TSMP58000 [VISHAY]
IR Sensor Module for Remote Control Systems; 红外传感器模块的远程控制系统
| 型号： | TSMP58000 |
| 厂家： | 
VISHAY |
| 描述： | IR Sensor Module for Remote Control Systems |
| 文件： | 总5页 (文件大小：109K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
New Product
TSMP58000
Vishay Semiconductors
www.vishay.com
IR Sensor Module for Remote Control Systems
FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
data formats
• Improved shielding against electrical field
disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the device works in
the range between 2.0 V and 5.5 V
19026
• Carrier out signal for code learning functions
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Pinning:
1 = Carrier OUT, 2 = GND, 3 = VS
DESCRIPTION
The TSMP58000 is a miniaturized sensor for receiving the
modulated signal of infrared remote control systems. A PIN
diode and preamplifier are assembled on a lead frame, the
epoxy package is designed as an IR filter. The modulated
output signal, carrier out, can be used for code learning
applications.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
CARRIER FREQUENCY
20 kHz to 60 kHz
CODE LEARNING APPLICATIONS
TSMP58000
BLOCK DIAGRAM
APPLICATION CIRCUIT
19750-1
R1 = 100 Ω
VS
Transmitter
with
TSALxxxx
TSOPxxxx
3 VS
+ VS
C1 =
4.7 µF
R2 =
4.7 kΩ
µC
1 Carrier out
2 GND
OUT
GND
VO
TIA
Amp
Signal shaping
GND
R1 + C1 recommended to suppress power supply
disturbances.
19746
R2 recommended to get faster slopes and a correct
high level of the output pulses.
Rev. 1.0, 14-Mar-12
Document Number: 82485
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
TSMP58000
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
- 0.3 to + 6
- 0.3 to (VS + 0.3)
5
UNIT
V
Supply voltage (pin 3)
Output voltage (pin 1)
Output current (pin 1)
Junction temperature
Storage temperature range
Operating temperature range
Soldering temperature
VS
VO
V
IO
mA
°C
°C
°C
°C
Tj
100
Tstg
Tamb
Tsd
- 25 to + 85
- 25 to + 85
260
t ≤ 10 s, 1 mm from case
Note
•
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability.
ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT
(Tamb = 25 °C, unless otherwise specified, VS = 3 V)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
0.55
2.5
TYP.
MAX.
0.9
UNIT
mA
V
Supply current (pin 3)
Supply voltage
Ev = 0
ISD
VS
0.7
5.5
Ev = 0, test signal see fig. 1,
IR diode TSAL6200,
IF = 400 mA
Transmission distance
d
5
m
Output voltage low (pin 1)
Minimum irradiance
Maximum irradiance
Directivity
IOSL = 0.5 mA, test signal see fig. 1
VS = 3 V, (20 kHz to 60 kHz)
VOSL
Ee min.
Ee max.
ϕ1/2
250
25
mV
mW/m2
W/m2
deg
12
80
45
test signal see fig. 1, (20 kHz to 60 kHz)
Angle of half transmission distance
50
fC = 20 kHz to 60 kHz,
Ee = 25 mW/m2 to 50 W/m2,
testsignal see fig. 1, BER ≤ 2%
N
inputburst
length
- 1 cycle
inputburst
length
+ 1 cycle
inputburst
length
Output accuracy
carrier
pulses
counts
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Carrier cycle
(26.3 μs in case of 38 kHz)
Optical burst
(input signal)
Delay time td
Output voltage
Fig. 1 - Testsignal
Rev. 1.0, 14-Mar-12
Document Number: 82485
2
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
TSMP58000
Vishay Semiconductors
www.vishay.com
1.2
1.0
0.8
0.6
0.4
0.2
0
750
850
950
1050
1150
94 8408
λ - Wavelength (nm)
Fig. 2 - Relative Spectral Sensitivity vs. Wavelength
0°
10°
20°
30°
40°
1.0
0.9
0.8
50°
60°
70°
80°
0.7
0.6
0.4
drel - Relative Transmission Distance
Fig. 3 - Horizontal Directivity
0.2
0
19258
0°
10°
20°
30°
40°
1.0
0.9
0.8
50°
60°
70°
80°
0.7
0.6
0.4
0.2
0
d
- Relative Transmission Distance
19259
rel
Fig. 4 - Vertical Directivity
Rev. 1.0, 14-Mar-12
Document Number: 82485
3
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
TSMP58000
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters
5
4.8
(4)
2.8
R 2
(1.54)
0.85 max.
0.5 max.
1.2 0.2
2.54 nom.
0.7 max.
2.54 nom.
Marking area
technical drawings
according to DIN
specifications
Not indicated to lerances 0.2
Drawing-No.: 6.550-5263.01-4
Issue: 12; 16.04.10
19009
R 2
Rev. 1.0, 14-Mar-12
Document Number: 82485
4
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明