CSPEMI306AG 概述
6 Channel EMI Filter Array with ESD Protection 带ESD保护6通道EMI滤波器阵列 数据线路滤波器
CSPEMI306AG 规格参数
是否Rohs认证: | 符合 | 生命周期: | Transferred |
Reach Compliance Code: | unknown | ECCN代码: | EAR99 |
HTS代码: | 8504.50.80.00 | 风险等级: | 5.28 |
其他特性: | CUT-OFF FREQUENCY 58 MHZ; PI-TYPE CIRCUIT | 电容: | 30 µF |
最大直流电阻: | 120 Ω | 滤波器类型: | DATA LINE FILTER |
高度: | 0.649 mm | JESD-609代码: | e1 |
长度: | 3.005 mm | 安装类型: | SURFACE MOUNT |
功能数量: | 6 | 最高工作温度: | 85 °C |
最低工作温度: | -40 °C | 输出阻抗: | 50 OHM Ω |
包装方法: | TAPE AND REEL | 物理尺寸: | L3.005XB1.375XH0.649 (mm)/L0.1183XB0.0541XH0.0256 (inch) |
端子面层: | Tin/Silver/Copper (Sn/Ag/Cu) | 宽度: | 1.375 mm |
Base Number Matches: | 1 |
CSPEMI306AG 数据手册
通过下载CSPEMI306AG数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载CSPEMI306A
6 Channel EMI Filter Array with ESD Protection
Features
Product Description
•
•
Six channels of EMI filtering for data ports
Pi-style EMI filters in a capacitor-resistor-capacitor
(C-R-C) network
Greater than 32dB attenuation at 1GHz
+15kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
+30kV ESD protection on each channel (HBM)
Chip Scale Package features extremely low
lead inductance for optimum filter and ESD
performance
The CSPEMI306A is a six channel low-pass filter array
that reduces EMI/RFI emissions while at the same time
providing ESD protection. It is used on data ports on
mobile devices. To reduce EMI/RFI emissions, the
CSPEMI306A integrates a pi-style filter (C-R-C) for
each of the 6 channels. Each high quality filter provides
greater than 30dB attenuation in the 800-2700 MHz
range. These pi-style filters also support bidirectional
filtering, controlling EMI both to and from a data port
connector.
•
•
•
•
•
•
15-bump, 2.960mm X 1.330mm footprint
Chip Scale Package (CSP)
Lead-free version available
In addition, the CSPEMI306A provides a very high
level of protection for sensitive electronic components
that may be subjected to electrostatic discharge (ESD).
The input pins are designed and characterized to
safely dissipate ESD strikes of 15kV, exceeding the
maximum requirement of the IEC 61000-4-2 interna-
tional standard. Using the MIL-STD-883 (Method 3015)
specification for Human Body Model (HBM) ESD, the
device provides protection for contact discharges to
greater than 30kV.
Applications
•
EMI filtering and ESD protection for both data
and I/O ports
Wireless Handsets
Handheld PCs / PDAs
MP3 Players
•
•
•
•
•
The CSPEMI306A is particularly well suited for porta-
ble electronics (e.g., cellular telephones, PDAs, note-
book computers) because of its small package footprint
and low weight. The CSPEMI306A is available in a
space-saving, low-profile Chip Scale Package with
optional lead-free finishing.
Notebooks
Desktop PCs
Electrical Schematic
100Ω
FILTERn*
FILTERn*
30pF
30pF
GND
(Pins B1-B3)
1 of 6 EMI/RFI + ESD Channels
* See Package/Pinout Diagram for expanded pin information.
© 2003 California Micro Devices Corp. All rights reserved.
10/10/03 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
1
CSPEMI306A
PACKAGE / PINOUT DIAGRAMS
BOTTOM VIEW
TOP VIEW
(Bumps Up View)
(Bumps Down View)
Orientation
Marking
1
2
3
4
5
6
(see note 2)
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
C1
C2
C3
C4
C5
C6
A
B
C
GND
GND
GND
B1
B2
B3
306A
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
Orientation
Marking
A1
A2
A3
A4
A5
A6
A1
CSPEMI306A
CSP Package
Notes:
1) These drawings are not to scale.
2) Lead-free devices are specified by using a "+" character for the top side orientation mark.
PIN DESCRIPTIONS
PIN(s)
A1
NAME
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
GND
DESCRIPTION
Filter Channel 1
Filter Channel 2
Filter Channel 3
Filter Channel 4
Filter Channel 5
Filter Channel 6
Device Ground
Filter Channel 1
Filter Channel 2
Filter Channel 3
Filter Channel 4
Filter Channel 5
Filter Channel 6
A2
A3
A4
A5
A6
B1-B3
C1
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
C2
C3
C4
C5
C6
Ordering Information
PART NUMBERING INFORMATION
2
Standard Finish
Lead-free Finish
Ordering Part
Ordering Part
1
1
Bumps
Package
Number
Part Marking
Number
Part Marking
15
CSP
CSPEMI306A
306A
CSPEMI306AG
306A
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Note 2: Lead-free devices are specified by using a "+" character for the top side orientation mark.
