TFS115C [VECTRON]
Filter specification; 过滤器规格
| 型号： | TFS115C |
| 厂家： | 
Vectron International, Inc |
| 描述： | Filter specification |
| 文件： | 总5页 (文件大小：219K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Filename: tfs 115c.doc
Version 1.6
03.02.2006
VI TELEFILTER
Filter specification
TFS 115C
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
20
0
°C
dBm
297 Ω || -28 pF
235 Ω || -35 pF
Output:
Characteristics
Remark:
The reference level for the relative attenuation a of the TFS 115C is the minimum of the pass band attenuation a
. The minimum of the pass band
rel
min
attenuation a
min
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 1 dB
e c
filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at 115,2 MHz without any tolerance. The given values for both the
e
N
relative attenuation a and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency f is shifted due to the
rel
c
temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .
f
c
D a t a
typ. value
tolerance / limit
Insertion loss
a
7,4
dB
max.
10
dB
e
(reference level)
Nominal frequency
Passband
fN
-
115,2
MHz
PB
p-p
-
fN
±
1,92 MHz
Pass band ripple
Relative attenuation
fN
0,5
dB
dB
max.
1
dB
a
rel
... fN
±
1,92 MHz
0,7
max.
3
dB
fN
fN
±
±
25
10
MHz ... fN
MHz ... fN
±
±
10
5
MHz
MHz
52
45
dB
dB
min.
min.
38
32
dB
dB
Absolute Group delay in PB
Group delay ripple in PB
Input power level **
p-p
p-p
0,76
µs
ns
max.
max.
max.
0,85 µs
65
-
150
10
ns
dBm
Operating temperature range
Storage temperature range
OTR
-
-
-10 °C..... +85 °C
-40 °C..... +85 °C
-
Temperature coefficient of frequency
TC ***
-27
ppm/K
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values
only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) Maximum value for 10 years operation.
***) ∆f (Hz) = TCf(ppm/K) x (T - To) x fTo (MHz).
c
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 115c.doc
Version 1.6
03.02.2006
VI TELEFILTER
Filter specification
TFS 115C
2/5
Filter characteristic
0
0
-1
1.81
1.69
1.57
1.45
1.33
1.21
1.09
0.97
0.85
0.73
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-2
-3
-4
-5
-6
-7
-8
-9
-10
0.61
70.2
79.2
88.2
97.2
106.2
115.2
124.2
133.2
142.2
151.2
160.2
112.2
112.8
113.4
114
114.6
115.2
115.8
116.4
117
117.6
118.2
frequency in MHz
frequency in MHz
Construction and pin connection
(All dimensions in mm)
1
2
3
4
5
6
7
8
Ground
Ground
Ground
Output
Output RF Return
Ground
S 115C
●
U05
Ground
Ground
9
Input
10
Input RF Return
Date code
Date code: Year + week
U
V
W
...
2006
2007
2008
50 Ohm Test circuit
4
L1
9
L2
SAW
10
5
C1
C2
1, 2, 3, 6, 7, 8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 115c.doc
Version 1.6
03.02.2006
VI TELEFILTER
Filter specification
TFS 115C
3/5
Stability characteristics
1. High Temperature (IEC 60068 -3-1)
1,000 hours at +85C
2. Low Temperature (IEC 60068 -3-1)
1,000 hours at – 40C
3. Humidity (IEC 60068 -2-78)
1,000 hours at 85% /85C
4. Thermal Shock ( IEC60068-2-14 )
-55 °C to 125°C / 30 min. each / 10 cycles
5. Vibration (IEC 60068 -2-6)
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans
6. Shock (IEC 60068 -2-27)
500g, 1 ms, half sine wave, 3 shocks each plane
7. Reflow Profile ( defined at specification )
260°C +/- 5°C for 10 seconds, 2 cycles
8. Solerability
235°C +/- 5°C for 15 seconds, 1 cycle
9. Pullability, Distortion
according to MIL-STD 883 method 2004.5 Condition D
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
Tape (all dimensions in mm)
W
Po
Do
E
: 16,00 ± 0,3
Po
P2
PIN Marker
t
Do
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1
1,50 +0,1/-0
1,75 ± 0,1
7,50 ± 0,1
0,60
2,00 ± 0,1
8,00 ± 0,1
1,50
F
G(min)
P2
P1
D1(min)
Ao
Bo
Ko
Date Code
Typ
D1
Ao
5,50 ± 0,1
7,50 ± 0,1
Ct
: 13,5 ± 0,1
W
2
Reel (all dimensions in mm)
A
:330
W1
: 16,4 +2/-0
W2(max) : 22,4
N(min)
C
: 50
: 13,0 +0,5/-0,2
C
A
N
W
1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 115c.doc
Version 1.6
03.02.2006
VI TELEFILTER
Filter specification
TFS 115C
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 115c.doc
Version 1.6
03.02.2006
VI TELEFILTER
Filter specification
TFS 115C
5/5
History :
Version
Reason of Changes
Name
Date
1.0
1.1
Generate development specification
Chilla
Chilla
2.11.2004
9.11.2004
changed insertion loss
changed relative attenuation
1.2
1.3
reduced insertion loss to 10dB
Chilla
Chilla
29.11.2004
14.12.2004
added absolute group delay in PB
changed package
1.4
changed stability characteristics
changed date code
Chilla
05.01.2005
changed packing
changed air reflow temperature conditions
customer reliability requirement added
1.5
1.6
Steiner
Chilla
15.02.2005
03.02.2006
generate filter specification
terminating impedances added
typical values added
filter characteristics added
test circuit added
ROHS compliance added
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号：
©2020 ICPDF网 联系我们和版权申明