SN74CBT1G384DCKR [TI]
SINGLE FET BUS SWITCH;型号: | SN74CBT1G384DCKR |
厂家: | TEXAS INSTRUMENTS |
描述: | SINGLE FET BUS SWITCH |
文件: | 总13页 (文件大小:578K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74CBT1G384
SINGLE FET BUS SWITCH
www.ti.com
SCDS065G–JULY 1998–REVISED JUNE 2006
FEATURES
•
•
5-Ω Switch Connection Between Two Ports
TTL-Compatible Control Input Levels
DBV PACKAGE
(TOP VIEW)
DCK PACKAGE
(TOP VIEW)
A
B
V
CC
1
2
3
5
1
2
3
5
A
B
V
CC
4
GND
OE
4
OE
GND
See mechanical drawings for dimensions.
DESCRIPTION/ORDERING INFORMATION
The SN74CBT1G384 features a single high-speed line switch. The switch is disabled when the output-enable
(OE) input is high.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74CBT1G384DBVR
SN74CBT1G384DBVT
SN74CBT1G384DCKR
SN74CBT1G384DCKT
TOP-SIDE MARKING(2)
S8D_
Reel of 3000
SOT (SOT-23) – DBV
SOT (SC-70) – DCK
Reel of 250
Reel of 3000
Reel of 250
–40°C to 85°C
S8_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) The actual top-side marking has one additional character that designates the assembly/test site.
FUNCTION TABLE
INPUT
FUNCTION
OE
L
A port = B port
Disconnect
H
LOGIC DIAGRAM (POSITIVE LOGIC)
1
2
B
A
4
OE
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1998–2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74CBT1G384
SINGLE FET BUS SWITCH
www.ti.com
SCDS065G–JULY 1998–REVISED JUNE 2006
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
MAX
UNIT
VCC Supply voltage range
7
V
VI
Input voltage range(2)
Continuous channel current
Input clamp current
7
128
–50
206
252
150
V
mA
mA
IIK
VI/O < 0
DBV package
DCK package
θJA
Package thermal impedance(3)
°C/W
°C
Tstg Storage temperature range
–65
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
MIN
4
MAX
UNIT
V
VCC Supply voltage
5.5
VIH
VIL
TA
High-level control input voltage
2
V
Low-level control input voltage
Operating free-air temperature
0.8
85
V
–40
°C
(1) All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
II = –18 mA
MIN TYP(1)
MAX UNIT
VIK
II
VCC = 4.5 V,
VCC = 5.5 V,
VCC = 5.5 V,
VI = 3 V or 0
VO = 3 V or 0,
VCC = 4 V,
–1.2
±1
1
V
VI = 5.5 V or GND
IO = 0,
µA
µA
pF
pF
ICC
Ci
VI = VCC or GND
Control input
3
4
Cio(OFF)
OE = VCC
TYP at VCC = 4 V,
VI = 2.4 V,
II = 64 mA
II = 30 mA
II = 15 mA
II = 15 mA
14
5
20
7
(2)
ron
VI = 0
Ω
VCC = 4.5 V
5
7
VI = 2.4 V,
10
15
(1) All typical values are at VCC = 5 V (unless otherwise noted), TA = 25°C.
(2) Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. On-state resistance is
determined by the lower voltage of the two (A or B) terminals.
2
Submit Documentation Feedback
SN74CBT1G384
SINGLE FET BUS SWITCH
www.ti.com
SCDS065G–JULY 1998–REVISED JUNE 2006
Switching Characteristics
over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1)
VCC = 5 V
± 0.5 V
VCC = 4 V
MIN
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MAX
0.35
5.5
MIN
MAX
0.25
4.9
(1)
tpd
A or B
OE
B or A
A or B
A or B
ns
ns
ns
ten
1.6
1
tdis
OE
4.5
4.2
(1) The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load
capacitance, when driven by an ideal voltage source (zero output impedance).
