概述
数据手册SI7434DP 概述
N-Channel 250-V (D-S) MOSFET N沟道250 -V （D -S ）的MOSFET
SI7434DP 数据手册
通过下载SI7434DP数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载SPICE Device Model Si7434DP
Vishay Siliconix
N-Channel 250-V (D-S) MOSFET
CHARACTERISTICS
• N-Channel Vertical DMOS
• Macro Model (Subcircuit Model)
• Level 3 MOS
• Apply for both Linear and Switching Application
• Accurate over the −55 to 125°C Temperature Range
• Model the Gate Charge, Transient, and Diode Reverse Recovery
Characteristics
DESCRIPTION
The attached spice model describes the typical electrical
characteristics of the n-channel vertical DMOS. The subcircuit
model is extracted and optimized over the −55 to 125°C
temperature ranges under the pulsed 0-V to 10-V gate drive. The
saturated output impedance is best fit at the gate bias near the
threshold voltage.
A novel gate-to-drain feedback capacitance network is used to model
the gate charge characteristics while avoiding convergence difficulties
of the switched Cgd model. All model parameter values are optimized
to provide a best fit to the measured electrical data and are not
intended as an exact physical interpretation of the device.
SUBCIRCUIT MODEL SCHEMATIC
This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate
data sheet of the same number for guaranteed specification limits.
www.vishay.com
Document Number: 72666
S-60147Rev. B, 13-Feb-06
1
SPICE Device Model Si7434DP
Vishay Siliconix
SPECIFICATIONS (TJ = 25°C UNLESS OTHERWISE NOTED)
Simulated
Data
Measured
Data
Parameter
Symbol
Test Condition
Unit
Static
Gate Threshold Voltage
On-State Drain Currenta
VGS(th)
ID(on)
1.6
38
V
A
V
DS = VGS, ID = 250 µA
VDS ≥ 5 V, VGS = 10 V
VGS = 10 V, ID = 3.8 A
0.131
0.133
7
0.129
0.131
14
Drain-Source On-State Resistancea
rDS(on)
Ω
V
GS = 6 V, ID = 3.7 A
Forward Transconductancea
Forward Voltagea
gfs
VDS = 15 V, ID = 3.8 A
IS = 2.8 A, VGS = 0 V
S
V
VSD
0.82
0.75
Dynamicb
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Qg
Qgs
Qgd
td(on)
tr
35.5
6.8
10.5
11
34
6.8
10.5
16
V
DS = 100 V, VGS = 10 V, ID = 3.8 A
nC
ns
19
23
VDD = 100 V, RL = 25 Ω
I
D ≅ 4 A, VGEN = 10 V, RG = 6 Ω
Turn-Off Delay Time
Fall Time
td(off)
tf
30
47
43
19
Notes
a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2%.
b. Guaranteed by design, not subject to production testing.
www.vishay.com
Document Number: 72666
S-60147Rev. B, 13-Feb-06
2
SPICE Device Model Si7434DP
Vishay Siliconix
COMPARISON OF MODEL WITH MEASURED DATA (TJ=25°C UNLESS OTHERWISE NOTED)
www.vishay.com
Document Number: 72666
S-60147Rev. B, 13-Feb-06
3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
SI7434DP 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| SI7434DP-T1-E3 | VISHAY | N-CHANNEL 250-V (D-S) MOSFET | 获取价格 |
|
| SI7434DP-T1-GE3 | VISHAY | Trans MOSFET N-CH 250V 2.3A 8-Pin PowerPAK SO T/R | 获取价格 |
|
| SI7434DP_06 | VISHAY | N-Channel 250-V (D-S) MOSFET | 获取价格 |
|
| SI7436DP-T1-E3 | VISHAY | TRANSISTOR 24.5 A, 30 V, 0.0062 ohm, N-CHANNEL, Si, POWER, MOSFET, POWERPAK, SO-8, FET General Purpose Power | 获取价格 |
|
| SI7439DP | VISHAY | P-Channel 150-V (D-S) MOSFET | 获取价格 |
|
| SI7439DP-T1-E3 | VISHAY | P-Channel 150-V (D-S) MOSFET | 获取价格 |
|
| SI7439DP-T1-GE3 | VISHAY | Trans MOSFET P-CH 150V 3A 8-Pin PowerPAK SO T/R | 获取价格 |
|
| SI7439DP_05 | VISHAY | P-Channel 150-V (D-S) MOSFET | 获取价格 |
|
| SI7440DP | VISHAY | N-Channel 30-V (D-S) Fast Switching MOSFET | 获取价格 |
|
| SI7440DP-E3 | VISHAY | TRANSISTOR 12 A, 30 V, 0.0065 ohm, N-CHANNEL, Si, POWER, MOSFET, POWERPAK, SO-8, FET General Purpose Power | 获取价格 |
|
SI7434DP 相关文章
探究驱动器、开关与激光二极管对提升激光雷达性能的作用
- 2025-02-26
- 81
利用数字预失真技术打造超精准信号发生器
- 2025-02-26
- 91
英伟达挑战欧盟反垄断调查：起诉质疑Run:ai收购案的调查
- 2025-02-26
- 63
英特尔18A工艺良率仅20%~30%，下半年量产计划面临挑战
- 2025-02-26
- 60