© 2003 California Micro Devices Corp. All rights reserved.
2
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
10/10/03
CSPEMI306A
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
Storage Temperature Range
DC Power per Resistor
DC Package Power Rating
-65 to +150
100
°C
mW
mW
600
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
Operating Temperature Range
-40 to +85
°C
1
ELECTRICAL OPERATING CHARACTERISTICS
SYMBOL PARAMETER
CONDITIONS
At 2.5V DC
At 2.5V DC
MIN
80
TYP
100
MAX
120
36
UNITS
Ω
R
Resistance
C
Capacitance
24
30
pF
TCR
TCC
Temperature Coefficient of Resistance
Temperature Coefficient of Capacitance
Diode Voltage (reverse bias)
1200
-300
ppm/°C
ppm/°C
V
V
I
=10µA
DIODE
5.5
DIODE
I
Diode Leakage Current (reverse bias)
V
=3.3V
DIODE
100
nA
LEAK
V
Signal Voltage
Positive Clamp
Negative Clamp
I
= 10mA
LOAD
SIG
5.6
-0.4
6.8
-0.8
9.0
-1.5
V
V
V
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
Notes 2,4 and 5
ESD
30
15
kV
kV
b) Contact Discharge per IEC 61000-4-2
Level 4
V
Clamping Voltage during ESD Discharge
MIL-STD-883 (Method 3015), 8kV
Positive Transients
Notes 2,3,4 and 5
CL
C
+10
-5
V
V
Negative Transients
f
Cut-off frequency
R = 100Ω, C = 30pF
58
MHz
Z
= 50Ω, Z
= 50Ω
LOAD
SOURCE
Note 1: TA=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A1,
then clamping voltage is measured at Pin C1.
Note 4: Unused pins are left open
Note 5: These parameters are guaranteed by design and characterization.
© 2003 California Micro Devices Corp. All rights reserved.
10/10/03 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 L Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
3
CSPEMI306A
Performance Information
Typical Filter Performance (T =25°C, DC Bias=0V, 50 Ohm Environment)
A
Figure 1. Insertion Loss VS. Frequency (A1-C1 to GND B2)
Figure 2. Insertion Loss VS. Frequency (A2-C2 to GND B2)
© 2003 California Micro Devices Corp. All rights reserved.
4
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
10/10/03
CSPEMI306A
Performance Information (cont’d)
Typical Filter Performance (T =25°C, DC Bias=0V, 50 Ohm Environment)
A
Figure 3. Insertion Loss VS. Frequency (A3-C3 to GND B2)
Figure 4. Insertion Loss VS. Frequency (A4-C4 to GND B2)
© 2003 California Micro Devices Corp. All rights reserved.
10/10/03 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 L Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
5
CSPEMI306A
Performance Information (cont’d)
Typical Filter Performance (T =25°C, DC Bias=0V, 50 Ohm Environment)
A
Figure 5. Insertion Loss VS. Frequency (A5-C5 to GND B2)
Figure 6. Insertion Loss VS. Frequency (A6-C6 to GND B2)
© 2003 California Micro Devices Corp. All rights reserved.
6
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
10/10/03
CSPEMI306A
Performance Information (cont’d)
Typical Filter Performance (T =25°C, DC Bias=0V, 50 Ohm Environment)
A
Figure 7. Comparison of Filter Response Curves for CSPEMI306A VS. DC Bias
© 2003 California Micro Devices Corp. All rights reserved.
10/10/03 430 N. McCarthy Blvd., Milpitas, CA 95035-5112 L Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
7
CSPEMI306A
Performance Information (cont’d)
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
T = -40C
T = +25C
T = +70C
0
1
2
3
4
5
DC Input Voltage (V)
Figure 8. Filter Capacitance vs. Input Voltage over Temperature
(normalized to capacitance at 2.5VDC and 25°C)
1.100
1.080
1.060
1.040
1.020
1.000
0.980
0.960
0.940
0.920
0.900
-40
-20
0
20
40
60
80
100
Temperature ['C]
Figure 9. Resistance vs. Temperature
(normalized to resistance at 25°C)
© 2003 California Micro Devices Corp. All rights reserved.
8
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
10/10/03
CSPEMI306A
Application Information
Refer to Application Note AP-217, "The Chip Scale
Package", for a detailed description of Chip Scale
Packages offered by California Micro Devices.
PRINTED CIRCUIT BOARD RECOMMENDATIONS
PARAMETER
VALUE
Pad Size on PCB
0.275mm
Round
Pad Shape
Pad Definition
Non-Solder Mask defined pads
0.325mm Round
0.125 - 0.150mm
0.330mm Round
50/50 by volume
No Clean
Solder Mask Opening
Solder Stencil Thickness
Solder Stencil Aperture Opening (laser cut, 5% tapered walls)
Solder Flux Ratio
Solder Paste Type
Pad Protective Finish
OSP (Entek Cu Plus 106A)
+50µm
Tolerance — Edge To Corner Ball
Solder Ball Side Coplanarity
Maximum Dwell Time Above Liquidous
Soldering Maximum Temperature
+20µm
60 seconds
260°C
Non-Solder Mask Defined Pad
0.275mm DIA.
