IRFP9140 [VISHAY]

Power MOSFET; 功率MOSFET


型号：	IRFP9140
厂家：	VISHAY
描述：	Power MOSFET 功率MOSFET 晶体晶体管功率场效应晶体管开关脉冲局域网
文件：	总8页 (文件大小：1449K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

IRFP9140, SiHFP9140

Vishay Siliconix

Power MOSFET

FEATURES

• Dynamic dV/dt Rating

PRODUCT SUMMARY

V_DS(V)

- 100

• Repetitive Avalanche Rated

• P-Channel

RoHS

R_DS(on)(Ω)

V_GS= - 10 V

0.20

COMPLIANT

Q_g(Max.) (nC)

• Isolated Central Mounting Hole

• 175 °C Operating Temperature

• Fast Switching

_gs(nC)

_gd(nC)

Configuration

Single

• Ease of Paralleling

• Lead (Pb)-free Available

TO-247

DESCRIPTION

Third generation Power MOSFETs from Vishay provide the

designer with the best combination of fast switching,

ruggedized device design, low on-resistance and

cost-effectiveness.

The TO-247 package is preferred for commercial-industrial

applications where higher power levels preclude the use of

TO-220 devices. The TO-247 is similar but superior to the

earlier TO-218 package because of its isolated mouting hole.

It also provides greater creepage distance between pins to

meet the requirements of most safety specifications.

P-Channel MOSFET

ORDERING INFORMATION

Package

TO-247

IRFP9140PbF

SiHFP9140-E3

IRFP9140

Lead (Pb)-free

SnPb

SiHFP9140

ABSOLUTE MAXIMUM RATINGS T_C= 25 °C, unless otherwise noted

PARAMETER

SYMBOL

LIMIT

- 100

UNIT

Drain-Source Voltage

Gate-Source Voltage

V_DS

V_GS

T_C= 25 °C

T_C=100°C

- 21

Continuous Drain Current

V_GSat - 10 V

I_D

- 15

Pulsed Drain Current^a

I_DM

- 84

Linear Derating Factor

1.2

W/°C

Single Pulse Avalanche Energy^b

Repetitive Avalanche Current^a

Repetitive Avalanche Energy^a

E_AS

I_AR

960

- 21

E_AR

Maximum Power Dissipation

_C= 25 °C

P_D

180

Peak Diode Recovery dV/dt^c

dV/dt

T_J, T_stg

- 5.5

- 55 to + 175

300^d

V/ns

Operating Junction and Storage Temperature Range

Soldering Recommendations (Peak Temperature)

°C

for 10 s

6-32 or M3 screw

lbf · in

N · m

Mounting Torque

1.1

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. V_DD= - 25 V, starting T_J= 25 °C, L = 3.3 mH, R_G= 25 Ω, I_AS= - 21 A (see fig. 12).

c. I_SD≤ - 21 A, dI/dt ≤ 200 A/µs, V_DD≤ V_DS, T_J≤ 175 °C.

d. 1.6 mm from case.

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

www.vishay.com

WORK-IN-PROGRESS

IRFP9140, SiHFP9140

Vishay Siliconix

THERMAL RESISTANCE RATINGS

PARAMETER

SYMBOL

TYP.

MAX.

UNIT

Maximum Junction-to-Ambient

Case-to-Sink, Flat, Greased Surface

Maximum Junction-to-Case (Drain)

R_thJA

R_thCS

R_thJC

0.24

°C/W

0.83

SPECIFICATIONS T_J= 25 °C, unless otherwise noted

PARAMETER

SYMBOL

TEST CONDITIONS

MIN.

TYP.

MAX.

UNIT

Static

Drain-Source Breakdown Voltage

V_DSTemperature Coefficient

Gate-Source Threshold Voltage

Gate-Source Leakage

V_DS

ΔV_DS/T_J

V_GS(th)

I_GSS

V_GS= 0 V, I_D= - 250 µA

Reference to 25 °C, I_D= - 1 mA

V_DS= V_GS, I_D= - 250 µA

- 100

V/°C

- 0.087

- 2.0

- 4.0

100

- 100

- 500

0.20

V_GS

V_DS= - 100 V, V_GS= 0 V

_DS= - 80 V, V_GS= 0 V, T_J= 150 °C

V_GS= - 10 V

I_D= - 13 A^b

V_DS= - 50 V, I_D= - 13 A^b

20 V

Zero Gate Voltage Drain Current

I_DSS

µA

Drain-Source On-State Resistance

Forward Transconductance

Dynamic

R_DS(on)

