SOD6.5CA [WEEN]
200W Transient Voltage Suppressor;
| 型号： | SOD6.5CA |
| 厂家： | 
WeEn Semiconductors |
| 描述： | 200W Transient Voltage Suppressor |
| 文件： | 总7页 (文件大小：576K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SOD Series
200W Transient Voltage Suppressor
Rev.01 - 23 December 2020
Product data sheet
1. General description
SOD series, 200W transient voltage suppressor (TVS) in SOD123
package, designed to protect electronic circuit which induced by
lightning surge or other transient voltage situation.
2. Features and benefits
•
•
•
•
•
•
•
•
•
•
Peak pulse power 200W @ 10/1000μs waveform
Excellent clamping capability
Low incremental surge resistance
Surface mount package for easy assembly and board space saving
Typical IR < 1μA When VR > 12V
Fast response time: Typically less than 1.0ps from 0V to BV min
IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)
EFT protection of data lines in accordance with IEC 61000-4-4
High temperature to reflow soldering guaranteed: 260°C/10sec
Meet UL94V-0 flammability classification which guaranteed by
mold compound
Bi-directional
Cathode
Anode
Uni-directional
•
•
•
Meet MSL level1, per J-STD-020
Lead free lead finish
Halogen free and RoHS compliant
3. Applications
alogen-Free
RoHS
h
•
•
•
•
Power supply protection
Industrial application
Power management
I/O interface protection
4. Ordering information
Type number
Package
name
Orderable part number Packing
method
Small packing Package
Package
issue date
quantity
version
SODxxxXX
SOD123
SODxxxXXX
Tape and reel
3000
SOD123J
18-Oct-2020
eg. SOD5.0CA
SOD123
SOD5.0CAX
Tape and reel
3000
SOD123J
18-Oct-2020
5. Absolute maximum ratings
In accordance with the Absolute Maximum Rating System (IEC 60134).
Tj = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
Values
Unit
Absolute maximum rating
PPPM
PM(AV)
IFSM
peak pulse power
[1]
200
1
W
W
A
steady state power dissipation on infinite heatsink at T = 50 °C
a
peak forward surge current
tp = 8.3 ms; single half sine-wave pulse;
duty cycle = 4 pulses per minute
maximum; unidirectional units only
30
T
storage temperature range
operating temperature range
-65 to 150
-65 to 150
°C
°C
stg
Tj
[1] In accordance with IEC 61643-321 (10/1000 μs current waveform).
WeEn Semiconductors
SOD series
200W Transient Voltage Suppressor
6. Characteristics
Tj = 25 °C unless otherwise specified.
PN
PN
Reverse
Breakdown
Test
Max.
Max. Peak Maximum
Marking
(Uni)
(Bi)
Stand off Voltage VBR
@
current Clamping
Pulse
Current
Ipp
Reverse
Leakage
IR @ VR
(μA)
Voltage
VR
IT
(V)
IT
(mA)
Voltage VC
@ Ipp
(V)
(V)
(A)
Min
6.45
6.8
Max
Uni
Bi
05
06
6F
07
08
09
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
SOD5.0A
SOD6.0A
SOD6.5A
SOD7.0A
SOD8.0A
SOD9.0A
SOD10A
SOD11A
SOD12A
SOD13A
SOD14A
SOD15A
SOD16A
SOD17A
SOD18A
SOD20A
SOD22A
SOD24A
SOD26A
SOD28A
SOD30A
SOD33A
SOD36A
SOD40A
SOD43A
SOD45A
SOD48A
SOD51A
SOD54A
SOD58A
SOD60A
