AMEQR50N-50100Z [AIMTEC]
up to 1000mA | AC-DC LED driver;型号: | AMEQR50N-50100Z |
厂家: | AIMTEC |
描述: | up to 1000mA | AC-DC LED driver |
文件: | 总4页 (文件大小:418K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series AMEQR50N-Z
up to 1000mA | AC-DC LED driver
FEATURES:
• Universal Input: 90~305 VAC
• High Efficiency: Up to 88%
• Active Power Factor Correction
• Short Circuit / Open Circuit Protection
•
•
•
•
IP65/67 Design for outdoor application
Long Life, High reliability
Ultra-low ripple without flickering
5-year limited warranty
Models
Single output
Max Output
Power (W)
50
Output Voltage
Range (V)
36-50
Output Current
(mA)
1000
Input Voltage
(VAC/Hz)
90-305/47-63
Efficiency
(%)
Model
AMEQR50N-50100Z
88.0
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity <75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters
Input Current
Conditions
Typical
Maximum
0.80
40
Units
Arms
90 VAC, full load
115 VAC, cold start
230 VAC, cold start
Inrush current <2ms
A
60
0.75
1.5
Leakage current
Input dissipation
mA
W
No Load
Output Short
4.5
W
115 VAC, full load
230 VAC, full load
0.98
0.95
Power Factor
Input Fuse
2.0A / 300V
115 VAC, full load
230 VAC, full load
1.5
1.0
Sec.
Sec.
Start-up Time
Output Specifications
Parameters
Current accuracy
Line regulation
Conditions
Typical
Maximum
Units
%
%
±5
±3
±5
LL to HL
Full Output Voltage Range
Load regulation
%
Ripple & Noise
Output Current Ripple
200
50
mV p-p
mA
Full load
LL to HL, full load at cold start,
% of rated output current
Current Overshoot
15
%
Hold-up time (min)
Current adjustment range
Minimum Load Voltage
0.5
NA
ms
%
NA
See Models Table Above
Isolation Specifications
Parameters
Conditions
I/P – O/P
I/P – FG
O/P – FG
500Vdc
Typical
Rated
3750
2000
500
Units
VAC
VAC
VAC
Tested I/O voltage
Isolation Resistance
Isolation Capacitance
>100
MΩ
pF
3000
General Specifications
Parameters
Switching frequency
Over voltage protection
Conditions
Typical
Maximum
Units
KHz
V
150
63
www.aimtec.com
F 052.1e R3
Tel: +1 514 620 2722
1 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only
Series AMEQR50N-Z
up to 1000mA | AC-DC LED driver
Short circuit protection
Short circuit restart
Open circuit protection
Operating temperature
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Humidity
Case material
IP Rating
Weight
Continuous, Hiccup Mode
Auto Recovery
Continuous, Hiccup Mode
-40 to +60
Without Derating
oC
oC
90
-40 to +85
oC
0.03
90
% / oC
Free Air Convection
% RH
g
Metal (Aluminum)
IP67
750
Dimensions (L X W+ X H)
MTBF
4.88 X 3.57 X 1.75 inches 124.0 X 90.6 X 44.5 mm
> 400,000 hrs (MIL-HDBK-217F at +25°C)
Safety Specifications
Parameters
Electromagnetic Interference
Harmonic Current Emissions
EN55015 / FCC Part 15, Class B
EN61000-3-2, Class B
EN61000-3-3
EN61000-4-2, 8kV Air, 4kV Contact, Level 3, Criteria A
EN61000-4-3, Test-RS Level 3, Criteria A
EN61000-4-4, Burst EFT Level 3, Criteria A
EN61000-4-5, Line to Neutral 4kV, Neutral to FG 6kV
EN61000-4-6. Test-CS Level 3, Criteria A
EN61000-4-8, Test 3A/m, Criteria A
Voltage fluctuations and flicker
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient / Burst Immunity
Surge Immunity
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
Standards
EN61000-4-11, Criteria B
Electromagnetic Immunity Requirements Applies EN61547
to Lighting Equipment
Pin Definition
Wire
Blue
Pin
AC N
Brown
AC L
Yellow/Green
Red
FG
+V Output
-V Output
Black
Input Wire specifications: H05RN-F 0.75mm2
Output Wire specifications: H05RN-F 1.0mm2
www.aimtec.com
F 052.1e R3
Tel: +1 514 620 2722
2 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only
Series AMEQR50N-Z
up to 1000mA | AC-DC LED driver
Dimensions
Left View
Top View
44.5±0.3
1.75±0.01
90.0±0.30
17.0
17.0
0.67
3.54±0.01
0.67
20.0
0.79
45.3
1.78
90.6±0.30
3.57±0.01
260±20
10.24±0.08
8.00
0.31
5.0±1.0
0.20±0.04
5.00
0.20
7.70
0.30
45.3
1.78
R5.00X4
0.20X4
Side View
44.5±0.30
1.75±0.01
Application circuit
AC_L
LED+
LED-
FG
AC
AC_N
www.aimtec.com
F 052.1e R3
Tel: +1 514 620 2722
3 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only
Series AMEQR50N-Z
up to 1000mA | AC-DC LED driver
Efficiency Vs. Input Voltage & Output Current (Constant current load)
95.00%
90.00%
85.00%
80.00%
75.00%
70.00%
65.00%
115 VAC
230 VAC
277 VAC
36
38
40
42
44
46
48
50
Output Voltage(V)
PF Vs. Input Voltage & Output Current (Constant current load)
1.200
0.900
115 VAC
230 VAC
277 VAC
0.600
0.300
0.000
36
38
40
42
44
46
48
50
Output Voltage(V)
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052.1e R3
Tel: +1 514 620 2722
4 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only
相关型号:
AMER120-24500AZ-F
AC/DC LED Driver; Product Weight (grams): 900; Input voltage min (V): 90; Input voltage max (V): 305; Input frequency (Hz): 47-440; Output voltage min: 12; Output voltage max: 24; Output voltage dual assymetric (y/n): Single; Output Power (W): 120; Max Output current (A): 0-5; Efficiency (%): 86; Package type: Encapsulated; Rating (IP): IP68; Mounting: Wire terminal; W (in): 1.85; L (in): 7.13; H (in): 2.32; W (mm): 47; L (mm): 181; H (mm): 59; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VAC): 3000; EMC compliance 1: EN 55022 Class B; Case material: Aluminum
AIMTEC
©2020 ICPDF网 联系我们和版权申明