damaging these devices.  
RoHS  
Cleanliness and Storage  
The MADP-000234-10720T is fully RoHS compliant  
meaning it contains less than the maximum allowable  
concentration of 0.1% by weight in homogenous  
materials for lead, hex chrome, mercury, PBB, PBDE,  
and 0.01% for cadmium.  
These devices should be handled and stored in a  
clean environment. Ends of the device are tin plated  
for greater solderability. Continuous exposure to high  
humidity (>80%) for extended periods may cause the  
surface to oxidize. Caution should be taken when  
storing devices for long periods.  
Mounting Techniques  
Solder Attach  
ESD  
These devices are susceptible to ESD and are rated  
Class 1.  
Typical wave soldering or reflow techniques may be  
used to mount M/A-COM’s SMQ packages to circuit  
boards using Sn63/Pb37 alloy or RoHS compliant  
solders. For more information visit the M/A-COM web-  
site and read application note M538 at:http://  
www.macom.com/FileMapServlet/redirect.red?  
o=M538&t=0  
General Handling  
Device can be handled with tweezers or vacuum  
pickups and are suitable for use with automatic  
pick-and-place equipment.  
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions  
is considering for development. Performance is based on target specifications, simulated results,  
and/or prototype measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology  
Solutions has under development. Performance is based on engineering tests. Specifications are  
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.  
Commitment to produce in volume is not guaranteed.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macomtech.com for additional data sheets and product information.  
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make  
changes to the product(s) or information contained herein without notice.  
MADP-000234-10720T  
MELF PIN Diode  
RoHS Compliant  
Rev. V3  
Electrical Specifications @ TA = +25°C  
Minimum  
CW Power  
Dissipation  
Rating  
Nominal Characteristics  
Reverse  
Maximum  
Series Res.  
Maximum  
Capacitance  
Voltage2  
Part Number  
Carrier  
I-Region  
Width  
Typical IF  
RS @100mA  
f = 100MHz  
Ω
CT @100V  
f = 1MHz  
pF  
Lifetime3  
When  
RS = 75Ω  
mA  
IR <10μA  
Volts  
Watts  
μS  
mils  
MADP-000234-10720T  
500  
1.5  
0.25  
3.0  
3.0  
50.0  
Notes  
1. Rs is measured on an HP4191A Impedance Analyzer  
2. Minority Carrier Lifetime Measured at from 50% Control Voltage to 50 % Output Voltage.  
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions  
is considering for development. Performance is based on target specifications, simulated results,  
and/or prototype measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology  
Solutions has under development. Performance is based on engineering tests. Specifications are  
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.  
Commitment to produce in volume is not guaranteed.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macomtech.com for additional data sheets and product information.  
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make  
changes to the product(s) or information contained herein without notice.  

相关型号:

MADP-000234-10720_V3

MELF PIN Diode
TE

MADP-000235-10720T

Non-Magnetic MELF PIN Diode
TE

MADP-000274-001SMB

Quad PIN Diode π Attenuator 10 - 4000 MHz
TE

MADP-000305-12690R

Flip Chip PIN Diode RoHS Compliant
TE

MADP-000404-10720T

Non Magnetic MELF PIN Diode
TE

MADP-000404-10720T_15

Non Magnetic MELF PIN Diode
TE

MADP-000504-10720T

Non Magnetic MELF PIN Diode
TE

MADP-000504-10720T_15

Non Magnetic MELF PIN Diode
TE

MADP-000506-014400

Bolt Channel PIN Diode
TE

MADP-000506-014400_15

Bolt Channel PIN Diode
TE

MADP-000907-13050P

GaAs Flip Chip PIN Diode
TE

MADP-000907-14020P

Solderable AlGaAs Flip Chip PIN
TE