SOD64A
SOD70A
SOD75A
SOD78A
SOD85A
SOD5.0CA
SOD6.0CA
SOD6.5CA
SOD7.0CA
SOD8.0CA
SOD9.0CA
SOD10CA
SOD11CA
SOD12CA
SOD13CA
SOD14CA
SOD15CA
SOD16CA
SOD17CA
SOD18CA
SOD20CA
SOD22CA
SOD24CA
SOD26CA
SOD28CA
SOD30CA
SOD33CA
SOD36CA
SOD40CA
SOD43CA
SOD45CA
SOD48CA
SOD51CA
SOD54CA
SOD58CA
SOD60CA
SOD64CA
SOD70CA
SOD75CA
SOD78CA
SOD85CA
5
6
6.98
7.32
7.92
8.57
9.76
10
10
10
10
1
9.2
10.3
11.2
12
21.7
19.4
17.9
16.7
14.7
13
200
200
150
75
25
5
05
06
6F
07
08
09
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
6.5
7
7.27
7.82
8.95
8
13.6
15.4
17
9
10.08 11.03
11.21 12.19
12.32 13.38
13.43 14.57
14.51 15.79
15.72 17.08
16.83 18.37
17.93 19.56
19.08 20.72
1
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
1
11.8
11.1
10.1
9.3
8.6
8.2
7.7
7.2
6.8
6.2
5.6
5.1
4.8
4.4
4.1
3.8
3.4
3.1
2.9
2.8
2.6
2.4
2.3
2.1
2.1
1.9
1.7
1.6
1.6
1.5
2.5
2.5
2.5
1
1
18.2
19.9
21.5
23.2
24.4
26
1
1
1
1
1
1
1
1
1
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
1
20.19
21.9
1
1
22.41 24.28
24.63 26.66
26.95 29.23
29.12 31.67
31.33 34.16
33.55 36.54
1
1
1
1
1
1
1
1
1
1
1
1
36.98
40.3
44.7
48.2
50.4
53.7
57.1
60.5
64.9
67.2
71.7
78.4
84
40.3
43.9
48.8
52.4
54.9
58.5
62.3
65.8
70.6
73.1
77.9
85.3
91.4
95
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
121
126
137
1
87.4
95.2
1
1
103.2
1
1
©
SOD series
All information provided in this document is subject to legal disclaimers.
WeEn Semiconductors Co., Ltd. 2020. All rights reserved
Product data sheet
23 December 2020
2 / 7
WeEn Semiconductors
SOD series
200W Transient Voltage Suppressor
Uni-directional
Bi-directional
Ipp
IT
IR
Vc VBR
VR
Vc VBR
VR
V
V
IR
IT
IR
IT
VRVBR Vc
VF
Ipp
Ipp
Fig. 1. I-V curve characteristics; Uni-directional
Fig. 2. I-V curve characteristics; Bi-directional
I
(P%P )
tr = 10 μs
100
50
0
Peak Value IPP
Half Value IPP/2
tp
10 x 1000 Waveform
as defined be R.E.A
3
0
1
2
tp (ms)
Fig. 3. Peak pulse power derating curve
Fig. 4. Pulse waveform
40
Tj = 25°C
IFSM
(A)
Non-repetitive pulse waveform
shown in pulse waveform graph
Pulse width 8.3ms
single half sine-wave
30
20
10
0
1
2
10
number of cycles at 60Hz
10
Fig. 5. Peak pulse power rating curve
Fig. 6. Maximum non-repetitive surge current
©
SOD series
All information provided in this document is subject to legal disclaimers.
WeEn Semiconductors Co., Ltd. 2020. All rights reserved
Product data sheet
23 December 2020
3 / 7
WeEn Semiconductors
SOD series
200W Transient Voltage Suppressor
SOD xx xx
Uni-directional V=0V
A: Uni-directional
CA: Bi-directional
Bi-directional V=0V
Reverse Standard off Voltage VR
Product series
Fig. 7. Typical junction capacitance
Fig. 8. Part numbering
XX:Product Type Marking Code
XXJYW
Trace Code Marking
Cathode band
(for uni-directional products only)
J: Fab & Assembly location Code
Y: Year Code
W: Week Code
Fig. 9. Part marking
©
SOD series
All information provided in this document is subject to legal disclaimers.
