VS-15MQ040-M3/5AT [VISHAY]
DIODE 40 V, SILICON, RECTIFIER DIODE, HALOGEN FREE AND ROHS COMPLIANT, SIMILAR TO D-64, SMA, 2 PIN, Rectifier Diode;型号: | VS-15MQ040-M3/5AT |
厂家: | VISHAY |
描述: | DIODE 40 V, SILICON, RECTIFIER DIODE, HALOGEN FREE AND ROHS COMPLIANT, SIMILAR TO D-64, SMA, 2 PIN, Rectifier Diode PC 光电二极管 |
文件: | 总6页 (文件大小:122K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-15MQ040-M3
Vishay Semiconductors
www.vishay.com
Schottky Rectifier, 1.5 A
FEATURES
• Extremely low forward voltage drop
• Guard ring for enhanced ruggedness and long
term reliability
Cathode
Anode
• Halogen-free according to IEC 61249-2-21
definition
• Surface mountable
• Compact size
DO-214AC (SMA)
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Compliant to RoHS Directive 2002/95/EC
PRODUCT SUMMARY
APPLICATIONS
Package
DO-214AC (SMA)
• Switching power supplies
• Meter protection
IF(AV)
1.5 A
40 V
VR
• Reverse protection for power input to PC board circuits
• Battery isolation and charging
• Low threshold voltage diode
• Freewheeling or by-pass diode
• Low voltage clamp
VF at IF
IRM
0.34 V
20 mA at 125 °C
150 °C
TJ max.
Diode variation
EAS
Single die
6.0 mJ
DESCRIPTION
The VS-15MQ040-M3 Schottky rectifier is designed to be
used for low power applications where a reverse voltage of
40 V is encountered and surface mountable is required.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
VRRM
IFSM
CHARACTERISTICS
VALUES
1.5
UNITS
DC
A
V
40
tp = 5 μs sine
2 Apk, TJ = 125 °C
Range
330
A
VF
0.43
V
TJ
- 40 to 150
°C
VOLTAGE RATINGS
PARAMETER
SYMBOL
VR
VS-15MQ040-M3
40
UNITS
Maximum DC reverse voltage
V
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
50 % duty cycle at TL = 105 °C, rectangular waveform
On PC board 9 mm2 island
2.1
(0.013 mm thick copper pad area)
Maximum average forward current
See fig. 4
IF(AV)
A
50 % duty cycle at TL = 113 °C, rectangular waveform
On PC board 9 mm2 island
1.5
(0.013 mm thick copper pad area)
Maximum peak one cycle
non-repetitive surge current
See fig. 6
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
TJ = 25 °C, IAS = 1 A, L = 12 mH
Following any rated
load condition and with
rated VRRM applied
330
140
6.0
IFSM
EAS
IAR
A
Non-repetitive avalanche energy
mJ
A
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
Repetitive avalanche current
1.0
Revision: 12-Oct-11
Document Number: 93366
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-15MQ040-M3
Vishay Semiconductors
www.vishay.com
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
0.43
0.49
0.34
0.43
0.5
UNITS
1.5 A
TJ = 25 °C
2 A
Maximum forward voltage drop
See fig. 1
(1)
VFM
V
1.5 A
TJ = 125 °C
2 A
TJ = 25 °C
TJ = 125 °C
Maximum reverse leakage current
See fig. 2
IRM
VR = Rated VR
mA
20
Threshold voltage
VF(TO)
rt
0.26
64.6
134
V
TJ = TJ maximum
Forward slope resistance
Typical junction capacitance
Typical series inductance
Maximum voltage rate of change
m
pF
CT
VR = 10 VDC, TJ = 25 °C, test signal = 1 MHz
Measured lead to lead 5 mm from package body
Rated VR
LS
2.0
nH
dV/dt
10 000
V/μs
Note
(1)
Pulse width = 300 μs, duty cycle = 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum junction and storage
temperature range
TJ (1), TStg
- 40 to 150
°C
Maximum thermal resistance,
junction to ambient
RthJA
DC operation
80
°C/W
0.07
g
Approximate weight
0.002
oz.
Marking device
Case style SMA (similar D-64)
XF
Note
dPtot
1
(1)
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dTJ RthJA
Revision: 12-Oct-11
Document Number: 93366
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-15MQ040-M3
Vishay Semiconductors
www.vishay.com
10
150
140
130
120
110
100
90
DC
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
1
80
70
60
50
Square wave (D = 0.50)
80 % rated VR applied
40
See note (1)
0.5
0.1
0.2
30
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0
1.0
1.5
2.0
2.5
3.0
VFM - Forward Voltage Drop (V)
IF(AV) - Average Forward Current (A)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 4 - Maximum Average Forward Current vs.
Allowable Lead Temperature
100
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
TJ = 150 °C
D = 0.20
D = 0.25
D = 0.33
D = 0.50
10
TJ = 125 °C
TJ = 100 °C
1
D = 0.75
RMS limit
TJ = 75 °C
0.1
TJ = 50 °C
DC
0.01
TJ = 25 °C
0.001
0
5
10
15
20
25
30
35
40
0
0.5
1.0
1.5
2.0
2.5
3.0
IF(AV) - Average Forward Current (A)
VR - Reverse Voltage (V)
Fig. 2 - Typical Peak Reverse Current vs.
Reverse Voltage
Fig. 5 - Maximum Average Forward Dissipation vs.
Average Forward Current
1000
100
10
1000
At any rated load condition
and with rated VRRM applied
following surge
TJ = 25 °C
100
0
5
10 15 20 25 30 35 40 45
10
100
10 000
1000
VR - Reverse Voltage (V)
tp - Square Wave Pulse Duration (µs)
Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Note
(1)
Formula used: TC = TJ - (Pd + PdREV) x RthJC
;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Revision: 12-Oct-11
Document Number: 93366
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-15MQ040-M3
Vishay Semiconductors
www.vishay.com
ORDERING INFORMATION TABLE
Device code
VS-
15
M
Q
040 -M3
1
2
3
4
5
6
1
2
3
4
5
6
-
-
-
-
-
-
Vishay Semiconductors product suffix
Current rating
M = SMA
Q = Schottky “Q” series
Voltage rating (040 = 40 V)
Environmental digit:
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
VS-15MQ040-M3/5AT
5AT 7500
13" diameter plastic tape and reel
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95400
Part marking information
Packaging information
www.vishay.com/doc?95403
www.vishay.com/doc?95404
Revision: 12-Oct-11
Document Number: 93366
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
SMA
DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.066 (1.68)
MIN.
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Document Number: 95400
Revision: 09-Jul-10
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
VS-15MQ040HM3/5AT
Rectifier Diode, Schottky, 1 Phase, 1 Element, 40V V(RRM), Silicon, DO-214AC, HALOGEN FREE AND ROHS COMPLIANT, SMA, SIMILAR TO D-64, 2 PIN
VISHAY
VS-15TQ060S-M3
Rectifier Diode, Schottky, 1 Phase, 1 Element, 60V V(RRM), Silicon, TO-263AB, D2PAK-3/2
VISHAY
VS-15TQ060STRLPBF
Rectifier Diode, Schottky, 1 Phase, 1 Element, 15A, 60V V(RRM), Silicon, HALOGEN FREE AND ROHS COMPLIANT, PLASTIC, D2PAK-3
VISHAY
VS-15TQ060STRR-M3
Rectifier Diode, Schottky, 1 Phase, 1 Element, 60V V(RRM), Silicon, TO-263AB, D2PAK-3/2
VISHAY
©2020 ICPDF网 联系我们和版权申明