Solder Stencil Opening
0.330mm DIA.
Solder Mask Opening
0.325mm DIA.
Figure 10. Recommended Non-Solder Mask Defined Pad Illustration
250
200
150
100
50
0
1:00.0
2:00.0
3:00.0
4:00.0
Time (minutes)
Figure 11. Eutectic (SnPb) Solder
Ball Reflow Profile
Figure 12. Lead-free (SnAgCu) Solder
Ball Reflow Profile
© 2003 California Micro Devices Corp. All rights reserved.
10/10/03 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
9
CSPEMI306A
Mechanical Details
CSP Mechanical Specifications
Mechanical Package Diagrams
CSPEMI306A devices are packaged in a custom Chip
Scale Package (CSP). Dimensions are presented
below. For complete information on CSP packaging,
see the California Micro Devices CSP Package Infor-
mation document.
BOTTOM VIEW
A1
SIDE
VIEW
B2
B1
C1
C
B
A
PACKAGE DIMENSIONS
Package
Bumps
Custom CSP
15
1
2
3
4
5
6
Millimeters
Nom Max
Inches
Nom
D1
D2
Dim
0.30 DIA.
63/37 Sn/Pb (Eutectic) or
96.8/2.6/0.6 Sn/Ag/Cu (Lead-free)
SOLDER BUMPS
Min
Min
Max
A1
A2
B1
B2
B3
B4
C1
C2
D1
D2
2.915 2.960 3.005 0.1148 0.1165 0.1183
1.285 1.330 1.375 0.0506 0.0524 0.0541
0.495 0.500 0.505 0.0195 0.0197 0.0199
0.245 0.250 0.255 0.0096 0.0098 0.0100
0.430 0.435 0.440 0.0169 0.0171 0.0173
0.430 0.435 0.440 0.0169 0.0171 0.0173
0.180 0.230 0.280 0.0071 0.0091 0.0110
0.180 0.230 0.280 0.0071 0.0091 0.0110
0.561 0.605 0.649 0.0221 0.0238 0.0255
0.355 0.380 0.405 0.0140 0.0150 0.0159
DIMENSIONS IN MILLIMETERS
Package Dimensions for
CSPEMI306A Chip Scale Package
# per tape and
reel
3500 pieces
Controlling dimension: millimeters
CSP Tape and Reel Specifications
POCKET SIZE (mm)
B X A X K
TAPE WIDTH
W
REEL
DIAMETER
QTY PER
REEL
P
P
1
PART NUMBER
CHIP SIZE (mm)
0
0
0
0
CSPEMI306A
2.96 X 1.33 X 0.6
3.10 X 1.45 X 0.74
8mm
178mm (7")
3500
4mm 4mm
10 Pitches Cumulative
Tolerance On Tape
0.2 mm
P
o
Top
Cover
Tape
A
o
W
B
o
K
o
For Tape Feeder Reference
Embossment
Only including Draft.
P
Center Lines
of Cavity
1
Concentric Around B.
User Direction of Feed
Figure 13. Tape and Reel Mechanical Data
© 2003 California Micro Devices Corp. All rights reserved.
10 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L
Tel: 408.263.3214
L
Fax: 408.263.7846
L
www.calmicro.com
10/10/03
CSPEMI306AG 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
CSPEMI307A | CALMIRCO | 4-Channel ESD/EMI Filter Array plus 4-Channel ESD Array for USB | 获取价格 | |
CSPEMI307A | ONSEMI | 4-Channel ESD/EMI Filter Array Plus 4-Channel ESD Array for USB | 获取价格 | |
CSPEMI307AG | CALMIRCO | 4-Channel ESD/EMI Filter Array plus 4-Channel ESD Array for USB | 获取价格 | |
CSPEMI307AG | ONSEMI | 4-Channel ESD/EMI Filter Array Plus 4-Channel ESD Array for USB | 获取价格 | |
CSPEMI400 | CALMIRCO | SIM Card EMI Filter Array with ESD Protection | 获取价格 | |
CSPEMI400 | ONSEMI | SIM Card EMI Filter Array with ESD Protection | 获取价格 | |
CSPEMI400G | CALMIRCO | SIM Card EMI Filter Array with ESD Protection | 获取价格 | |
CSPEMI400G | ONSEMI | SIM Card EMI Filter Array with ESD Protection | 获取价格 | |
CSPEMI606 | CALMIRCO | LCD EMI Filter Array with ESD Protection | 获取价格 | |
CSPEMI606G | CALMIRCO | LCD EMI Filter Array with ESD Protection | 获取价格 |
CSPEMI306AG 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6