WeEn Semiconductors Co., Ltd. 2020. All rights reserved
Product data sheet
23 December 2020
4 / 7
WeEn Semiconductors
SOD series
200W Transient Voltage Suppressor
7. Package outline
SOD123
©
SOD series
All information provided in this document is subject to legal disclaimers.
WeEn Semiconductors Co., Ltd. 2020. All rights reserved
Product data sheet
23 December 2020
5 / 7
WeEn Semiconductors
SOD series
200W Transient Voltage Suppressor
Right to make changes — WeEn Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
8. Legal information
Suitability for use — WeEn Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical
or safety-critical systems or equipment, nor in applications where failure
or malfunction of an WeEn Semiconductors product can reasonably
be expected to result in personal injury, death or severe property or
environmental damage. WeEn Semiconductors and its suppliers accept no
liability for inclusion and/or use of WeEn Semiconductors products in such
equipment or applications and therefore such inclusion and/or use is at the
customer’s own risk.
Data sheet status
Document
Product
Definition
status [1][2] status [3]
Objective
[short] data
sheet
Development This document contains data from
the objective specification for product
development.
Preliminary
[short] data
sheet
Qualification This document contains data from the
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
preliminary specification.
Product
[short] data
sheet
Production
This document contains the product
specification.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. WeEn Semiconductors makes
no representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
[1
lease consult the most recently issued document before initiating or
P
completing a design.
]
Customers are responsible for the design and operation of their applications
and products using WeEn Semiconductors products, and WeEn
Semiconductors accepts no liability for any assistance with applications or
customer product design. It is customer’s sole responsibility to determine
whether the WeEn Semiconductors product is suitable and fit for the
customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.ween-semi.com.
Definitions
WeEn Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default
in the customer’s applications or products, or the application or use by
customer’s third party customer(s). Customer is responsible for doing all
necessary testing for the customer’s applications and products using WeEn
Semiconductors products in order to avoid a default of the applications
and the products or of the application or use by customer’s third party
customer(s). WeEn does not accept any liability in this respect.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. WeEn Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local WeEn
Semiconductors sales office. In case of any inconsistency or conflict with the
short data sheet, the full data sheet shall prevail.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
WeEn Semiconductors and its customer, unless WeEn Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the WeEn Semiconductors product
is deemed to offer functions and qualities beyond those described in the
Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Non-automotive qualified products — Unless this data sheet expressly
states that this specific WeEn Semiconductors product is automotive
qualified, the product is not suitable for automotive use. It is neither qualified
nor tested in accordance with automotive testing or application requirements.
WeEn Semiconductors accepts no liability for inclusion and/or use of non-
automotive qualified products in automotive equipment or applications.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, WeEn Semiconductors does not
give any representations or warranties, expressed or implied, as to the
accuracy or completeness of such information and shall have no liability for
the consequences of use of such information. WeEn Semiconductors takes
no responsibility for the content in this document if provided by an information
source outside of WeEn Semiconductors.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without WeEn Semiconductors’ warranty
of the product for such automotive applications, use and specifications, and
(b) whenever customer uses the product for automotive applications beyond
WeEn Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies WeEn Semiconductors for
any liability, damages or failed product claims resulting from customer
design and use of the product for automotive applications beyond WeEn
Semiconductors’ standard warranty and WeEn Semiconductors’ product
specifications.
In no event shall WeEn Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, WeEn Semiconductors’ aggregate and cumulative liability
towards customer for the products described herein shall be limited in
accordance with the Terms and conditions of commercial sale of WeEn
Semiconductors.
©
SOD series
All information provided in this document is subject to legal disclaimers.
WeEn Semiconductors Co., Ltd. 2020. All rights reserved
Product data sheet
23 December 2020
6 / 7
WeEn Semiconductors
SOD series
200W Transient Voltage Suppressor
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
SOD series
All information provided in this document is subject to legal disclaimers.
WeEn Semiconductors Co., Ltd. 2020. All rights reserved
Product data sheet
23 December 2020
7 / 7
相关型号：
©2020 ICPDF网 联系我们和版权申明