3
Submit Documentation Feedback
SN74CBT1G384
SINGLE FET BUS SWITCH
www.ti.com
SCDS065G–JULY 1998–REVISED JUNE 2006
PARAMETER MEASUREMENT INFORMATION
7 V
Open
TEST
S1
S1
500 W
tpd
Open
7 V
From Output
Under Test
GND
tPLZ/tPZL
tPHZ/tPZH
Open
CL = 50 pF
(see Note A)
500 W
3 V
0 V
Output
Control
1.5 V
1.5 V
LOAD CIRCUIT
tPZL
tPLZ
Output
Waveform 1
S1 at 7 V
3.5 V
VOL
3 V
0 V
1.5 V
Input
1.5 V
1.5 V
VOL + 0.3 V
(see Note B)
tPZH
tPHZ
tPLH
tPHL
Output
Waveform 2
S1 at Open
(see Note B)
VOH
0 V
VOH
VOH - 0.3 V
1.5 V
Output
1.5 V
1.5 V
VOL
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
PROPAGATION DELAY TIMES
NOTES: A . CL includes probe and jig capacitance.
B . Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C . All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W, tr £ 2.5 ns, tf £ 2.5 ns.
D . The output is measured with one input transition per measurement.
E . tPLZ and tPHZ are the same as tdis
H . tPZL and tPZH are the same as ten
G . tPLH and tPHL are the same as tpd
.
.
.
Figure 1. Load Circuit and Voltage Waveforms
4
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
74CBT1G384DBVRE4
74CBT1G384DBVRG4
74CBT1G384DBVTE4
74CBT1G384DBVTG4
74CBT1G384DCKRE4
74CBT1G384DCKRG4
74CBT1G384DCKTE4
74CBT1G384DCKTG4
SN74CBT1G384DBVR
SN74CBT1G384DBVT
SN74CBT1G384DCKR
SN74CBT1G384DCKT
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
ACTIVE
SOT-23
SOT-23
SOT-23
SOT-23
SC70
DBV
5
5
5
5
5
5
5
5
5
5
5
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
(S8D2 ~ S8DG ~
S8DJ ~ S8DR)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
DBV
DBV
DBV
DCK
DCK
DCK
DCK
DBV
DBV
DCK
DCK
3000
250
Green (RoHS
& no Sb/Br)
(S8D2 ~ S8DG ~
S8DJ ~ S8DR)
Green (RoHS
& no Sb/Br)
(S8D2 ~ S8DR)
250
Green (RoHS
& no Sb/Br)
(S8D2 ~ S8DR)
3000
3000
250
Green (RoHS
& no Sb/Br)
(S83 ~ S8G ~ S8R ~
S8U)
SC70
Green (RoHS
& no Sb/Br)
(S83 ~ S8G ~ S8R ~
S8U)
SC70
Green (RoHS
& no Sb/Br)
(S83 ~ S8R)
SC70
250
Green (RoHS
& no Sb/Br)
(S83 ~ S8R)
SOT-23
SOT-23
SC70
3000
250
Green (RoHS
& no Sb/Br)
(S8D2 ~ S8DG ~
S8DJ ~ S8DR)
Green (RoHS
& no Sb/Br)
(S8D2 ~ S8DR)
3000
250
Green (RoHS
& no Sb/Br)
(S83 ~ S8G ~ S8R ~
S8U)
SC70
Green (RoHS
& no Sb/Br)
(S83 ~ S8R)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
25-Aug-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74CBT1G384DBVR SOT-23
SN74CBT1G384DBVR SOT-23
SN74CBT1G384DBVT SOT-23
DBV
DBV
DBV
DCK
DCK
5
5
5
5
5
3000
3000
250
178.0
180.0
180.0
178.0
180.0
9.0
8.4
8.4
9.0
8.4
3.23
3.23
3.23
2.4
3.17
3.17
3.17
2.5
1.37
1.37
1.37
1.2
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
SN74CBT1G384DCKR
SN74CBT1G384DCKT
SC70
SC70
3000
250
2.25
2.4
1.22
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
25-Aug-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74CBT1G384DBVR
SN74CBT1G384DBVR
SN74CBT1G384DBVT
SN74CBT1G384DCKR
SN74CBT1G384DCKT
SOT-23
SOT-23
SOT-23
SC70
DBV
DBV
DBV
DCK
DCK
5
5
5
5
5
3000
3000
250
180.0
202.0
202.0
180.0
202.0
180.0
201.0
201.0
180.0
201.0
18.0
28.0
28.0
18.0
28.0
3000
250
SC70
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明