g_fs

6.2

Input Capacitance

Output Capacitance

Reverse Transfer Capacitance

Total Gate Charge

Gate-Source Charge

Gate-Drain Charge

Turn-On Delay Time

Rise Time

C_iss

C_oss

C_rss

Q_g

1400

590

140

V_GS= 0 V,

_DS= - 25 V,

f = 1.0 MHz, see fig. 5

I_D= - 19 A, V_DS= - 80 V,

see fig. 6 and 13^b

Q_gs

Q_gd

t_d(on)

t_r

V_GS= - 10 V

_DD= - 50 V, I_D= - 19 A,

Turn-Off Delay Time

Fall Time

t_d(off)

t_f

_G= 9.1 Ω, R_D= 2.4 Ω, see fig. 10^b

Between lead,

Internal Drain Inductance

Internal Source Inductance

L_D

L_S

5.0

6 mm (0.25") from

package and center of

die contact

Drain-Source Body Diode Characteristics

MOSFET symbol

showing the

integral reverse

p - n junction diode

Continuous Source-Drain Diode Current

I_S

- 21

- 84

Pulsed Diode Forward Current^a

I_SM

Body Diode Voltage

V_SD

t_rr

T_J= 25 °C, I_S= - 21 A, V_GS= 0 V^b

- 5.0

260

Body Diode Reverse Recovery Time

Body Diode Reverse Recovery Charge

Forward Turn-On Time

130

0.35

µC

T_J= 25 °C, I_F= - 19 A, dI/dt = 100 A/µs^b

Q_rr

t_on

0.70

Intrinsic turn-on time is negligible (turn-on is dominated by L_Sand L_D)

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. Pulse width ≤ 300 µs; duty cycle ≤ 2 %.

www.vishay.com

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

IRFP9140, SiHFP9140

Vishay Siliconix

TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted

Fig. 1 - Typical Output Characteristics, T_C= 25 °C

Fig. 3 - Typical Transfer Characteristics

Fig. 2 - Typical Output Characteristics, T_C= 175 °C

Fig. 4 - Normalized On-Resistance vs. Temperature

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

www.vishay.com

IRFP9140, SiHFP9140

Vishay Siliconix

Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage

Fig. 7 - Typical Source-Drain Diode Forward Voltage

Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage

Fig. 8 - Maximum Safe Operating Area

www.vishay.com

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

IRFP9140, SiHFP9140

Vishay Siliconix

R_D

V_DS

V_GS

D.U.T.

R_G

V_DD

- 10 V

Pulse width ≤ 1 µs

Duty factor ≤ 0.1 %

Fig. 10a - Switching Time Test Circuit

t_d(on)t_r

t_d(off)t_f

V_GS

10 %

90 %

V_DS

Fig. 10b - Switching Time Waveforms

Fig. 9 - Maximum Drain Current vs. Case Temperature

Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

www.vishay.com

IRFP9140, SiHFP9140

Vishay Siliconix

I_AS

V_DS

Vary t_pto obtain

required I_AS

V_DS

D.U.T

I_AS

R_G

V_DD

t_p

- 10 V

0.01 Ω

t_p

V_DS

Fig. 12a - Unclamped Inductive Test Circuit

Fig. 12b - Unclamped Inductive Waveforms

Fig. 12c - Maximum Avalanche Energy vs. Drain Current

Current regulator

Same type as D.U.T.

50 kΩ

Q_G

- 10 V

12 V

0.2 µF

0.3 µF

Q_GS

Q_GD

D.U.T.

V_G

V_GS

- 3 mA

Charge

I_G

I_D

Current sampling resistors

Fig. 13b - Gate Charge Test Circuit

Fig. 13a - Basic Gate Charge Waveform

www.vishay.com

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

IRFP9140, SiHFP9140

Vishay Siliconix

Peak Diode Recovery dV/dt Test Circuit

D.U.T.

Circuit layout considerations

• Low stray inductance

• Ground plane

• Low leakage inductance

current transformer

R_G

• dV/dt controlled by R_G

• I_SDcontrolled by duty factor "D"

• D.U.T. - device under test

V_DD

Compliment N-Channel of D.U.T. for driver

Driver gate drive

P.W.

Period

D =

P.W.

= - 10 V*

D.U.T. I waveform

Reverse

recovery

current

Body diode forward

current

dI/dt

D.U.T. V waveform

Diode recovery

dV/dt

Re-applied

voltage

Body diode forward drop

Ripple ≤ 5 %

Inductor current

* V_GS= - 5 V for logic level and - 3 V drive devices

Fig. 14 - For P-Channel

Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon

Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and

reliability data, see http://www.vishay.com/ppg?91238.

Document Number: 91238

S-Pending-Rev. A, 26-Jun-08

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

IRFP9140 [VISHAY]

相关型号：

IRFP9140N

IRFP9140NHR

IRFP9140NPBF

IRFP9140PBF

IRFP9140PBF

IRFP9140R

IRFP9141

IRFP9141R

IRFP9142

IRFP9142R

IRFP9143

IRFP9143PBF