TFS111B [VECTRON]
Filter specification; 过滤器规格型号: | TFS111B |
厂家: | Vectron International, Inc |
描述: | Filter specification |
文件: | 总5页 (文件大小:156K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedances *)
for input:
23°C
0dBm
3,2 kΩ ||- 5,6pF
3,1 kΩ || -6.2pF
for output:
Characteristics
Remark:
The reference level for the relative attenuation a of TFS 111B is the minimum of the pass band attenuation a
. This value is defined as the
min
rel
insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 20,0 dB filter attenuation level
e
c
relative to the insertion loss a
e.
D a t a
typ. value
tolerance / limit
Insertion loss
a
= a
e min
7
111
1
dB
11
± 60
2
dB
(reference level)
Centre frequency
f
(30 dB-BW)
kHz
c
MHz
dB
kHz
dB
Relative attenuation
a
rel
f
-
500
kHz ... f + 500
max.
c
c
f
c
f
c
f
c
±
±
±
1
2
3
MHz ... f
MHz ... f
MHz ... f
±
±
±
2
3
MHz
MHz
MHz
22
33
45
dB
dB
dB
min. 20
min. 30
min. 40
dB
dB
dB
c
c
c
10
**)
Group delay
Ripple ± 500 kHz
GD
f
300
ns
max 500
-
ns
c
Temperature coefficient
TC 2nd order **)
- 0,032 ppm/K²
Frequency inversion temperature To
25
°C
Operating temperature range
Storage temperature range
- 10 °C ... + 60 °C
- 40 °C ... + 85 °C
Input power level
-
max. + 10
dBm
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) - ∆f (Hz) = TC (ppm/K²) x (T - To)² x FTo (MHz)
Generated:
Checked / approved:
VI TELEFILTER
Vectron International, Inc.
267 Lowell Road
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: tft@telefilter.com
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
2/5
Construction and pin connection
(All dimensions in mm)
1
Ground
2
Ground
S 111 B
P09
3
Output RF Return
Output
4
5
Ground
6
Ground
1
3
7
Ground
8
Ground
9
Input RF Return
Input
10
11
12
Ground
7,2 Max.
2,54+-0,2
Ground
Datecode:
Year+week
2000
M
N
P
2001
2002
...
0,8
50 Ω test circuit
L1
10
L2
4
Input
50 Ohm
Input
50 Ohm
SAW
C1
C2
1,2,3,5,6,7,
8,9,11,12
VI TELEFILTER
Vectron International, Inc.
267 Lowell Road
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
3/5
Stability Characteristics:
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
temperature:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
-55 °C to 125°C / 30 min each. / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing:
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Reel of empty components at start:
Reel of empty components at start including leader:
Trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER TAPE
W
Po
:
:
16
4
± 0,3
± 0,1
2
Po
P
D
o
Do
E
F
G (min) :
P2
:
1,5 + 0,1
E
F
:
:
1,75 ± 0,1
7,5 ± 0,1
0,6
o
A
1
D
W
o
B
Ct
:
2
± 0,1
P1
:
8
± 0,1
G
D1(min) : 1,5
Ao
Bo
Ct
:
:
:
5,5 ± 0,1
7,5 ± 0,1
13,5+/-0,1
P1
COVER TAPE
W
2
Reel (all dimensions in mm):
A
:
330
W1
:
16,4 +2
22,4
W2 (max) :
N (min)
C
:
:
50
C
A
13 + 0,5
- 0,2
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER
Vectron International, Inc.
267 Lowell Road
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
Filter specification
TFS 111B
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
pre-heating periods
main-heating periods
over 200 °C
peak temperature
255 °C ± 5 °C
Temperature:
Time:
150 °C - 170 °C
60 sec. - 90 sec.
20 sec. - 25 sec.
Air reflow profile
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
temperature / °C
time / sec.
140
temperature / °C
23
34
160
161
164
170
180
205
230
255
230
205
180
165
140
120
10
150
20
46
160
30
60
170
40
80
180
50
103
121
134
143
150
154
156
158
159
190
60
195
70
200
80
205
90
210
100
110
120
130
215
220
230
240
VI TELEFILTER
Vectron International, Inc.
267 Lowell Road
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
file: tfs111b.doc
26.02.2002
version 2.0
VI TELEFILTER
History
Filter specification
TFS 111B
5/5
Version
Reason of Changes
Name
Date
Development specification
1.1.
- passband ripple: 3dB Î 1.5 dB
Steiner
Steiner
08.05.2000
28.07.2000
- new datecode introduced and explained
1.2.
- complete specification
- passband ripple, group delay ripple, attenuation at fc+-1MHz
changed according to agreements with customer
Filter specification
2.0
- typical values and terminating impedance added
Steiner
26.02.2002
VI TELEFILTER
Vectron International, Inc.
267 Lowell Road
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号:
©2020 ICPDF网 联系我们和版权申明